Problem with bootcamp partition resized

Similar Questions

• Problem Windows/Bootcamp Partition with unsupported Mac (iMac 21.5 "mid-2011)

  I tried many door routes stealth to install Windows 10 on my iMac (21.5 inch, mid-2011; 1 TB SATA disk), which seems to be not taken in charge by Apple. Whenever I try to use Bootcamp to try to establish a partition, in the end it cuts and force restarts my computer.

  I decided to make my own (150 GB, FAT MS-DOS) partition and a bootable USB stick with all the files .iso on it. The bootable USB key works very well and can get into Boot EFI without problem. The score, according to the EFI boot and Windows Installer, "has a table of MBR partition...". [and] Windows can only be installed on GPT disks. »

  I tried to format the partition to NTFS by using the command-line Windows, such as proposed in the link below, but after downloading the Tuxera NTFS file to move the .iso to the Windows partition image file (I guess to make its own bootable drive) the drive itself is not started.

  In fact, the Windows partition came not in the start screen (hosting option after reboot OR allowing the computer initiate by itself).

  https://www.reddit.com/r/Mac/comments/3rzxd5/guide_windows_10_bootcamp_on_unsupp orted_macs.

  

  After trying to format this partition using the Windows command line, Windows begins to remove it and provides the same error message. After some research, I found that the partitions are hybrid and need for special maintenance. I tried to use gpart, but when trying to convert ONLY TPG, took place the message in a terminal:

  Caveat! Main partition table overlaps the first partition of 32 blocks!

  You need to remove this partition or resize in another utility.

  Caveat! Secondary partition table overlaps the last partition of

  33 blocks!

  You need to remove this partition or resize in another utility.

  I activated the command 'csrutil disable' in Recovery Mode in order to bypass the Protection of the integrity of the system, I found that some users of El Capitan were problems with this.

  I was not able to proceed to the question since this last error and I'm not sure how to proceed, especially because I don't want to lose my data on my Mac hard drive. If anyone knows any information on how I should proceed, please let me know!

  1. you use Boot EFI on a preUEFI computer.

  2. to help TO do a FAT32 partition will also create a hybrid MBR. Please after the release of

  sudo fdisk/dev/disk0

  3. you need not of Tuxera, because Windows install has already the ability to convert FAT to NTFS.

  4. your built-in optical drive works? If so, your W10 ISO burn to a physical DVD and try to follow the standard installation of the BCA.

• Problem with Bootcamp 6.0.2

  Hello everyone

  I have a problem with my MBA. I have a Windows 7 partition with bootcamp assistant, but during the process, I have this problem: "no boot device, press any key to continue"

  I looked on the net, they said stop to reboot but nothing happens. I'm pretty sure that the problem is the computer not my USB (tested on another computer).

  Does anyone have an idea?

  Thanks in advance.

  What year is your MBA?

• Is that a catastrophic problem with BootCamp / virtual machines or something else?

  Just had a catasrophic with BootCamp problem

  My MBP was running a bit lazy, so Apple gave me a few instructions on how to fix this, including linking the installation discs for the disk utility and empty all of my folders cache under OSX.  Don't know if any of this slow and crashing was something to do with the installation of the latest update to OSX

  All of a sudden when I came back to Windows in the usual manner, the installation of windows in the VM required activation. Needless to say I had to activate windows every time I spent Bootcamp in OSX and/or then the merger to get to Windows, I had to re-activate so finally that Microsoft is beginning to think that someone is to install Windows on multiple computers and telephone activation becomes a nightmare.

  But even worse, when I managed to understand what product key that I used for bootcamp and started windows, EACH CONFIGURATION MADE OVER A YEAR or so AND EACH SOFTWARE INSTALLATION HAD DISAPPEARED, I HAD!  Without a windows installation process, I've been frame with a soft-install windows desktop with all my lost favorites. Leading to an even bigger nightmare in the re-installation of hundreds of evidence hours of software.  He had two meager records to show that I was in the right place and that everything is not contained in another folder and a file or two, but I wonder if all these installation information is contained in a cache in the directory structure Active Directory OSX? If so, is it possible to identify the files or the folders in which cache directory must be saved?

