Satellite A60 crashes with BSOD using the WLan connection

Similar Questions

• Satellite L755 - problem Audio/video using the WLAN connection

  Hello

  Recently got a Toshiba L755 and have a problem with the playback audio & video since I got it.
  I've updated the latest drivers for the Conexant HD Audio card and it made no difference.

  Essentially during playback there are a sound intermittent distorted during playback mp3, video playback and online stream.

  I tried different programs and the same thing, however, when I have a LAN cable presents no problem - it's only when I'm connected to the wireless network.
  I have a netgear router which works fine.

  Can someone please tell me what might cause the wireless create this problem and how to fix?

  Thank you very much
  Alex

  Strange you noticed this in battery mode and mode of AC adapter as well?
  Maybe a few Wlan signal interference can cause this

• Satellite L350D-213 - how to use the WLAN?

  My mother & father has bought a laptop last week and are having problems with the connection to the sky broadband. Sky Broadband is a netgear router, which has wireless capability.

  My question is how does broadband on your laptop? They need to get a wireless dongle to use, my experience with laptops is minimal.

  Any help much appreciated.

  Hey Buddy,

  I think you should read the user manual. There you can find all the necessary information using the laptop.

  To use the WLAN functionality, you must enable this feature using the WLAN hardware switch on the laptop and the FN + F8 key combination. Check it!

  If the WIFI is enabled, check the configuration of TCP/IP. It s according to your router if you use DHCP or a static IP address.
  In addition you must disable management feature in the management of WLAN power supply.

• Satellite L40 crashes when you use the product recovery disc

  When you use the product recovery disc to repair my laptop it hang after language page display.

  Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

  Some may help how to solve the problem.
  Thank you

  > Select sense when it displays the language, I select language and press next, no action more far there

  Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite A350 is no longer able to use the WLan

  Hello guys,.

  so... I started using Bluetooth earlier, use of the Internet via a cable... Today I tried to use my WLan again, but it did not work (worked well before).
  So I tried to activate it via FN + F8, but all I can see is activate Bluetooth, one for the WLan disappeared?
  The WiFi light only blinks when Bluetooth is activated. I would rather turn off Bluetooth that not being able to use the WLan.

  I think it's a similar problem
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67514&TSTART=0
  but I really didn't want to install a bad driver or anything like that.

  I use a 32-bit Vista and my PC-Tool says that I use these networks currently (I just copy and pasted because honestly, I have no idea, hahaha).
  Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) Version = 6.208.729.2008 MAC address = 00:23:5 A: 05:61:05
  Intel(r) WiFi Link 5100 AGN Version = 12.2.0.11 MAC address = 00:21:5 D: 62:D8:1 C

  I would be so happy if someone could help me fix the problem anytime soon, because I really need wireless capability soon. Thanks :)

  Former Satellite A350 was delivered origin with Vista OS, so at first I would like to know if you use original recovery image (OS) that you got with your laptop.
  If I understand you good WLAN card is installed and registered properly in Device Manager. Can you confirm this?

  I have Satellite A300 and a friend of my A350 but WLAn works properly on both machines so I m a bit confused why the WLAN option is missing when you use the FN + F8 key combination.
  I m wondering why WLAN is detected by the system but ignored by the utility of flash cards.

  I'm don't know if this will help, but try to follow:
  Enter the BIOS and set it to default settings
  Reseat the wireless network card.
  Reinstall the extra value package, and check again.

  If the problem persists after doing all this, you have to do a final check and reinstall the OS using original recovery image that you got with your laptop. It's a way more radical, but certainly more efficient to solve a software problem.

• Satellite P10-133: I want to use the WLAN

  Hello

  What should I do when I want to use the WLAN with the satellite P10 133?

  Thanx

  Hello

  First that you check if your laptop has been equipped by the wireless network adapter.
  If this isn't the case, then you need to update.
  The easiest way would be a use of the WLan USB key.

  Check your WLan router level. There are different WiFi standards such as 802.11 A, B, G and N
  If your WLan router supports 802.11 B and G, then you should buy and stick that would support both standards too!

  Then configure the WiFi network (especially it s described in the installation instructions provided with WLan stick) and the WLan router.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• dv6t 7000 image crash with BSOD when coming out of sleep

  My power settings are set to put the laptop to sleep when I close the lid.  As soon as I open the cover, things are fine until I have slide the fingerprint reader.  Laptop fails with BSOD and the only way out is to maintain the power button forcing a hard stop.  I turned off hybrid sleep.  I've turned off the options in management of State of PCI Express - Link Power and also two options in settings USB selective suspend settings USB who discovered reading this forum.  Now, I'm afraid to have this machine in standby mode.  Nothing is ever good happens next.  Help.

  Hi DennyC,

  I will do my best to help you with your problem of hibernation mode. Could you please follow the steps described in this document for using sleep or Hibernation .

  Let me know if this helped.

  Thank you

• Photoshop crashes when I use the blur tool

  Photoshop crashes when I use the blur tool. I have Photoshop CS6 64-bit with Windows 7.

  Here are the accident report:

  The failing application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045

  Name of the failed module: MMXCore.8BX, version: 13.0.0.0, time stamp: 0x4f61b92e

  Exception code: 0xc0000005.

  If anyone has an idea on how to solve this problem, I'd be really grateful the help!

  You may be interested in this thread

  Blur brush photoshop CS6 crashes

  Seems to be a known issue with the CS6.

  Terri

• Illustrator CC 2015 constantly crashes when I use the Mop brush.

  Hello. I just started experimenting Illustrator CC 2015 and it constantly crashes when I use the brush palette of tips of brush Mop after a single gesture.

  I tried the same illustration with CS6 and it works fine. Everyone I have a problem, is there a workaround solution and are there seeds more with Illustrator CC?

  IMac 27 "2014 4 GHz retina

  Thanks in advance

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering