Problem with ATI BizView, 64 bit Win7 & Dell R310

Similar Questions

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• problems with ati radeon x 600 in dc7600

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  cpu201 wrote:
  

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  Hello

  I suggest to remove the card, reinstall the drivers for the integrated graphics card and using the onboard graphics for a week as a test.

  If the white screen start and stops disappear then you have found the culprit.

  If you do not need higher resolution graphics, you are definitely better with the embedded video solution. I suggest using the original drivers.

  What dc7600 do you have? (CMT, SFF, or ultra-Slim form factor are the three versions)

  Best regards

  ERICO

• Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.

  original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGES

  On HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection.  for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem.  SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes.  I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work.  I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work.  I have no HP manufacturer disk to reload the Vista operating system.  The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not.   What can I do to fix this problem in Vista?  Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer.    Thanks in advance.

  Imrand - Thanks for the tip, I tried it & it didn't work.  However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed.  The Web connection is still good after several cycles of closing & reboot.  I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up.  Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query.  Total BS of Vista, which has compounded the problem than he was.  I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems.  The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite.  Microsoft had to quit with it, IMO.

  Thanks for your help, Cimarron

• Problem with Win 7 64 bit OS and itunes with the corefoundation.dll?

  I am running Win 7 64 bit OS. When you try to run iTunes I get error message: the program cannot start because corefoundation.dll is missing. Try to reinstall to see if that solves this problem.
  is there a problem with itunes and Win 7 64 bit? or by reinstalling the dll file fix?

  Uninstall and reinstall hopefully should solve your problem.

  MobileMe: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert
  http://support.Apple.com/kb/TS2211

  How to fix Corefoundation.dll errors
  http://www.dll-error-fixes.com/resolve-corefoundationdll-missing-errors/

  Have you tried right-clicking on the program.exe Setup and selecting "Run As Administrator" option?

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

• Problem with Windows 7 64 bit box

  Hello

  I have a dell inspiron 545MT with integrated hi-definition audio channels that came included

  I downloaded the HD audio driver on the dell site.

  I recently bought a pair of speakers Philips SPA7360 consisting of a subwoofer + 2 satellite.

  These works out of the box, plugged into the subwoofer low socket in Linux, so this is not a problem with the speakers

  To juggle with the HD controller under windows, I see

  stereo (which gives no sound)

  Quad-n/a

  5.1 + 7.1, where the left satellite loudspeaker works as the speaker "centre" and the right hand as the subwoofer in the tests... but on trying to play... There is no sound

  I only use windows for netflix and at the present time, can use the line-out socket which gives only through his right satellite speaker.

  Please note that I have reinstalled windows many times in the past without having to install the drivers from the CD, so I hope that's not the question

  Yes, it seems that you have a problem with this decision.

• Strange problem with ATI HD5470 rendering

  Hello

  I have a HP Pavilion dv7 laptop with ATI HD5470 graphics. I accidentally use this laptop for games (with a strong cooling block) and I never had any problems yet.

  However, in some games the crazy graphics with vector of random color all over the place that makes the game unplayable. I have provided some screenshots of a game at random, that I tried to play before.

  This took place in other games, couple more of them being produced in small game studios (perhaps due to a mistake of optimization on their side?). Someone else had this problem or knows the reason for this? Thanks in advance

  

  I solved the problem. In case anyone faced this problem in the future, here is the solution:

  1. open the Catalyst Control Center (for ATI cards)

  2. click on options in the upper right corner of the window of the CCC

  3. go to preferences-> Restore Factory Defaults...

  4 confirm

  I found this solution on the ATI forums and has worked for me.

• several problems with adobe creative cloud desktop (win7/8)

  I installed the application adobe creative cloud on two computers, one with win 7 64 bit and the other a win 8. It works with any of them

  Win 7:

  I can start the application, log in and click the button install for my programs (Lightroom and Photoshop), but the bar for the State of the installation just stay at 0%. I tried twice, reinstalled the app, but it made no difference.

  I have an old installation of Photoshop CS6 and Lightroom 4.4 on this computer, this may cause of these problems? But I don't want to delete it, because otherwise I would have no photoshop at all to work with...

  Today I couldn't even start the creative cloud desktop application, you can click it but nothing happens.

  Win 8:

  I installed the creative cloud desktop application, I can start but I only get this blue spinning wheel and nothing happens. When I close the application, it will start again automatically 5 minutes later, of course with nothing past this wheel that turns, really boring after awhile.

  Please help me, I don't know what more can be done. And I don't want to remove the existing versions of Lightroom and Photoshop, because I need in my workflow every day :/

  Yes Daniel.

  You can try to download the application from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

• Linksys E8350 have problem with some latency every bit of packages

  Hello

  I have the problem with latency high each 6 pack when I try to ping IP of the router via wifi.

  $ ping 192.168.1.1
  PING 192.168.1.1 (192.168.1.1): 56 data bytes
  64 bytes from 192.168.1.1: icmp_seq = 0 ttl = 64 time = 3,437 ms
  64 bytes from 192.168.1.1: icmp_seq = 1 ttl = 64 time = 2,957 ms
  64 bytes from 192.168.1.1: icmp_seq = 2 ttl = 64 time = ms 3,392
  64 bytes from 192.168.1.1: icmp_seq = 3 ttl = 64 time = 3,715 ms
  64 bytes from 192.168.1.1: icmp_seq = 4 ttl = 64 time = 3,284 ms
  64 bytes from 192.168.1.1: icmp_seq = 5 ttl = 64 time = 386,280 ms
  64 bytes from 192.168.1.1: icmp_seq = 6 ttl = 64 time = 427,748 ms
  64 bytes from 192.168.1.1: icmp_seq = 7 ttl = 64 time = 53,266 ms
  64 bytes from 192.168.1.1: icmp_seq = 8 ttl = 64 time = 523,208 ms
  64 bytes from 192.168.1.1: icmp_seq = 9 ttl = 64 time = 3,666 ms
  64 bytes from 192.168.1.1: icmp_seq = 10 ttl = 64 time = 2,508 ms
  64 bytes from 192.168.1.1: icmp_seq = 11 ttl = 64 time = 3,440 ms
  64 bytes from 192.168.1.1: icmp_seq = 12 ttl = 64 time = ms 3,579
  64 bytes from 192.168.1.1: icmp_seq = 13 ttl = 64 time = 2,608 ms
  64 bytes from 192.168.1.1: icmp_seq = 14 ttl = 64 time = ms 3,154
  64 bytes from 192.168.1.1: icmp_seq = 15 ttl = 64 time = 326,885 ms
  64 bytes from 192.168.1.1: icmp_seq = 16 ttl = 64 time = 371,978 ms
  64 bytes from 192.168.1.1: icmp_seq = 17 ttl = 64 time = 2,855 ms
  64 bytes from 192.168.1.1: icmp_seq = 18 ttl = 64 time = 469,882 ms
  64 bytes from 192.168.1.1: icmp_seq = 19 ttl = 64 time = 2.841 ms
  64 bytes from 192.168.1.1: icmp_seq = 20 ttl = 64 time = 2,563 ms
  64 bytes from 192.168.1.1: icmp_seq = 21 ttl = 64 time = 2,477 ms
  64 bytes from 192.168.1.1: icmp_seq = 22 ttl = 64 time = 3,560 ms
  64 bytes from 192.168.1.1: icmp_seq = 23 ttl = 64 time = 3,572 ms
  64 bytes from 192.168.1.1: icmp_seq = 24 ttl = 64 time = 2,605 ms
  64 bytes from 192.168.1.1: icmp_seq = 25 ttl = 64 time = 278,522 ms
  64 bytes from 192.168.1.1: icmp_seq = 26 ttl = 64 time = 325,989 ms
  64 bytes from 192.168.1.1: icmp_seq = 27 ttl = 64 time = 687,060 ms
  64 bytes from 192.168.1.1: icmp_seq = 28 ttl = 64 time = 417,529 ms
  64 bytes from 192.168.1.1: icmp_seq = 29 ttl = 64 time = 2.659 ms

  Latest firmware 1.0.02.9. Router has been reset to factory default and firmware has been restored.

  It is made from material? You guys can recommend?

