Problem with CLI 5.2.0 Android build

Similar Questions

• Problem with connect Ethernet camera or vision Builder

  Hello world!

  I have Airlive POE-100CAM. It is possible to connect the camera with NIVB?

  I want to receive the image with this cam and inspect in NEITHER.

  I connect the camera to the other computer from my site, but NEITHER Don t see cam.

  Where is the problem?

  Thanks for your advice and sorry for my bad English.

  Frit

  This device is not compatible with IMAQdx. Camera IP (network security cameras) support is currently limited to mark Axis and Basler cameras.

  Eric

• Problem with in-app purchases on Android

  Hello!

  I'm testing in-app purchase as a user test on the Android device. After the payment is done a download process should be launched. But instead, I get the message "unable to validate the receipt. Try again later "."

  To view my payment account, I downloaded a DPS magazine and bought a real problem. No problem. So my payment account is checked.

  Please, any advice what happens?

  

  Please make sure you have the configuration of your shared properly Secret.  You can specify the key Secret/Public shared using the Administration tool of the accounts on the dashboard of DPS.  Please see this forum post for more information could not verify purchase

• Having a problem with my Samsung Galaxy S4 Android Tablet

  I just found out that a few programs I've tried to load requires Adobe Flash Player...  After trying to load Adobe, I received a message which reads:

  Adobe Flash Player is not supported by your device?

  Is that what I can do about it?  Is there another program I can load which is similar to Adobe Flash?

  Help, please...

  Rita

  Google is your friend

  https://helpx.Adobe.com/Flash-Player/KB/installing-Flash-Player-Android-devices.html

• Problem with the construction of a distribution (build stuck at \temp\template.ini)

  I am trying to build a distribution. I installed in my laptop and a PC of LabWindows/CVI lab. The distribution is built using the PC lab. The construction process is rather blocked at \temp\template.ini when I try to use my laptop. The only way to put an end to the construction then is to kill the process via the Task Manager (even the version 'Cancel' gets stuck then and I have to kill him via the Task Manager).

  In computers, I have 9.0 LabWindows and they both generate generation log attached.

  When I check the dependencies module I get the following message "all the required merge modules" found + a green light.

  Thanks for your help!

  Hello

  I suggest you to run the MSI blast first and then perform the relocation.

  Best regards

  Mark M.
  Technical sales engineer
  National Instruments UK & Ireland

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• graphics problems with adobe flash player on android

  How is it possible for me to update my flash drive on my Android? Apart from youtube, I can't watch videos and audio. Apparently I have to activate flash on my chrome but I can't do it. Help please?

  Hi rachelle5694,

  Flash Player is no longer supported on Android, however, you can install it manually on your own, or use a different browser on your Android device.

  Please check the KB: install manually on Android devices

  Kind regards

  Rave

• Major problem with Web on Android content

  I'm having a problem with the Web content on Android devices.

  
  

  When I create a frame with Web content or when I embed some content (Google Maps, Vimeo) and even with the edge entertainment animate, the content does not appear in the correct size. Initially, it shows really big and when I select the option 'Scale content worthy', it becomes really small. Content Web works fine on iOS, but I'm having this issue on Android.

  
  

  Is there something I can do?
  

  I spent a few hours trying to find a way to solve this problem and I think I found one that work especially well with edge entertainment and the embedded code, in case someone is having the same problem...

  1. On Android, content web poster automatically once greater than it actually is, this means that web content with a size of 1000 x 1000 px, appears as if it were 2000 x 2000 px.
  2. If you select the "Scale to fit content" option, the size is multiplied by 0.75. This means that our 1000 x 1000 web content will display as if it were a 750 x 750 px.

  You have two options here...

  1. If you don't select "Content scale to fit", you need to create your content as if it was half, that he really wants to be. For example, our 1000 x 1000 px web content must be resized to 500 x 500 px. After that you just have to create a framework with the actual size (1000 x 1000 px in this case) and paste web content and resize it (adjust the content proportionally).
  2. If you select "Adapt content to fit", you need to create your content 0.25 times greater. For our 1000 x 1000 px web content, you need to resize to 1250 x 1250 px so when Indesign adjusts (0.75 times), the size will be in place that we want.

  I tried both methods with edge on 2 Android smartphones and tablets Android 2 animations and they appear to the right. However, I just tried with the embed code (Google Maps, YouTube, Behance). I didn't until present bugs with my 'solution '.

