Problem with < b > htmlText tag!

Similar Questions

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• Problem with XML CFX Tag...

  I just installed this in Java CFX tag:

  http://www.Zrinity.com/XML/XMLParser/

  When I run the example.cfm file I get this error:

  

  If for any reason any image showed no big enough see here:

  http://img687.imageshack.us/img687/1310/xmlparserproblem.jpg

  So why is it less can error out as this someone explain that I'm not familiar with this kind of error...

  It seems to me that obj is a WDDX packet, then you will have to make it return a struct before start you address as one.

  --

  Adam

• What is the problem with my div tag / site don't center...

  Hello

  I am re-design of a site, and I can't seem to focus.  I created a div and id tag it 'wrapper' and created a css rule.  I'm sure it's a simple mistake, but I can't understand it...

  Here are the CSS rules...

  @charset "UTF-8";

  / * CSS document * /.

  div, h1, h2, h3, h4, h5, h6, p, pre, address, blockquote, span, ul, ol, li, dl, dd, dt, ing {}

  margin: 0px;

  padding: 0px;

  }

  {#wrapper}

  margin: 0 auto;

  background-color: #9B9E6B;

  }

  UL {}

  list-style: none;

  }

  table #content1 {}

  background-color: #00 C;

  background-image: url(_images/content_bgrnd.png);

  background-repeat: no-repeat;

  do-family: "Arial Black", Gadget, without serif.

  font size: 20px;

  text-align: center;

  padding: 8px;

  }

  Here is the code for the site...

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > 104 Kiahuna < /title >

  < script type = "text/javascript" >

  <!--

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  ->

  < /script >

  < link href = "104.css" rel = "stylesheet" type = "text/css" / > "

  < / head >

  < body onload = "MM_preloadImages ('_images/buttinside1.jpg','_images/buttproperty1.jpg','_images/b uttactivities1.jpg','_images/buttdining1.jpg','_images/buttcontacts1.jpg','_images/home_lg 1.png','_images/home_lg2.png','_images/home_lg3.png','_images/home_lg4.png','_images/home_ lg5.png','_images/home_lg6.png','_images/home_lg7.png','_images/home_lg8.png')" >

  < div id = 'wrapper' >

  <! - header - >

  < table id = "header" >

  < div class = "header" > < img src = "_images/newLOGO.jpg" alt = "Kiahuna 104" width = "1000" / > ""

  < / div >

  <! - navigation table - >

  < table width = "1000" bgcolor = "000" >

  < b >

  < td width = "40" > < table >

  "< td width ="150"> < a href =" inside.htm"> < img src =" _images/butthome1.jpg ' alt = 'home1' name = 'home1' id = 'home1' / > < /a > < table >

  "" < td width = "150" > < img src = "_images/buttinside2.jpg" alt = "inside2" name = "inside2" id = "inside2" onmouseover ="MM_swapImage ('inside2'", ' _images/buttinside1.jpg', 1) ' MM_swapImgRestore "/ > < /a > < table >

  "" < td width = "150" > < a href = "property.htm" > < img src = "_images/buttproperty2.jpg" alt = "property2" name = 'property2' id = 'property2' onmouseover ="MM_swapImage ('Property2'", ' _images/buttproperty1.jpg', 1) ' MM_swapImgRestore "/ > < /a > < table >

  < td width = "150" > < a href = "activities.htm" > < img src = _images/buttactivities2.jpg"" alt = "nature2" name = "2" id = "2" onmouseover = "MM_swapImage ('2'", ' _images/buttactivities1.jpg', 1) ' MM_swapImgRestore"/ > < /a > < table >" "

  < td width = "150" > < a href = "dining.htm" > < img src = _images/buttdining2.jpg"" alt = "dining2" name = 'dining2' id = 'dining2' onmouseover = "MM_swapImage ('dining2',", ' _images/buttdining1.jpg', 1) ' MM_swapImgRestore"/ > < /a > < table >" "

