Problem with cable support announced for Germany, are the cables carrying Austrian also affected?

I read about a problem on older charge cable which are sold until 2015. In some cases electrical discharges can occur and I wanted to ask the Austrian weather products are also affected.

It seems very likely.

Here are instructions from Apple on the reminder.

https://www.Apple.com/UK/support/usbadapter-European/

Tags: Notebooks

Similar Questions

Problem with copy paste function (for images) using the TinyMCE editor

Can not copy paste images (a document - text Copies OK) to the tinyMCE editor in Windows 8. Seems to be the specific question of operating system.

Use the tinyMCE editor for info on the download Web site. Copy-paste function works very well on a Windows7 machine

Hi Anand,

I would be grateful if you can help me with the following information related to the TinyMCE editor:
1. What is the Web browser that you use to copy and paste images via the application editor TinyMCE?
2. What exactly happens when you try to copy and paste images using the editor? You receive an error message?
This problem may occur because of the compatibility of the browser with the TinyMCE editor.

Check out these links and check if the suggestions help you to solve the problem:

http://www.TinyMCE.com/forum/viewtopic.php?PID=34916

http://www.TinyMCE.com/develop/bugtracker_view.php?id=6075

If the problem is specific to the TinyMCE editor, you can also contact the support of TinyMCE:

http://www.TinyMCE.com/enterprise/support.php

Please let us know if you need more help on this issue. Otherwise, feel free to ask for more queries on Windows.

Problem with "select * from table" for dynamic IN the list

I have a 'for loop' based a query that does not work. The query is supposed to return the name of the table, the data type and the name of the column in the columns poses a number of name filters. The problem I have is when I run the query into a TOAD with:

schema_list value SCOTT, MED and the clause of 'in' as ' to (select * from table (DATAPUMP_UTIL.in_list_varchar2 (:schema_list))))»

The query returns the expected lines.

When I have it in my code as shown below it returns no rows. I don't know what hurts me, but any help would be great! I'm on Oracle 11.1.0.6.0.

PROCEDURE export_schema_ondemand (schema_list VARCHAR2, encrypt_file NUMBER default 0, mask_sensitive_data NUMBER default 0) IS  
    ...
    schema_list_t := my_package.in_list_varchar2(schema_list);
    ... 
    for c1 in
       (
        with ok_to_mask as (
        select 
            owner,
            table_name, 
            column_name
        from   
           all_tab_columns
        where
            owner in (select * from table(schema_list_t))
        minus
        (SELECT 
            c.owner,
            p.table_name,
            cc.column_name
        FROM 
            all_cons_columns cc, 
            all_constraints p,
            all_constraints c
        WHERE 
            c.owner in (select * from table(schema_list_t))
            c.constraint_type = 'R'
            AND p.owner = c.r_owner
            AND p.constraint_name = c.r_constraint_name
            AND cc.owner = c.owner
            AND cc.constraint_name = c.constraint_name
            AND cc.table_name = c.table_name
        UNION ALL
        SELECT 
            c.owner,
            cc.table_name,
            cc.column_name
        FROM 
            all_cons_columns cc,
            all_constraints p,
            all_constraints c
        WHERE
            p.owner in (select * from table(schema_list_t))
            AND p.constraint_type in ('P','U')
            AND c.r_owner = p.owner
            AND c.r_constraint_name = p.constraint_name
            AND c.constraint_type = 'R'
            AND cc.owner = c.owner
            AND cc.constraint_name = c.constraint_name
            AND cc.table_name = c.table_name))
        select 
            atc.table_name as mask_tab, 
            atc.column_name as mask_col, 
            atc.data_type as mask_type
        from   
            all_tab_columns atc,
            ok_to_mask otm
        where
            atc.owner = otm.owner
            and atc.table_name = otm.table_name
            and atc.column_name = otm.column_name
            and atc.owner in (select * from table(schema_list_t))
            and 
            (
            atc.column_name like '%LAST%NAME%'
            or atc.column_name like '%FIRST%NAME%'
            or atc.column_name like '%NAME_LAST%'
            or  atc.column_name like '%NAME_FIRST%'
            or  atc.column_name like '%ENAME%'
            or atc.column_name like '%SSN%'
            or atc.column_name like '%DOB%'
            or atc.column_name like '%BIRTH%'
            )
            and atc.column_name not like '%PHYSICIAN_%'
            and atc.column_name not like '%DR_%'
            and atc.column_name not like '%PROVIDER_%'
            and atc.column_name not like 'PRESCRIBER_%'     
       )
      loop
         ...

FUNCTION in_list_varchar2 (p_in_list  IN  VARCHAR2)  RETURN VARCHAR2_TT is

    l_tab   VARCHAR2_TT := VARCHAR2_TT();
    l_text  VARCHAR2(32767) := p_in_list || ',';
    l_idx   NUMBER;
        
BEGIN
    LOOP l_idx := INSTR(l_text, ',');
        EXIT WHEN NVL(l_idx, 0) = 0;
        l_tab.extend;
        l_tab(l_tab.last) := TRIM(SUBSTR(l_text, 1, l_idx - 1));
        l_text := SUBSTR(l_text, l_idx + 1);
    END LOOP;

    RETURN l_tab;
        
END in_list_varchar2;

Published by: BluShadow on June 29, 2011 16:11
addition of {noformat}

{noformat} tags.  PLEASE READ {message:id=9360002} TO LEARN TO DO THIS YOURSELF.

Hello

If you have a query that works well when you launch it directly, and that breaks down when you start with a procedure, this can be a problem of privileges.

Points of view ALL_ * shows only the objects you have access, but using a procedure, privileges must be granted directly to the user and not with a role.

You should check the SELECT privileges to your user through roles and give them directly to the user.

Hope this will help.

Sylvie

I have a problem with corruption. How can I change the timeline on an existing project. Each image is moved about 2.5 min.; My preferences are for 180 frames. It does not seem to consider one after the fact. Is it possible to copy the entire thing on

I am new to use the forums. How to start a discussion? The ICO next which is grayed out.
I have a problem with corruption. How can I change the timeline on an existing project. Each image is moved about 2.5 min.; My preferences are for 180 frames. It does not seem to consider one after the fact. Is it possible to copy the whole thing and put it in a new, m not corrupted project?

Hello and welcome.

I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

Could you please explain the problem so that we can understand?

I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

Hi dude, on average

A. from when what happens?

B. recent changes made on your computer?

C. you get any error message?

First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

Type the following command and press ENTER: sfc/scannow

The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833

Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Problems with clicking and scrolling when you are using the mouse in IE

Separated from this thread.

Original title:

Problems with clicking and scrolling when you are using the mouse

I have the same problem. My touchscreen responds but my touchpad and mouse are unable to save a click in IE. I need to reboot to rectify. It seems to be more common when the laptop comes out of fashion 'sleep'. I tried all the steps above, everything is up-to-date.

Hello Fred,.

Thanks for the reply.

I appreciate your efforts to resolve the issue.

I would suggest trying the following methods and check if it helps.

Method 1:
Run the hardware and devices Troubleshooter and check. Please follow these steps:

a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
b. click on 'show all' and then click 'hardware and devices'.
c. click 'Next' and then follow the on-screen instructions.

If this does not help, then use method 2.

Method 2:
Start your computer in safe mode and check the number.
Refer to this article:
Start settings for Windows (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

I hope this information helps.

Please let us know if you need more help.

Thank you

I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

Don't forget to stay signed with your Adobe ID before accessing the link below

Creative cloud support (all creative cloud customer service problems)

http://helpx.Adobe.com/x-productkb/global/service-CCM.html

problem with my laptop asking for the administrator password or power on password

I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

Hello

Try to enter: 40585508

Kind regards

DP - K

Cisco VPN problem with security update KB3057839 for Vista

Someone had problems with any connection Cisco VPN works after the installation of update of security KB3057839 for Vista? When this update is installed, the pop-up to enter the password and user id not come, need to use the Task Manager to close the program. The first time I went back to the restore point to get my VPN to work, this time I tried to reinstall the VPN but that doesn't work anymore. I started to uninstall updates (had 7 of them), when I got to it, KB3057839, the VPN began working again.

Mike

See this on the real issue:

http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/wishlist/Vista-update-breaks-config.html

It turns out that the logon dialog box is invisible, but still, it agrees to enter you your password and LOG you!

Problems with deployment of GPOs for the Flash player 10,2,159,1 msi

Hi all
I had problems getting 10,2,159,1 msi to deploy via GPO I did all the other versions until this one, which worked well.
When you add the MSI file to the existing GPO the following error on the server appers "no package in the installation of software in the Active Directory data does meet this criterion.
This adds the msi to the Group Policy object, but it will not install.
I tried runing the MSI manually but when installing, msi errors out and don't fail to install flash.
Server 2008r2 deployment machines XP SP3 and win 7 pro.
Deploy only IE active x file being used 'install_flash_player_10_active_x.msi '.
Anyone else having this problem?
Thank you very much
Richard

Sorry for the delay, it was ultimately a problem with our communication server not correctly when the Group Policy object creation took place.

Also, after the new version of Flash in this version, it's the previous version that caused this error.

You must run restart flash removal tool, run flash removal too new and then install the new version of flash by either EXE or MSI.

AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

Bill,

The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

If possible / there is, you must record a current work first, of course.

(1) close Illy and open again.

(2) restart the computer (you can make up at least 5 times);

(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

Even worse, you can:

(6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

http://www.Adobe.com/support/contact/cscleanertool.html

I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

original title: Internet connectivity problem

Hello

Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

Support link: http://www.pandasecurity.com/homeusers/support/

OEM Apple nVidia GeForce 7300 GT is on the list of Adobe to not support GPU for rendering of the Open GL...

My Mac Pro Radeon X 1900 XT is retired to my yard serious computer in my basement, but that goes back to the OEM Apple nVidia GeForce 7300 GT, brought encouraging results delivered with my Mac Pro.
When I got the Mac Pro 2007, in 2009, I was running it in Mac OS 10.4.4.11 Tiger and Photoshop CS4 (11.0.0) would turn off the Open GL rendering when it detected the GeForce 7300 GT card stock, which was on the list of unsupported graphics nVidia GPU Adobe. So, I bought a refurbished nine Apple Radeon X 1900 XT. This card allowed to Photoshop CS4 and Bridge CS4 allow Open GL rendering. Last year, the Radeon X 1900 XT graphics card created scratches on my screen when it is running hot and sometimes dual turns off just as I was working. In addition, the computer was material freezes about once a day. This morning the Mac Pro close its dual display, while I was working, and I had to make another cold cut in order to restart. I then manually shut down the computer and doing a manual start so that Snow Leopard would use disk maintenance.
I turned off the computer and pulled the Radeon X 1900 XT card and re-inserted the OEM Apple nVidia GeForce 7300 GT card. Now I'm in Mac OS 10.6.8 Snow Leopard with Photoshop CS4 (11.0.2) instead of Photoshop CS4 (11.0.0).
Now, the update to Photoshop CS4, under the most recent operating system, allowing rendering Open GL instead of disable. Physical limitation of this graphics card is now fixed, so I see no reason to buy the ATI Radeon HD 5770 Graphics Upgrade Kit for my Mac Pro:
http://eShop.MacSales.com/item/Apple/6615718/
Some of those who bought the Apple ATI Radeon HD 5770 will say that they always got the striping on their screen when the Radeon HD 5770 card was running hot, just like with the Radeon X 1900 XT.
So far, Apple OEM nVidia GeForce 7300 GT works fine and I get no striping on my poster without shut-off or material display freezes.
I'm happy to have made of Open GL to Adobe enabled with an OEM GPU graphic that works cool and requires no fan cooling anchored. Apple OEM nVidia GeForce 7300 GT, for the Mac Pro, is on the list of Adobe to not support GPU for rendering of the Open GL under Photoshop CS4, so why is he now supported? That is just one of the benefits of the Photoshop CS4 11.0.2 update?

Also FYI, Adobe is not always announce or specify bug fixes in versions of update of an application, although sometimes they do.

I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

TIA,
BWSwede

Try to create a new profile.

See "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.
- http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
- https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
What problems do you have that you want to reset Firefox?

Firefox creates a new folder of old data of Firefox on the desktop?

If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

Problem with PL/Sql to insert Images in the table

Hi, im using SQL Developer Version 3.2.20.09,
I want to create a table with a column of type BLOB for the insertion of image files. So I created the table, the directory, and the procedure I described below. And in the C:\ drive I created a new folder named image_dir that contains a file named test_image with extension .jpeg.
Here are the steps I took:
create the directory image_dir as 'c:\image_dir ';
CREATE TABLE test_image
(IDENTIFICATION NUMBER,
Image_filename VARCHAR2 (50).
image BLOB
);
CREATE OR REPLACE PROCEDURE insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)
IS
src_file BFILE.
dst_file BLOB;
lgh_file directory.
BEGIN
src_file: = BFILENAME ("image_dir", p_image_name);
INSERT INTO test_image
(ID, image_filename, image
)
VALUES (p_id, p_image_name, EMPTY_BLOB)
)
RETURN to image
IN dst_file;
CHOOSE the image
IN dst_file
OF test_image
WHERE ID = p_id AND image_filename = p_image_name
UPDATE;
DBMS_LOB. FileOpen (src_file, DBMS_LOB.file_readonly);
lgh_file: = DBMS_LOB.getlength (src_file);
DBMS_LOB. LoadFromFile (dst_file, src_file, lgh_file);
UPDATE test_image
SET image = dst_file
WHERE ID = p_id AND image_filename = p_image_name;
DBMS_LOB. FileClose (src_file);
END insert_image_file;
But I still have this error when I run the command EXECUTE insert_image_file (1, "test_image.jpg"); Please what could be the reason for this and a better solution?
Error from the 1 in the command line:
RUN insert_image_file (1, "test_image.jpg")
Error report:
ORA-22285: non-existent directory or file for FILEOPEN operation
ORA-06512: at "SYS." DBMS_LOB", line 744
ORA-06512: at "ANSUWEB. INSERT_IMAGE_FILE', line 20
ORA-06512: at line 1
1. 00000 - 'non-existent directory or file %s operation '.
* Cause: Attempted access to a directory that does not exist, or attempted
to access a file in a directory that does not exist.
* Action: To ensure that an appropriate system specified
the directory exists in the data dictionary, or
Make sure that the name is correct.

A guess: c:\image_dir is not on the server where Oracle is looking for it

Concerning

Etbin

Problem with cable support announced for Germany, are the cables carrying Austrian also affected?

Similar Questions

Maybe you are looking for