problem with bsod

Similar Questions

• Problems with BSOD in Win7sp1, x 0124

  Hi all

  I have a problem. I have a Win7SP1 Pro on my pc at home.

  If I have a game running like the shadows of Mordor, then nothing will (normally) not, game pieces, if I leave it alone for an indefinite period of time (99% of the time), all right.

  If I leave the PC alone without game and show the office then after 5 to 15 minutes, the PC will be BSOD with error 0 x 00000124.

  The accident analysis WinDBG is pasted at the end of this way. (I do not know how the symbols work in windbg have not pasted in)

  Can someone point me in the right direction for this please? I have disabled people of the screen saver, the parameters of high power Performance, "Never" set to the value "Off the display" and "put the computer to sleep. 'Disable hard drive' was set at 20 minutes, so I changed it to 180 and see if that makes a difference.

  I use a processor i5-4590, mboard D3H H97M, 8 GB of ram and an AMD Radeon HD 7700 display.

  I didn't update all motherboard drivers yet but will soon. PC works when I use it and never a BSOD when I'm at the keyboard, so I can't believe its heat related.

  Anyone got any ideas please?

  Thank you very much!

  FAULTING_MODULE: fffff80003402000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  BUGCHECK_STR: 0x124_GenuineIntel

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17298 (debuggers (dbg). 141024-1500) amd64fre

  STACK_TEXT:
  fffff800 '03c13a98 fffff800' 039ffa3b: fffffa80 00000000'00000124 00000000'00000000 ' 070b 4028 00000000' bf800000: nt + 0x735c0
  "fffff800 '03c13aa0 00000000' 00000124: 00000000 ' 00000000 fffffa80 ' 070b 4028 00000000' 00000000'00200401 bf800000: hal + 0x12a3b
  fffff800'03c13aa8 00000000' 00000000: fffffa80 '070b 4028 00000000' bf800000 00000000'00200401 fffffa80' 06f37bd0: 0 x 124

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: GenuineIntel

  Nom_image: GenuineIntel

  IMAGE_VERSION:

  BUCKET_ID: WRONG_SYMBOLS

  FAILURE_BUCKET_ID: WRONG_SYMBOLS

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:wrong_symbols

  FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}

  Follow-up: MachineOwner

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, correct in this wiki

• More problems with BSOD? Need help!

  So I already made a thread on the BSOD and thought that I had solved the problem. But, I've got 2 blue screens tonight. One was "IRQL_NOT_LESS_OR_EQUAL" and the fault was of ntoskrnl.exe84d5b and the other ntoskrnl.exef20d4.  I have downloaded on my SkyDrive (https://skydrive.live.com/redir?resid=5051AC31078E096A%21149), mini dump files if someone could read the files and give their opinion on what could be the cause of it, I would really appreciate it.

  I think it might be my motherboard some how, it has been with me all the time that since the BSOD. I changed almost every component.
  Someone suggested that it could be a memory error, but it's unreleased memory, I tried in another machine of friends and there not once BSOD. I bought a new graphics card, thinking that they were the cause of the BSOD but it was very good. I also bought an SSD of 335 Intel, which is quite good in other platforms. Only other thing left for material is motherboard, what could be her.
  Thank you very much.

  Anne

  These related to the nvlddmkm.sys nVidia Display Driver.  There is a known issue with this driver (December 2013).  I would come back to a previous driver (6 months old) at least until they release a new driver with less bugs.

  Also of note, you still have the remnants of Symantec, which is known to be problematic and Kaspersky (also problematic).  If updating the video driver solves the problem I delete both and replace it with MSE.

  Do not forget to disable the Auditor by typing auditor/Reset

• Problems with BSOD

  Hello

  I have a laptop MSI GE70 running Windows 8.
  Recently I started having the blue screen of death quite often. It seems to happen 10 minutes after I boot my laptop.
  I looked for alternatives and found several articles, but nothing seems to help...
  I've updated all the drivers I could find and so on...
  The error code I get with the blue screen is: DRIVER_IRQL_NOT_LESS_OR_EQUAL (e22w8x64.sys)
  Any help is appreciated!
  Thank you!
  kiuru15

  Thank you!