  If this is the case, I never dreamed that something to do with the windows installation was contained in the OSX directory structure?  Surely if this is the case, there should be a strong warning on it?   Admittedlythe Windows Setup WAS a bit slow before the "incident", but I doubt that there is something deeply wrong, and in any event I ran just a fully updated Adaware and Spybot so this problem is probably not a virus. (I don't use email merge)

  If this is the case, is - can anyone identify records needing backup before you empty the caches under OSX?  I don't think THAT many here would have been recovered by the take a snapshot could it? (anyway, I could not in windows without this activation)

  FWIW, the only way I can see what is a matter of merger is if by chance you're under Fusion 2.0.0, which had a fatal flaw it would partition Boot Camp Virtual Machine to take a snap, and if you did not start in native mode again you probably will not notice immediately that all changes have been written in a disc rather than the disc file physics itself and then if we deleted the virtual Boot Camp Machine partition a situation such that you described could have similar results.

  Another thing to look at is C:\Program Files in the Windows directory and see if it contains all the applications you have installed once and if she doesn't then it's quite possible that you run Windows from a default registry hive, which of course contains no information on changes since Windows has been installed but you have really not provide adequate details on what you were in fact under the leadership of Apple technology to get where you currently are, so there is not much that I can offer.

• Problem with Bootcamp

  Hello, I have a late 2013 15 "Macbook Pro. Creating a partition using boot camp, the laptop screen went black, but I could see a non-mobile mouse pointer.  Fans on the Macbook Pro started to turn very hard.

  I gave him a few minutes, but nothing did, then I hit the power button.  After the laptop came back upward, I noticed that a partition has been created called "BOOTCAMP".

  I rebooted the laptop, press the "Option" key and Windows 10 setup via USB.  However, after entering my product key (I bought 10 Windows on USB key), I get a message that says something like: "No found images."  To install Windows, I use a custom USB key that I used with BootCamp.  I think I don't need to use the USB that was in the box of Windows 10.

  I don't know what happened here and wanted to know if someone could provide assistance.  Thank you!

  I am not sure, but I think that this happens when the key cannot be validated with microsoft.

  Try to enter the product key and see if you can then install windows 10 and then try to activate later.

• Problems with Bootcamp

  I had some problems with windows, so I decided to do a new install. This is where my trouble started:

  The bootcamp assistant does not display the installation image option, as my mid 2011 has a superdrive iMac internal. But unfortunately this disc can not read more dads since updating to OS X 10.11.2... My only chance was to install windows by using an external drive. But I have also had no success with it. The Bootcamp Assistant worked as usual, but the iMac is restarted, the installation disc could not be founded.

  Is there a solution to this? can I turn my internal Superdrive to activate the image installagen method? is there a way using the external drive for this or is there a solution to my problem with the player great?

  Help, please...

  Please see

  Bootcamp without optical drive

  http://forums.MacRumors.com/showthread.php?p=20584499#post20584499

• problem with moving and resizing windows

  The last time using my my computer windows 7 I can't move the windows. (I use every day because it is mainly for my work/accounting. Just now not a lot of work). Any time, I take the upper edge with my mouse it fills the entire screen. I try again and again same problem finally, that I get it until the next time. When I try to resize anything happens. Then when you use Word, I click on round top of page logo for print or save etc. He left the program.

  I will try the solution proposed here to shoot trouble the mouse too. It's an old Logitech wireless with a docking station.

  Most of the time I use my computer with Vista Ultimate.

  It is clear that double click occurred sometimes when you use the left button of the mouse.
  First of all, in Control Panel / mouse properties trying to adjust the speed of the double click on the tab buttons.  If the problem persists, try a different mouse.   This problem is sometimes a hardware problem with the mouse itself.

• Problem with moving and resizing effect without stopping on the keyframe

  I move and resize a superhero in the cloud (see video), but the superhero continues to go after the last keyframe.  I just don't understand.

  Video display: problem with automation pos-scale - YouTube

  (don't mean to double post but the last message I have on it seems to have disappeared)

  I'm not to my editor at the moment so I can't be too specific, but I don't know that this is because key frames without being linear, they may have a Bezier curve that will make them to overshoot. If you right-click a keyframe, giving you no option?

