Satellite C650-17Z - only PXE error message no boot device

Similar Questions

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• Satellite Pro 4600: PXE error message

  I got a laptop that is not working. I'm trying to re - install XP Pro.
  I changed the boot on cd first order, but it only works intermittently and jumps a lot of files.
  At the moment I have an error message;
  "PXE - E61 media test failure, cable test"
  "Intel DXE ROM PXE - MOF smoothly"

  Followed;
  "Windows was not start because the following file is missing or damaged:
  "root\system32\hal.dll windows".
  "Please re - install a copy of the above file.

  It is one of the many files that have been ignored the last time that the dvd player was working.
  It's a full XP Pro cd.

  Can anyone please tell me if it's the hard drive or dvd player that is at fault, or could the problem lie elsewhere?

  Hello

  The PXE error message usually if the laptop tries to boot from LAN.
  I put t know how you changed the boot order, but the LAN option must be set at the end of the boot order.

  I guess that the following error messages occur because of this setting.
  I recommend you this possibility.

  Good bye

• Satellite C650-17Z - keys FN and Ctrl-Alt-Del does not work

  I recently bought a Satellite C650-17Z and the function key and the Ctrl-Alt-Del key combination ceased to operate. Is there a solution to this all - I got older laptops from Toshiba is a driver issue, but I can't find the drivers for specific keyboard on the Toshiba site.

  Could someone enlighten me, please?

  Hello

  Regards the FN keys will find it many other topics in the forum.
  Did you find them? Is there a solution for you?

  In any case, you must reinstall the package of added value and utility to Support Flash Cards because both controls the FN keys. You can download all the tools on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But for the Al-Ctrl-Del combination, there is no special driver but maybe it can be solved with these tools...

• Satellite L655D-s5050: PXE - MOF: exit Intel PXE ROM. No boot device

  Hello

  I have a laptop Satellite L655D-s5050 running windows.
  When I put the power, instead of get a toshiba logo, I get a black screen with the command prompt and a few seconds later the following messages:

  Intel UNDI, PXE - 2.0 (build 083)
  Copyright (C) 1997-2000 Intel Corporation

  For Atheros PCIE Ethernet Controller v2.0.1.9 (15/12/09)

  Check the connection of the cable!
  PXE - MOF: Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key.

  When I insert a bootable Windows 7 DVD, the installation process runs very slowly and never ends...

  How can I fixed this problem, if you have an idea, please share it with me.

  Thank you

  Hello

  Message PXE is a typical sign of a malfunction of the HARD drive.
  Why? Because the laptop is trying to boot from LAN.
  Why LAN?
  Because other bootable devices have not been found.

  I would recommend so check the first page of the BIOS. If the HARD drive is not listed, this means that the HARD drive is faulty and should be replaced.

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• 3FO error found no boot device

  Original title: Renabling UEFI Mode error

  Last time I reformatted my PC and disable cause UEFI Mode if I turn it off so I can't format my pc!

  [OS before format: windows 8 pro]
  [OS after format windows 8 pro
  Now after formatting, I tried to solve the UEFi, which disables the traditional way
  and I get error 3FO no boot device found!
  my hard drive works fine!

  Hi Eddie,.

  I suppose that you have an HP computer.  Please see this topic for a possible cause of the failure.

  http://h30434.www3.HP.com/T5/notebook-hardware/my-PC-is-saying-boot-device-not-found-hard-disk-3FO/TD-p/778869

  See also: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/quot-Hard-Disk-3F0-BootDevice-not-found-quot-Error-Message/td-p/2443931

  Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  I suggest you contact HP support.
  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• I get the message "No. Boot Device Detected" in Vista

  I changed the battery in Dell Dimension e521 my mother.  Then when booting I get the message "No boot device found". I can continue and boot from the CD.  I tried to Dothe StartRepair bt he indicated there is no problems.  How can I fant6mes the startup problem?

  Hello

  Installation/configuration (BIOS/CMOS) often F2 as you boot then watch the screen - make sure that the hard drive is set
  first of all in the boot order.

  Check with Support from Dell, their online documentation, diagnosis and ask in their forums on any
  known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite A200 starts - PXE error message

  Hello

  I have a Sat A200 woo.
  The problem started when my phone froze when I download something and I turned it off using the power button.
  But now when I turn it on it comes up with this execution environment (pxe) boot before and continues to say that the media are missing and check the cable?