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  Failed to load image \SystemRoot\system32\DRIVERS\e22w8x64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for e22w8x64.sys
  ERROR: Module load completed but symbols can be loaded for e22w8x64.sys
  Probably caused by: e22w8x64.sys ( e22w8x64 + 19f9b )

  ^^ Killer networks Ethernet Card Driver dated Monday, dec 10:42:37 3 2012 (and earlier versions) because of Qualcomm Atheros Killer Service BSOD. If we run a lmvm on your:

  4: kd > lmvm e22w8x64
  start end module name
  fffff880 '05af8000 fffff880' 05b 23000 e22w8x64 T (no symbol)
  Loaded symbol image file: e22w8x64.sys
  Image path: \SystemRoot\system32\DRIVERS\e22w8x64.sys
  Image name: e22w8x64.sys
  Timestamp: kills Jul 10 12:29:50 2012 (4FFC587E)

  Dated July 10, 2012.

  Solution here: http://service.msicomputer.com/msi_user/TechFAQdetail.aspx?formid=3054

  Kind regards

  Patrick

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Having a problem with my computer I try to restart and get BSOD saying internal error Planner video background

  Original title: Blue Screen of Death (BSOD)

  Hello im having a problem with my computer I try to reboot and I get BSOD saying internal error Planner video background

  Here is my mini dump file:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4807 & authkey =! AGKWUp-ndI0XBgE & ithint = the file % 2cdmp

  and here is my system info:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4810 & authkey =! AFloWJarqiE83QM & ithint = the file % 2cnfo

  im hoping that this will let you know what is wrong or not

  RW

  This phenomenon was linked to your video driver (atikmpag.sys) /DirectX.  I would completely remove the current driver and install the latest driver available.

• BSOD problems with a computer of windows 8

  Hello. I've had my computer for over a year now, and since about a week after I got it I had several problems with it. Initially, I had problems with usb devices works sometimes not. In this case I have to restart several times hoping to rework them. Over time, that has become less of a problem, but still exists. Then when I play games on my pc as the League of legends and world of warcraft games themselves would break several times. I also had problems with different programs crashing like Skype, google chrome and also blocks flash in chrome. Soon enough my whole system was crashing with BSOD messages or sometimes would be only to randomly restart or freeze.

  Here is a list of the different BSOD:

  irql not less or equal, page fault in nonpaged area, kmode exception not handled, pool header corruption of infrastructure critical bad memory management

  Unexpected kernel mode trap and driver irql not less or equivalent. With several different drivers be blamed.

  Now its to the point where I'll watch a live stream on twitch.tv or a video on youtube and it will crash after a few minutes. It happens more often in these situations, or in game, but it can also happen randomly even if soon as just start or idle.

  I tried many different things to update many pilots to replace my ram and hard drive as well as full reinstalls of windows and system different restore points. I wanted to ask you on this forum about it to see if it has what I can do to solve this problem before I send in for repair because I prefer not to be without him for an extended period of time.

  Thank you for hearing me.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  Co-written by JMH3143

  .

  You have an older driver that needs to be updated. Associated with MBfilt64.sys Audio driver of Creative Technology Ltd.

  You must also upgrade to win 8.1 at least.

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Satellite A300D-17F - problem with upgrading RAM

  Hi all.

  First sorry for my bad English. So the problem is my laptop has 4GB (2x2gb). I buy 1x4Go and I want to run with 6 GB. When I install my laptop (1x2Go/1x4Go) run in the bios write 6144 mb.

  But wen the bsod from windows... beginning some time the gel on the Welcome to windows and bsod screen.
  I tried evrerything run with 6 GB no success (once and show me the material 802 MB reserved after the next reboot bsod).

  Some time is running in Mode safe and write some use ram with linux Hardware Reserved.Under I have not problems: installed X 6 GB and no problem. A friend tells me that my shared video memory card to do conflict and cannot calculate the ram. Can I DISABLE my shared video card memory.

  The video card is not integrated.
  I'll give you all the information you will need...: «(want to just run this computer with 6 GB of ram... and no bsod...»