• Problem with DPS App Builder and iPhone

  Anyone else see a problem with launcing is a 'DPS App Builder"App on the iPhone 4S. The app will launch, shows the splash screen and then close. Closing the application or the phone and launch new doesn't make any difference. He arrived with version 22 or 23. The same app launched on an iPad 2 has no problem.

  Anyone else seeing this?

  Ok. I built a new version of 22 App from scratch rather than update the 21 to 22 version I already had my DPS App Builder. This time it worked, no crash at launch on the iPhone. Also downloaded an edition in the sandbox and it worked fine.

  I would caution anyone to spend 21 to 22/23 with this new version of the App Builder. Take the extra few minutes and build it from scratch.

  Thanks for the pointer to Nathan.

• Problem with the movieclip by double loop

  Hello, this is more a problem of logic programming that actually a problem with the code.
  
  I'm building a schedule where each month are built on the fly with the movieclip duplicate for each day (with an empty textfield). I am building the calendar according to the number of days of the month has, he begins to what day of the week, etc, etc..
  
  Then I load an external xml with the new arrivals. Subsequently, I need to check the days of this month were new. At the moment I have 2 parts in stock in my xml stream ( http://s50699.gridserver.com/xml/news_en.xml). It all works very well.
  
  However, I only manage to highlight a day of this month, the last news item-, which means that the loop runs twice, but he recorded only the last number, so the day highlighted that shows on the calendar, is, therefore, of this last point news.
  
  I attached the code below and will be really grateful for any help or general advice.

  _root ['dot' + s] does not know he has a report any with the number i after the advances of your loop. in particular, by releasing _root ['dot' + s] I'll be the last value of your loop.

  to remedy this, use a variable that stores the value of i when _root ['dot' + s] is created:

  .Ivar _root ['dot' + s] = i;

  and use this.ivar rather than I in your onRelease handler.

• Problem with Cisco requested orders IOS CLI

  So I try to reload the router with EEM.  However, I want it done via the cli action statement, so I can delay the cooldown to 10.  However, I have problems with the model keyword.  Here's my applet and debugging.  It seems that the declaration of model does not meet what is asked.  I've tried several different combinations, but this one made the most sense to me.

  Event Manager applet

  event no

  message from syslog to action 1.0 "router Reload."

  command action 1.1 cli 'enable '.

  model "reload in 10" action 1.3 cli command 'yes '.

  command action 1.5 cli "confirm".

  action syslog 1.7 msg "it worked!"

  * 1 Mar 00:37:18.831: % HA_EM-6-LOG: TEST: reload router

  * 00:37:18.839 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >

  * 00:37:18.939 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.

  * 00:37:18.955 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10

  * 00:37:18.967 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: confirm

  R2 #.

  R2 #.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: % If please answer 'yes' or 'no '.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: the system configuration has changed. Save? [Yes/No]:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  The manual way:

  R2 #reload in 10

  The system configuration has changed. Save? [Yes/No]: Yes
  Building configuration...
  [OK]
  Recharge regular in 10 minutes by the console
  Reload reason: reload command
  Proceed to recharge? [confirm]
  R2 #.
  * 00:56:27.083 Mar 1: % SYS-5-SCHEDULED_RELOAD: Reload asked at 01:06:22 UTC Friday, March 1, 2002 at 00:56:22 UTC Friday, March 1, 2002 by the console. Reason for reload: reload the command.

  I tried this:

  Event Manager applet
  event no
  message from syslog to action 1.0 "router Reload."
  command action 1.1 cli 'enable '.
  Action 1.2 cli command "wr".
  model "reload in 10" action 1.3 cli command "confirm".
  action syslog 1.7 msg "it worked!"
  !
  end

  R2 #.
  R2 #.
  #event R2 Manager run TEST

  * 1 Mar 00:54:52.855: % HA_EM-6-LOG: TEST: reload router
  R2 #.
  * 00:54:52.863 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >
  * 00:54:52.963 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:52.979 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #wr
  * 1 Mar 00:54:53.895: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 00:54:53.899 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: building configuration...
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: [OK]
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:53.903 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: it worked!
  R2 #.
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  Your second approach is good, but you aren't answer the prompt.  Add:

  Action 1.8 cli command 'y '.

• Problem with Android config.xml

  Hi all

  I work with a team, and we are more familiar with versions of iOS.

  We have created this file config.xml for the Android build, however, when we try to download and test it on devices, it crashes after opening.

  I guess the config.xml document can contain errors, the cause.

  You could review the config.xml for Android below and provide your thoughts or even a basic config.xml we could use?