• Drive external HARD with bootcamp partition, does not start?

  Hi all

  If I'm running into a bit of a problem. I had an older macbook pro (mid - 09), kept just upgraded HARD drive I had before I sold it. On this HARD drive, it has a partition Mac OS 10.8, and a boot camp windows partition 7. Now that I have my new Macbook Pro (mid-12), with an impressive but small SSD, I tried to start the windows partition via external enclosure. Im running in some points once I selected the bootcamp on the HARD drive partition. It tries to open windows, but I get the error "Windows failed to Start. Kind of stuck here, seeing that I won't try to Exchange hard disks for obvious reasons. Y at - there a fix, or any way around it?

  Windows 7 can not boot from an external device. Visit the Microsoft Windows features.

• Not visible after the Bootcamp partition resize

  Hi all

  After resizing my partition hd mac using disk utility in order to increase the size of my bootcamp/windows partition, I am unable to boot in Windows/Bootcamp

  ++

  MacBook-Pro-2: ~ Primitivo$ sudo fdisk e/dev/disk0

  Fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory

  Type 'help' for more information

  Fdisk: 1 >

  Fdisk: 1 > p

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Offset: 0 Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AC 1023 254 63 - 1023 254 63 [409640-1838565560] < unknown ID >

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1838975200-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1840244736-113278976]

  Fdisk: 1 >

  ++

  MacBook-Pro-2: ~ list of the Primitivo$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Mac drive HARD 1 TB 941,3 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.0 GB disk0s4

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Mac HARD disk 1 GB + 941,0 1 TB drive

  Logical volume on disk0s2

  D789D9D9-C7C1-4F1F-A916-E72B41254272

  Unencrypted

  ++

  MacBook-Pro-2: ~ list of Primitivo cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group D0D9540D-A60C-4104-8C87-83590BEA8F6E

  =========================================================

  Name: Mac 1 TB HARD drive

  Status: online

  Dimensions: 941345566720 B (941,3 GB)

  Free space: 18907136 B (18.9 MB)

  |

  +-Physical volume 9CAD8274-BFCA-4BF9-9363-4BD8DFD62BC0

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 941345566720 B (941,3 GB)

  |

  +--> Logical volume family 175BF22B-9105-4ABB-98A9-51919EA14CD5

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume D789D9D9-C7C1-4F1F-A916-E72B41254272

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 940974338048 B (941,0 GB)

  Reversible: Yes (no required decryption)

  Name: Mac 1 TB HARD drive

  Volume name: Mac 1 TB HARD drive

  Content indicator: Apple_HFS

  ++

  MacBook-Pro-2: ~ Primitivo$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1838565560 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1838975200 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1840244736 113278976 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ++

  Any help would be appreciated, thanks

  (mid 2010 MCBOOK PRO 17' 2.53 I5 OS X EL CAPITAN 10.11.3)

  Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

• Problem with recovery partition

  I have HP DV6 6051ea laptop, my problem is when I try to recover my OS (win7 Home Premium) provided that the factory by the recovery partition, it says use created recovery disc. I created them but I really ned to use the partiton to recover OS not Disk.Please help me solve the problem.

  Sorry, I don't have your answer. If you have the recovery partition INTEC and no manor goes to MBR (not yet cleaned), NICU f11 is the option.

  If the f11 also doesn't work, I have a work around but there is no bail if it can work in all cases.

  Use winpe using USB or CD (you can download for free the winpe image of all the online sites such as BartPE. and create disc/USB using image writer). Now start your PC with this application image and launch ghost32 (most of the images online has already, if not download ghost32 utility to use and copy it to USB).

  Once the Ghost is running, disk/partition image. give the location of the source ofrecovery partition) and the partition of the destination in the drive c. which will extract the image of C:

  Good luck!!!