  I have test the ram. (NEW Corsair 1x4Go RAM) Memtest
  Don't test everything no problems with the hardware.
  Reinstall the windows (x 64) only.
  Stop the SuperFetch service.
  Install windows patches.
  I don't know what I'm doing more: "(.)"
  If can do disable the video memory?

  * Toshiba A300D-PSAKCE *.

  * ATI HD3650 512 MB *-http://imageshack.us/f/593/adaptermemory.png/

  DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) - and 2 Rams have the same calendar...

  * BIOS WITH 6 GB *-http://imageshack.us/photo/my-images/37/sdc12878y.jpg/

  * PHOENIX BIOS v3.30* - http://www.mediafire.com/?7ashzkqkk94v9ll

  * SOME OF BSOD HERE * - after windows logo or on the windows logo - http://imageshack.us/photo/my-images/43/sdc12873a.jpg/ / http://imageshack.us/photo/my-images/822/sdc12872v.jpg/ http://imageshack.us/photo/my-images/860/sdc12877.jpg/

  I thing if I disable the shared video (hypermemory) will fix the problem but how to disable? Have all of the options for this in the bios.

  Nice story, but the question is: you use the memory modules live compatible?
  In your long announce didn t post part number and manufacturer of your Ram for upgrade.

  Is that compatible RAMs will work perfectly and there is nothing you have to change, especially not some options of memory sharing that don t even exist.

  By the way:
  4 GB of RAM compatible have part number PA3670U-1M4G. Use this RAM and you won't have any problems, especially BSOD. BSOD is clear evidence that there is compatibility problem.

• After the last update of BIOS that Satellite P100 locks with BSOD

  Hello

  Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

  I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

  Microsoft advised me to reduce the video acceleration for video adjustment.
  Maybe can someone explain to me why I have this problem?
  I use the same drivers and software same as in the second update
  I can find BIOS previous to rewrite again, because this one works very well with my laptop?

  Thank you!

  Hi Sebasian

  I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

  As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

  If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.

• Problems with RIS, Portege R100 and, possibly, XP SP2

  Hello

  I have a problem with RIS on my Portege R100, when I try to install Windows XP SP2. I have a problem where he complained that I never had a the network driver needed to use RIS, a quick search in the Intel Web site services showed that there was a new. INF file that should be placed in the folder i386 to enable RIS th work. When I start now in PXE/RIS I move forward, but only a little.

  He seems to have all the necessary files until it says: 'the installation program starts Windows', and then display the BSOD.

  It's very frustrating because I have a number of laptops to build.

  If you need more information do not hesitate to ask.

  Martin

  Hello Martin

  If I understand you just talk about installation service remotely. The problem is that Toshiba supports only the OS. BACK is not supported, but you should try to fix this problem yourself. I'm sure that he can somehow work.

  Good luck!

• Problems with Benq DC C 700 digital camera on the Satellite L30 105

  Hello

  I have problems with my digital camera when I connect it to my laptop. Whenever I connect the camera to the laptop freezes and gives me the blue screen of death, in other words, the screen you get when a fatal error occurs, and then my laptop must be restarted. If this happens whenever I connect the two.

  I tried the bios update and install the latest orders, but nothing seemed to work. I contacted the support center in Benq and they told me to contact Toshiba as they are sure that the problem is not with the camera. So please someone, if you have any ideas or suggestions or solutions, I'll be happy to hear.

  Thank you!

  Hello

  First of all if you need Toshiba support, you will need to contact Toshiba authorized service partner in your country. This forum here is only a forum for users and you won't find anyone from Toshiba here.

  On the other hand;
  It seems that the Satellite L30-105 has been bundled with Vista. Using this operating system on the L30?
  I read on many problems with the 3rd devices, software, and Windows Vista.

  I put t know what said you, but eventually the software webcam is not 100% compatible with Vista.
  You should know that the BSOD appears if there is a serious hardware problem or software. I don t think that this problem was caused by a hardware issue and so there is only one possibility; software compatibility issues.

  In case you I would update the Vista of the State and I will ask manufacturing webcam if it s 100% compatible with Vista.

  Good luck

• Satellite A60 crashes with BSOD using the WLan connection

  Hello

  The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event viewer report) with but it is often talking about Toshiba phone services but no solution.