  "< td width ="150"> < a href =" contact.htm"> < img src =" _images/buttcontacts2.jpg "alt ="contact2"name ="contact2"id ="contact2"onmouseover =" MM_swapImage ('contact2' ", ' _images/buttcontacts1.jpg', 1) ' MM_swapImgRestore" / > < /a > < table > "

  < /tr >

  < /table >

  <! - beginning of the height of the content1 371 = table - >

  < table = "content1" table width id = "1000" height = "371" >

  < b >

  < td width = "34" > < table >

  < td width = "897" > < p > blah blah blah. < /p >

  < class p 'center2' = > NEW: IN - CONDO WASHER & DRYER - COMPLETELY NEW FURNITURE < /p > < table >

  < td width = "53" > < table >

  < /tr >

  < /table >

  < / body >

  < / html >

  
  

  Remove the width of the Div in HTML and replace your CSS #wrapper with:

  {#wrapper}

  background-color: #000000;

  margin: 0 auto;

  Width: 1000px;

  }

  You had a comma in your CSS margin.

  Also:

  {body

  background-color: #000000;

  margin: 0;

  }

  will make the whole page black and remove your current white border around the outside of the page.

• Problem with TextArea htmlText and the height/num lines

  I am trying to create a text box showing the code html and auto sizes the height so that there is no scroll bar. I got this works with the .text property, although when using.htmlText, the values returned are broadly. Assuming that 'field' is in the text box, I use the following coding:

  var nlines:int is field.mx_internal::getTextField (.numLines);.

  And then to get the height of each line (assuming that I is the index of the line):

  var lineHeight:int is field.mx_internal::getTextField () .getLineMetrics (i) .height;.

  When you do it with .text, it works fine. The presentation of html in the TextArea, my value "nLigne" (the number of rows in the TextArea) return very high values. It seems as if numlinesrequired returns the amount of lines that the TextArea component would be if she didn't analyze the HTML code.

  What can I do to get the real value of numlinesrequired when you use htmlText? Thank you

  I saw numlinesrequired wrong until after rendering.  We use a callLater to get after.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Problem with anchor in Muse since update tags adapted

  Since the update of reagent in muse, I had problems with my anchor tags. Anchor tags on the pages created before the update very well work, but any new page that I created after the patch has problems. On many of my pages, I have a sidebar with links to sections of the same page (long). The anchor tag target the right section to the top of the page, but the farther down the anchor is on my page, targeting gets more inaccurate. Also, I noticed that targeting was incompatible to a browser. The site is a layout fixed, do not respond, and I don't know why this is happening or how to fix it.  Help, please!

  See this discussion for any ideas, links to anchors jump instead of scrolling

• Problems with tags custom .css and Internet Explorer

  Hello

  I'm new to these forums, but I've been coding market for about 12 years.  I am currently desiging a Web site for my place of work, and I'm having a lot of problems with Internet Explorer.  It is not our main browser, but I want to assure you that the site looks decent on almost all platforms, and I really have a problem with IE (to test the page using IE v8).

  There are a few problems, but I want to ask about this first (I use Dreamweaver CS5.5 btw):

  I made labels custom text (t1, t2, t3, t4) because I don't like the spacing you get from h1, h2, h3, etc.  In any case, I set these tags in my .css file and placed the tags in my html file.  Everything works fine in Firefox, Chrome and Safari, but IE COMPLETELY refuses to recognize all the tags and so the formatting.  I'm pasting below the relevant extracts from the code and the appearance of the code in firefox vs IE.

  First the html code:

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <meta name="viewport" content="width=device-width" />
  <title>Precise Diagnostics, Inc.</title>
  <script src="SpryMenuBar.js" type="text/javascript"></script>
  <script src="BrowserDetect.js" type="text/javascript"></script>
  <script src="DrawMain.js" type="text/javascript"></script>
  <link href="SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
  
  <!-- iPhone
  <link href="iphone.css" rel="stylesheet" type="text/css" media="only screen and (max-width:320px)" />
  -->
  
  </head>
  
  <body>
  
  <t1>Laboratory Overview</t1>
      <t2>Precise Diagnostics Laboratory is an independent CLIA certified full-service anatomical pathology laboratory dedicated to provide a diagnostic excellence. Our facility utilizes state-of-the-art   instrumentation and medical technology. Our experienced, board-certified   pathologists strive to meet the highest standards of pathology service.</t2>
      <br />
      <t2>At Precise Diagnostics, Inc. a highly trained team of   laboratory professionals provide fast, accurate, laboratory services in   quest for excellence. </t2>
  <br />
  <t1>Certification &amp; Accreditation</t1>
      <t2>Precise Diagnostics, Inc. is a fully accredited, CLIA certified laboratory with license in New York.</t2>
      <br />
  <t1>Hours of Operation</t1>
      <t2>Laboratory</t2>
          <t3>Monday through Saturday: 10 AM to 8 PM; Sunday: 10 AM to 5 PM</t3>
      <br />
      <t2>Patient Billing Queries (347-861-7571)</t2>
          <t3>Monday through Friday: 9 AM to 4 PM</t3>
  
  </body>
  </html>
  

  And now my .css code snippet:

  t1
  {
      /*font-family: Calibri;*/
      font-weight: bold;
      font-size: 1.2em;    
      display: block;
  }
  
  t2
  {
      /*font-family: Calibri;*/
      font-weight: bold;
      font-size: 0.9em;        
      display: block;
      padding-left: 20px;
  }
  
  t3
  {
      /*font-family: Calibri;*/
      font-weight: normal;
      font-size: 0.8em;        
      display: block;
      padding-left: 40px;
  }
  
  t4
  {
      /*font-family: Calibri;*/
      font-weight: normal;
      font-size: 0.9em;
      display: inline;
      padding-left: 20px;
  }
  
  Body
  {
      font-family: Calibri;
      color: black;
      background-image: url(background-plain-original.jpg);
      background-repeat: repeat-x;
  }
  

  Appearance in firefox:

  

  Appearance in Internet Explorer:

  

  Now, I guess I'm missing something very minor, but I have no idea as to what.  Please PLEASE help me.  Otherwise, I use a workaround solution that takes 4 times the code and inconvenience.  Thanks in advance!

  And, in case of conflict between the rules, an id selector rule slip away a class selector rule.  For example -.

  #s1 {color: red ;}}

  . H2 {color: green ;}}

  ...

  This will be red

• problem with &amp; lt; body &amp; gt; in htmlText using the style sheet

  I have a nec htmlText textField and have the style sheet property set to a style that selects a font, fontSize and color for the < body > tag.
  
  Everything works except the style is not implemented :(
  
  Here is my html text:
  
  < body >
  Prerequisites < br >
  -Tour < br >
  -< Br > diagnostic test
  -How to solve problems < br >
  An OVERVIEW OF THE CALCULATION < br >
  -Historical introduction < br >
  -The uses of 'The Calculus' < br >
  -< Br > shorts
  FUNCTIONS AND MODELS < br >
  -Four ways to represent a function < br >
  -Some essential functions < br >
  -New functions from old functions < br >
  -Exponential functions < br >
  -Reverse functions & logarithms < br >
  -< Br > shorts
  LIMITS AND DERIVATIVES < br >
  -The tangent & speed problems < br >
  -The limit of a function < br >
  -Calculating limits using the limit < br > laws
  -The precise definition of a limit < br >
  -Continuity < br >
  -Limits at infinity; Horizontal asymptotes < br >
  -Derivatives & < br > exchange rate
  -In the drift in function < br >
  -< Br > shorts
  DIFFERENTIATION RULES < br >
  -Polynomials and the exponential < br >
  -The product and Quotient rules < br >
  -< Br / > trigonometric functions
  -The rule of the string < br >
  -Implicit differentiation < br >
  -Logarithmic functions < br >
  -Rate of change < br >
  -Exponential growth and decay < br >
  -Associated rates < br >
  -Linear Approximations and differentials < br >
  -Hyperbolic functions < br >
  -< Br > shorts
  APPLICATIONS OF DIFFERENTIATION < br >
  < / body >
  
  and the code:
  
  

  I was able to skirt the problem by inserting a tag are doing in the HTML file to define the characteristics of the basic fonts. I guess that you can't style atag.

  FlashKitty

• Problems with the removal of the tags

  PES 10 I have a lot of imported key words.  In this list are the tags like USA, Florida, Arizona, Utah, etc.  It is quite easy to drag Utah for a little less USA. I thought that I could then do each State, as a subcategory of the USA.  But when I try this I think that Utah is displayed at the bottom of the list is imported and not less USA as I expected.  What happens OK or not?  I would be able to achieve a tree of tag which if we took it even down another step will be able to see from the USA on the top branch, States like Utah on a branch down & then Salt Lake City on the branch?

  I expect to be able to use the tree of the tag as a way to sort of zoom in. So I would have the options to see all the pictures at the country, State or city level.

  Thanks in advance

  Thanks for the reply.  Because most of my tags were just imported that they were just in alphabetical order.  Some of them are really places & others are really the people or events...

  What I was able to make sense was to create new tags for a State to declare Utah. Then, I select in list of tags imported Utah who already has his tag of Utah.  Then I select all the images of Utah & drag each of them in the new tag in place of Utah.  It means that I have Utah tags on the photos twice (once as any & once as a place).  While images are always selected, then remove the tag imported from Utah.  I then find myself with the correct tags on the photos that are well placed in the tag tree.

• 2910al - 48G Switch: problem with the VLAN

  Hi all,

  I write a new message because I don't know what is happening on my SW series 2910al - 48G and v1910 - 48G.

  I put on the main core SW VLAN 610 and I put to this VLAN IP addreess 100.110.10.1 24-bit etc and it worked fine until yesterday. I change only PLEASE and I enebale STP - loop protect for ports in the range 1-52. (now I rolback this settings as was before)

  

  STP configuration

  

  Now, every PC that has for a long time what IP range 100.110.10.1 24-bit works fine, but new PC have problem with to get the new IP address. I tested it add a static and same address does not work.

  Introduced in second v1910 SW - 48 G VLAN as below

  I connect this flexible switch this \port SW 2910 - G 48, 46 (Vlan 610 tag) <>- at v1910-48G\ port 50 SW (Vlan 610 tahgged) other ports on this switch I put not marked.

  Configuration file for sw v1910 - 48G looks to below:

  #
  activate default domain system
  #
  LLDP enable

  #
  domain system
  disable the access limit
  Active state
  Disable Idle-cut
  self-service-url disable

  #
  rstp STP mode
  enable STP
  #
  NULL0 interface
  #
  GigabitEthernet1/0/1 interface
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1
  #
  interface GigabitEthernet1/0/2
  access port vlan 610
  #
  interface GigabitEthernet1/0/3
  access port vlan 610
  #
  interface GigabitEthernet1/0/4
  access port vlan 610
  #
  interface GigabitEthernet1/0/5
  access port vlan 610
  #
  interface GigabitEthernet1/0/6
  access port vlan 610
  #
  interface GigabitEthernet1/0/7
  access port vlan 610
  #
  interface GigabitEthernet1/0/8
  access port vlan 610
  #
  interface GigabitEthernet1/0/9
  access port vlan 610
  #
  interface GigabitEthernet1/0/10
  access port vlan 610
  #

  #
  interface GigabitEthernet1/0/49
  hybrid type port link
  port hybrid vlan tagged 610 620
  port hybrid vlan 1 10 untagged
  #
  interface GigabitEthernet1/0/50
  hybrid type port link
  port hybrid vlan tagged 610 620
  port hybrid vlan 1 10 untagged
  #
  interface GigabitEthernet1/0/51
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1
  #
  interface GigabitEthernet1/0/52
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1

  etc...