  Can someone tell me how to fix it

  Thank you

  Hello

  You mean this message?

  + PXE - E61: Media test failure, check cable.
  + PXE - M0F: exit Intel Boot Agent. +

  This means that the operating system is not found possibly the HARD drive is dead, or the operating system has not been installed correctly.

  I recommend to check first if the HARD drive is seen in the BIOS. If it isn't then you should replace the HARD drive and should reinstall the operating system.

• Satellite 5200 903: cooling problem error message

  a few minutes after the start of my Satellite 5200 903 (xp home sp1) an error message apears: "problem with the cooling system, shut down your system and send it to the service ' (this is a free translation of the German..) I installed a temperature control tool, the software displays the temperature of the processor about 60 ° C, but I don't hear the fan...
  Can anyone help?

  Hello

  You have a good chance that it is only a cooling module.
  This warning message usually appears because the CPU cooling module can cool the CPU properly or it does not.
  However, the best way is to contact the Toshiba service partner in your country. Ask the guys notice and I am sure that you will get an appropriate response.

  Good luck

• Satellite M500 - Missing TosHdpAPI.dll error message

  I recently installed Quicken 2011 and after installation, an error message appeared when the laptop starts:
  Cannot start the application... Missing ToshdpAPI.dll.

  I'm running Windows 7 Pro on a Satellite M500

  I have here a way to get a new copy of this dll?

  Hello

  I searched a bit using Google and it seems that TosHdpAPI.dll belongs to Toshiba Bluetooth software stack but he s strange why it is important for your Quicken program

  In your case I would try to reinstall the Bluetooth software which can be downloaded here:
  http://APS2.toshiba-tro.de/Bluetooth/

  If it doesn t help you should contact the manufacture of the Quicken program. Usually, they should know how you can get rid of this error message. They probably have a patch (update) for this problem.

• Satellite A30: system32\config\system error message

  Hello

  I have a Satellite A30 and when I start it it displays the system32\config\system error message

  He also says I can try to repair it by starting the original windows using the installation CD installation program.

  Problem is that I don't have any CD or recovery discs that I bought the laptop on ebay 2 years ago

  While the options of do I have that I don't really want to spend the money, put it in repair... the credit crunch and all that!

  Thank you

  Hello

  Hmm I doubt that you can solve this problem without going through any system windows disk or recovery disk.
  It seems that the installed OS is messed up and you last chance would be a new installation of the OS on the MS Windows CD or Toshiba recovery disc.

  Good bye

• Satellite C650 - unable to connect to message

  I have my Satellite C650 connection problems to my home network.

  At least tries to connect to the network I get an unable to connect to the message, if I leave the phone alone for 15 minutes it usually will have connected when I
  Come back.
  I have also 2 other machines which connect without problems, one of them is a Satellite earlier.

  I tried the network troubleshooter who wants that I reset the router, I tried, but it makes no difference.
  I would be grateful if anyone has any ideas.

  Hi ralwat,

  Interesting, but what operating system, do you?

  I put also t know what the problem is exactly, but you should check if there is a newer version of the WLAN driver on the official website of Toshiba. The problem is maybe a problem of driver driver update would be useful:
  http://APS2.toshiba-tro.de/WLAN/

  Check this box!

• Satellite R630 - 11L - BIOS update error message

  R630 - 11L (PT31LE) > driver download page shows new bios update available for this model
  * date * output: 28/09/10
  * version *:B1.60 - EC1.40
  * name *: "bios - 20100928154217.zip--> P007Bv160_EC73V140.exe.
  * FTP - URL *: calleula.asp? ID = 77071

  "After you download the file and run I get *" this computer is not supported "* error message."
  I wonder to know if someone perform to install the update of the bios to this material?

  Thank you.

  Hey Buddy,

  Before you start the update of the BIOS, make sure that all files are checked and logged as administrator. Then close all running programs execution also your AntiVirus and your firewall, then launch the BIOS update.
  Also make sure that the battery is fully charged and AC/DC adapter is plugged in.

  In addition, it would be interesting to know what OS you start the update.
  Not least have last but you installed package of added value?