  Tried two (netgear) pcmcia & usb (agere) wifi cards - exactly same problem can not maps.

  In desperation re-formatted & resettled Xp & all drivers Toshiba of original Cd of Tosh, then Xp Sp2 & then all the updates/fixes engineering including the bios from site Web of Tosh. Still crashes.

  If the software has - v installed or not makes no difference.

  A 512 extra ram on top of 256 original.

  Any ideas?

  Please believe me that it is not easy to say why the BSOD appears!
  From my personal experience, that the BSOD can occurs because of the problem of critical software, or because of the problem of equipment.

  In your case, it looks like a hardware problem (this is my personal opinion)
  Generally, the laptop should work with the external WLan USB card. I put t see no reason why it shouldn't work t.

  You said that you have updated the RAM on this laptop, I noticed on many laptops than similar issues after a RAM upgrade.

  For example; I inserted the new 1 GB RAM on my old Satellite and received a BSOD. I used a compatible but the BSOD appeared sometimes.
  After the passage of the modules to another location memory my laptop works properly!

  Please check this box. Maybe you could check if the same thing happens with your old module!

  Good luck

• PROBLEM WITH NETBOOK! Help, please

  Hello guys,.

  I'm having a serious problem with my HP mini 210 netbook 1028TU.
  
  I formatted my hard drive to create two different partitions, about a month ago and installed Windows 8 Preview Release from the Microsoft Site
  After 2 weeks of use, once Windows defender detected and quarantined 4 Trojan virus. When I saw that I tried to remove them, while eliminating the netbook suddenly stopped without any BSOD or a message.
  
  I tried to restart, but now it just won't start, nothing happened since the beginning of the start screen. So I did a USB bootable windows7 to reformat the hard drive and do a clean install of windos7 Starter as it was over early. It went well and I deleted the partitions and developments and begin the installation. During Installation when it reaches 35%, he stopped and showed windows cannot be installed. I tried again, but now he hung up while he was showing "the installation program starts.
  
  Now when I start my PC it shows: -.
  
  Your PC needs to be repaired
  and an unexpected error has occurred.

  Error code: 0xc0000034

  In addition, I ran test drive by the bios and it stuck and showed "Replace hard disk 1" in RED
  
  Please guys help me I really need for my netbook

  Fix.

  Removing and reinstalling the drive is a troubleshooting step to determine if your hard disk is damaged.

  Do that first.

  If no joy, then the hard drive will be replaced by a new to make you a netbook to a usable state.

• Problems with the last update of Windows - XP

  My office has recently installed a few days ago most recent Windows automatic updates. I have never had any problem with them until once they have been installed. Now, I am constantly the dreaded BSoD, and my computer not acting is not right. My tv tuner gel to my computer disconnected from the internet after a while to even my mouse not acting pointer is not right (he is not above windows, sometimes only behind them). The Blue Screen of Death appears for a split second, so I have absolutely no time to see what he says.

  The error report contains the following:
  C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\Mini112609-01.dmp
  C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\sysdata. XML

  The error signature:
  BCCode: 1000008e BCP1: C0000005 BCP2: 004D004E BCP3: 9EBD4B70
  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  When I look into the details, he said something about a device driver. But that doesn't help really since everything he ever said whenever I get a "serious mistake." I've done many analyses of virus/malware/spyware (even with the different products as well) and they all find nothing. Which brings me to the conclusion that the most recent updated Windows (23 or 24 November) is what caused my office these problems.

  If someone could help please shed some light on this problem it would be greatly appreciated.

  Edit: I also noticed that when my computer disconnects from the internet, I have to restart in order to regain access to the network. But when I try to restart, it refused to stop and freezes just my background image. I also have a laptop with XP Professional SP3 on it and I have absolutely no problem with him. It is only limited to my office.

  Legrand, I had the same problem and it was driving me crazy too. I tried everything and finally understood the November 25 or 26 update messed up my AVG anti-virus. I deleted via the control panel and did not have a freeze since! I hope you are using AVG, cause if you are, it's probably your answer too. I'll check back here soon to see if this helped you.