• Problem with recovery Partition(After i got a Virus)

  Hi all

  I use HP Envy 15 laptop with windows 7 Home premium x 64 bit installed. I don't create the recovery discs since I've had this laptop and what happened is that I had a virus on the internet but I have fixed almost all the defects of the system caused by the latter, but the main problem for me, is that it changes all the Player main file name in Virus1232 for example (d:\recovery converted d:\virus1234) and I spent hours on the internet for the names of folders and files right and I got them all but only a single file, not sure. My problem is when I enter the Recovery Manager it detects none my recovery partition (but the virus is not responsible for any deletion of file it just caused some change system) and just to talk I've also corrected the names of folders and files in the c: drive, since they are necessary also.

  

  What are the names of files I got in the D: drive: bootmgr - BT_HP.flg - CSP. DAT - DeployRp.log - HPSF_Rep.txt - language.ini. and let him file name is the one im not sure of: "HP_WSD.dat" (it's a file of size zero).

  The recoverymgrdump.txt just works & "leaving CSBRMgr::GetRPTOOLPartIndex!
  then he said to me:

  "Win32 System Info Code = 3, Message Info = the system does not have the specified path."

  and he also said:

  "CSBRMgr::HpcdFlgIsExistInUP : \WINDOWS\hpdrcu.prc does not exist."

  I don't know if this is normal, but also the deployrp.log gives me this error:

  "The package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab.

  of course there are errors more in both files, but I guess that those who are the most important.

  
  

  So my question is: the attributes of file in the d: drive would be responsible for this error (I changed all the attributes to be hidden and read-only system)

  OR

  If anyone has a solution please tell me what to do.

  Thank you.

  
  

  You are the best to order that a set of recovery disks from HP, doi a full restore using those.

  You can order here recovery media

  http://support.HP.com/us-en/document/c00810334

  .

  Or call HP on the phone to order a set.

  U.S..
  http://welcome.HP.com/country/us/en/contact_us.html

  Everywhere else
  http://welcome.HP.com/country/us/en/wwcontact_us.html

• Problem with the scale/resize the masks

  Win 7 64 bit, CS5.1

  This question relates to the updated scale/resize the layers with masks. I have a layer with a mask that only shows part of the image, so the majority of the mask is black. However, when I resize the layer (with linked mask), Photoshop changes the mask so that areas once black become white, except for the area around the part that has been hidden behind.

  Below are screenshots of the before - after a sample mask.

  Before:

  

  After:

  

  This example shows what happens to the mask using the Image > Image size of dialogue, which I would have assumed would fully respect the layout of the mask, but does not work. I also have the same problem when you use the transform tools. I also tried to change the permission of foreground/background colors to resize, just to see if it has auto-fill of the mask with white, but I saw no effect by changing or reversing the values.

  I am hoping there is a single place or a preference to prevent this behavior and respect for implementing page-fill masks when resizing. I appreciate any assistance.

  This is probably the reason why your seeing this behavior.

  If you add a layer mask > hide all, or invert the layer mask if you are using a layer mask > show all (even just by clicking on the button layer mask), just use Ctrl > I (Image > adjustments > invert) to reverse the layer mask.

  So you probably won't see this issue.

• DV 6-6170 ee problem with recovery partition

  my restore partition does not work when I try to start by F11 shows a partition allocation failed message, I did an extra partiton tool so when the problem of recovery occurred I removed this partition and when I tried to set the partition as active I can't rely on it because it is disabled.

  in the window manager, that it shows that I have 4 partitions C, system recovery, Hp tools is true and how do I reactivate my recovery to work properly, please advice me.

  After you apply the changes - restart the laptop at least once. Then, stop and restart after 1 minute - press F11 to check if the recovery work.

• Problems with the scale / resize the Logo with a 3D effect on Illustrator?

  To anyone who can help:

  I designed a logo for the work, which has a 3D effect. I made sure that the strikes of the scaling and effects has been used before turning the small size of the images. This is the size of the original logo as its meant to look like:

  

  When the logo is reduced, however, its quality is lost and the logo moves shaped. The the black part of the logo Gets the pieces randomly oranges on this and the logo loses quality shrunk in a smaller size. Here what the logo looks like when done resized more small.

  

  How could I solve this problem? Is it because that the logo itself or a setting on Illustrator CC? Any help is appreciated thank you!

  Perhaps another way...

  You can always make a copy of the original (so if you need to change at any time) and then object > Expand...

  Then try it down/up to scale?