  I think that it is a Wireless Mac driver problem. I've seen this symptom in reverse when ping Mac from another computer on the network. My Mac Mini has similar problems and I have tested a lot of the router. The departure of ping well off the coast and then ramps up really bad and then cycles to good. I have found no solution but my Mac Mini is still usable and the flow seems good, just with a latency.

• Problems with the start-up of Win7 64 bit on Win Vista 32 bit

  I downloaded Windows 7 Ultimate 64-bit edition of msdn.com and he came. EXE format. I used Daemon Tools to open the file, because when I tried to open the. EXE, it says that I have not so much permision I opend the virtual dvd drive created by Daemon Tools, copied the files from there to the DVD - R disc costs and followed the steps microsoft provided on the how-to page. After that I restarted my computer with Win7 disc it gives me a black screen with flashing line in the upper left and then he start Win Vista normally.

  Hi Mkklincr8.

  You have the Windows 7 Pro who withdraws the offer of Win741? If so you can ask them for the iso instead of the exe version. Then, because you're going to Ultimate Pro, you will need to do a clean install.

  Matthieu Arkin - Microsoft Partner - http://twitter.com/Microsoft_Cares - all messages are "like what" without warranty of any kind, explicit or implicit

• Problem with HP Support Assistant on Win7 64-bit

  I have installed my HP Pavilion m9470gr support page hp support assistant. After installing, I ran the application.

  The application started normally, and it shows a window with the title "collection of information...". ». Then, the application does not respond even if the Task Manager indicates it is running.

  Can someone help, please? Thanks in advance.

  I appreciate your help, but I solved the problem yesterday by installing an earlier version of the hp support assistant (version 4.2.8.3). Thanks for your interest.

• Satellite L355 problems with ATI Radeon 3100

  It's my first post, but I've been lurking for a while I'm a big fan of Toshiba. I've owned a few and now the laptop more recent I'm causing me some problems.

  I recently bought a Toshiba Satellite L355D-S7829. I am running Windows 7 Ultimate and have updated with all the latest and greatest from Microsoft and Toshiba software. The problem I encounter is that no matter what I can not do the ATI Radeon 3100 graphics card to appear in my device settings, or anywhere in the system. What is looming is the "Mobile Intel (r) 4 series express chipset family" no matter what I do with the drivers on the Toshiba site.

  I looked for similar problems on here and on the web and have not been able to find an answer. I'm sure it's something simple I'm missing, but I am lost on what to do. My knowledge of laptops is not it, but I'm competent enough on desktop computers. I am sure that the ATI Radeon 3100 is a card on board and cannot be deleted? I got the used laptop and would really like to make it work so that I can play the games to the best of "capabilities.

  Thanks in advance for your help

  Hello

  Unfortunately, I can't say much to the problem described. As I see that you have a model of cell phone US and all the drivers available for the operating systems, you can find on WE support page.

  I put t know what version of Win7 you use, but you will find a suitable display driver 8.634.1 version.
  Have you already installed it.

• PROBLEM WITH WINDOWS 7 64 BIT & PRINTERS

  Hello

  My company is replacing all of our window xp machines and we head to widows 7 64-bit. We currently have a print under windows 2003 server.
  I downloaded the universal readers of hp windows 7 64 bit, the new drivers for a printer, goes \\servername, view the remote printers on a windows 7 64 bit pc, and adding drivers 64-bit configuration. On the print server, I can see in this printer, additional drivers x 64 windows XP and Windows Server 2003 driver installed.
  My first question is that correct? Shouldn´t I see something like windows 7?
  After that if I try to add the printer to the pc windows 7, is going to add a wireless network..., select a shared printer name, I always get the error as it is impossible to connect to the printer. Operation failed with error 0x0000007e.
  However if I try add, using a tcp/ip address or the hostname of the printer is installed ok.
  Is it possible that something to do with the driver? It is not picking up the right one?
  Thanks and rgs,
  Ricardo Mendes

  Hello

  This solution seems to have worked for multiple users.

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  To connect to your server, start "regedit" and go:

  HKLM\SYSTEM\CurrentControlSet\Control\Print\Printer

  And remove the key, "BIDI" again try to install your printer, it should work.

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617