  Could you help me when I made a mistake?

  THX

  The problem was that solve this problem.

  I have blocked all ports. It was a problem. I change several settings and everything works well.

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• 15 K1Y78EA #ABZ ENVI: problem with my wifi Broadcom BCM43142 802.11 Wi - Fi adapter on windows 10 bgn

  Hello
  
  I have a problem with my Broadcom BCM43142 802.11 bgn adapter Wi - Fi because I upgraded my windows 8 to 10

  wifi works fine but then after a while a get on the wifi icon's yellow warning triangle, no internet, reviews
  I have to disable and then enable the adapter to operate again, the same problem, but after a while again accurs

  card driver is updated to the latest version 7.35.275.2, the driver date 02/07/2015 via the HP support assistant

  It says no new updates

  Help, please
  
  Thank you

  Hi @HadjadjTaha,

  Thank you for your inquiry.

  I understand that since the upgrade of Windows 8 for Windows 10 your Wi - Fi works fine, but after awhile the icon won't say no Internet and you will need to disable and re-enable the adapter to regain access to the Internet.

  Would check you this setting.

  • Go to the Device Manager
  • Click the network card to expand the list
  • Right-click on the adapter that is listed and choose Properties
  • Click the power management tab
  • If "allow the computer to turn off this device to save power" is ticked, please remove it.
  • Click OK
  • Repeat the process above listed all types of adapters.

  Here is a link to PC HP - troubleshooting wireless network and Internet (10 windows) that can also help.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• Problem with the file naming

  I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name.

  The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in my cell phone). The old file name keeps showing even though I have already changed the original/source file.
  For example, a song I downloaded bears the title "WTF * Chris Brown-int ' love ' so I changed it to 'Chris Brown - International Love' since that's how I name not all the thousands of my mp3s. But when I added the song to my playlist, the original title is one that appears and not the new. This case is the same with most of my Media Player.
  Is it possible for me to keep my desired/preferred file names when using the Media Player files? It's really so frustrating.

  Usually, media players like WMP does not show the name of the file of the song, but display the title and artist in the song tags (also known as metadata). To change these tags in WMP, add your songs to the library WMP library, right click on the tag you want to edit, and select Edit.

  You can also change the labels of the song with external tools such as Mp3tag.

• Problem with table/table and past data capture

  Hi all

  Newbie is back and I have a problem with my program.

  A brief introduction of what I'm trying to do.

  I'll show you a failure to a system event.

  Based on each event, I will need to connect the error description, the tag, the fault start time and duration.

  All the event information will be displayed on the front table and this table will increase when new event occurred.

  For descriptions and tags - this is fixed based on what fault affects, respectively.

  The issue I'm having is to capture time.

  What I have in mind is to use the time to enter the start time and duration also.

  Departure time is not question because once I press boolean = true, it gives the start time.

  For the duration, when I press boolean = false, it wil give the total duration.

  However, I have a problem as follows:

  (1) to capture what a comprehensive data set (for example / / Desc: fault 1, Tag: one, start time: 2008-12-16 11:15:06 duration: 0 00:00:05) and it passed inside the trap fault Table.

  (2) if the same failure has occurred, it will overwrite the latest information. However, I need to keep the display of old and new events.

  Please notify.

  Opinions and suggestions are welcome mosssssst.

  Million thanks in advance.

  Hi Roziela,

  Thanks for the post and I hope that your well today.

  You must add logic to detect the change of the event (no fault to fault) and produce a Boolean result by 'raising' edge.

  I have a code to do this,

  

  Let me know what you think,