Problem with blackberry.location.longitude and latitude

My widget test first, very basic has a button which, when clicked, should attract the attention of latitude and longitude of the phone, but both values are 0 for some reason any.   I checked on the phone that the GPS works very well and it gives me my lat and long, but I can't seem to get the actual values in my script.  I'm on version 5 of the operating system on a Curve 8900.

Try changing your element to the following:

subdomains of http://Development.sinaesthesia.co.uk"="true"/ >

Tags: BlackBerry Developers

Similar Questions

  • get the longitude and latitude of address

    Hello

    I need to be able to obtain the longitude and the latitude of a place given a text of the address.

    I'd use geocoding Google but, unfortunately their terms of service state that I can't use it unless the information is displayed on their Google maps. Which I will not because I use the built-in Blackberry Maps.

    All I need is the longitude and latitude to calculate the distance between two points.

    I'm looking for a solution which from WebWorks. Y at - it all?

    Solved by using the locator in an extension.

  • Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

    Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

    I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

    Thank you

    Hello

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

    The problem may occur if some of the components of the update are corrupt.

    What is the full error message that you receive?

    I suggest you follow the steps mentioned below to check if the problem is with the update components:

    Method 1: Reset the update components

    See the site:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Run the system update readiness tool

     

    See the site:

    System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Method 3: Turn off the antivirus software

     

    See the site:

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • Problem with 'Blackberry Protect' blackBerry Smartphones

    Hello

    I have a problem with 'Blackberry Protect', I got a message telling me
    "Your mobile pass does not include Blackberry Protect."

    I called my provider and they told me to contact you

    I need your help please

    They are wrong. Your carrier decides what data packages they offer and what is included in their packages. You will need to just talk & text or perhaps 500 MB of data without BBM, etc.. If your monthly subscription does not BlackBerry Protect, you obviously don't have the data package, you need.

    Call them to fix it.

  • BlackBerry Smartphones Cust is having problems with Blackberry App world. BB App...

    Cust is having problems with Blackberry App world. BB App World says it has changed its device pin code too many times (exceeded pin code changes) and leaves him not download applications more

    Hello!

    Your request should be sent as follows. Go to this address:

    and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..).

    If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

    See you soon!

  • Longitude and latitude in a web application to generate a point on a google map

    Hi all

    Is it possible to have a field of longitude and latitude in a web application and then ask them to generate a point on a google map?

    Or I should also have fields to address informed the data of web application to have a point on a google map?

    Thank you!

    I solved the problem. Apparently the States must be entered as two-character abbreviations not the actual value (i.e. CA not California).

    -Jeremy

  • Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

    Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

    That may be a problem with the DDE.

    Try to undo and redo Firefox as default browser.

    Make a different browser like IE browser by default and then let Firefox do it again.

    See:

  • Are there problems with Firefox 5.0 and 1Password 3.6.1?

    I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
    Are there problems with Firefox 5.0 and 1Password 3.6.1?

    They say you need 1Password 3.6.0 or later to work with Firefox 5.0

    http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

    http://help.agilebits.com/1Password3/firefox.html
    
  • Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Kev2012 wrote:

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    It would depend on what you're trying to link to?

    Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

  • Equium L10: Problem with the main battery and battery RTC

    Hello

    I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

    Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

    About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

    The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

    Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

    Concerning

    Brave0

    Hi Brave0,

    The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

    Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

    With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

    Kind regards

  • There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

    There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

    There are no withdrawal, must be replaced and released.

  • problem with the Finder - files and folders displaying incorrectly

    After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

    This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

    Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

    I decided to do a clean install of the operating system but nothing works.

    Is there some setting in Prefs I'm missing?

    Hi there highland99,

    Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

    Thank you for using communities of Apple Support.

  • I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

    I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

    Thank you

    Hi Bob,

    You can consult the following links of wire and check if it helps.

    Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

    With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

    Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Problem with Quicken 2012 House and the company after installation, runtime error

    I have a problem with my Quicken home and business 2012. I upgraded from 2009 to 2012 and was able to use the new version for about 1 hour, but he hung a little.  Now when I tent to access my Quicken program, I get a runtime error "program: C:\Program Files\Quicken\qw.exe ' abnormal program termination. Quicken is then stopped immediately.  I am currently running Windows XP service pack 3.  Any suggestions?

    Hi RENEE HETTERLY,.

    I suggest that you uninstall and reinstall Quicken program on the computer, check to see if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    If the previous step fails, then you will need to contact Quicken support for assistance.

    http://Quicken.Intuit.com/support/Windows.jsp

  • Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

    I recently tried to remove malware on my Vista based laptop Toshiba.


    I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

    I found that the best place to ask this type of question is here: -.

    http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

    There are some very good people out there who helped me (successfully) on 2 occasions.

    Good luck.

    I'll be interested to know how you go.

Maybe you are looking for

  • How to UNINSTALL an add-on already added?

    I have already installed the module "mp3download. I didn't need and not him had failed, but he occupies space in the top search bar box. I want to just uninstall and remove this add-on... Thank you

  • How can I change the appearance of the web site of the TITLE of each search result?

    Hello recently the results of a Google search have changed their appearance.They EMPHASIZE now is each individual "title" of each web site's search result.This makes it very difficult to read the results actually; they run together. How can I change

  • Qosmio G10-133: the blue lines on screen

    To all those who can help you: I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole sy

  • Windows Update error Code: 80072F78. Windows 7 Ultimate 64 bit

    No matter what I try, I always get error code 80072F78.  I am connected via gigabit LAN and I have no problem, surf the web.  I have my temporary disabled anti-virus and Windows Firewall program off the coast (although I tried with it too).  I have a

  • view photos

    can someone help me to post a photo on this site?  I tried to post in the area of the Macro, but I can't make it work.  Help...