  <? XML version = "1.0" encoding = "UTF-8"? >

  < widget xmlns = " " http://www.w3.org/ns/widgets "

  xmlns:gap = " " http://PhoneGap.com/ns/1.0 "

  xmlns:android = " " http://schemas.Android.com/APK/RES/Android " " "

  ID = "com.company.appname".

  versionCode = "20".

  version = "2.0.0" >

  < name > APPNAME < / name >

  < description > Description Here. < / description >

  " < author href = ' http://www.company.com "email =" [email protected] "> AuthorName < / author > " "

  < name of option = "phonegap-version" value = "cli - 6.3.0" / >

  < name of option = value "android-build-tool" = "gradle" / >

  < name of option = "orientation" value = "default" / >

  < name of option = "full screen" value = "false" / >

  < name of option = "target device" value = "combined" / >

  < name of option = "webviewbounce" value = "false" / >

  < name of option = "rentals-icon" value = "false" / >

  < = "stay webview" option name value = "false" / >

  < name of option = "detect types of data" value = "true" / >

  < = 'exit suspend' option name value = "false" / >

  < name of option = "show-splash-screen-spinner" value = "false" / >

  < = "auto hide splash screen" option name value = "false" / >

  < name of option = "FadeSplashScreen" value = "true" / >

  < name of option = "EnableViewportScale" value = "true" / >

  < name of option = "MediaPlaybackRequiresUserAction" value = "false" / >

  < name of option = "AllowInlineMediaPlayback" value = "true" / >

  < name of option = "BackupWebStorage" value = "none" / >

  < name of option = "TopActivityIndicator" value = "white" / >

  < name of option = "KeyboardDisplayRequiresUserAction" value = "false" / >

  < name of option = "KeyboardShrinksView" value = "true" / >

  < name of option = "HideKeyboardFormAccessoryBar" value = "false" / >

  < name of option = "SuppressesIncrementalRendering" value = "false" / >

  < = 'windows-identity-name' option name value = "" / > "

  < name of option = "android-minSdkVersion" value = "0" / >

  < name of option = "android-targetSdkVersion" value = "14" / >

  < name of option = "android-maxSdkVersion" value = "16" / >

  < = "android-installLocation' value = 'auto' option name / >

  < name of option = "SplashScreenDelay" value = "1000" / >

  < name of option = "ErrorUrl" value = "null" / >

  < name of option = "BackgroundColor" value = "0x000000" / >

  < name of option = "DisallowOverscroll" value = "true" / >

  < name of option = "LoadingDialog" value = "," / >

  < name of option = "LoadUrlTimeoutValue" value = "null" / >

  < name of the plugin = "cordova-plugin-inappbrowser" / >

  " < allow intention href = ' http://*/* " />

  " < allow intention href = ' https://*/* " />

  < allow intention href = "" Tel: * "/ >"

  < allow intention href = "" sms: * "/ >"

  < platform name = "android" >

  < / platform >

  < src = "icon.png icon" / > "

  <! - to PhoneGap android splash screens - >

  < platform name = "android" >

  < splash src = "androidl.png" density = "ldpi" / > "

  < splash src = "androidm.png" density = "mdpi" / > "

  < splash src = "anroidh.png" density = "hdpi" / > "

  < splash src = "androidx.png" density = "xhdpi" / > "

  < / platform >

  < / widget >

  Thank you very much for your help!

  1. replace this value = 15:

  2. change it to a value between 15 and 24:

  3. change it to a value > = 16 and > = targetSdkVersion

  4. This combination is foolish, as yu say: "do not automatically hide my splash, and after 1 second. :

  5. your white list rules do not work, because you are missing the plugin whitelist.

  Add

  6. you can add projections for xxhdpi and xxxhdpi.

  How your app "crash"? Do you get any error messages? External content is not loaded?

• Problem with video calling on Android...

  Everything works fine but the video call is very dark on my android 4.1.2. Either way, my front cam is 1.3 mega pixels, but the same problem with my camera back which is 8.0 Mega Pixels... but when I open my camera its light show app. In this way I hate this... Please solve the problem of video calling...

  qa60
  Check your internet connection or check your microphone or try again with handfree...

• C in XCODE build problems with VISAS / NOR

  Hello

  I'm developing a C program to connect with my oscilloscope Tektronix. I inherited this project from a friend (who is currently in the secret), so I can't talk to him on this subject.

  On my system: I'm running OS X 10.8.4, development in XCODE 4.6.3. Initially, I had problems with NI-VISA 5.3, and they are repeated when I upgraded to 5.4 (I thought the upgrade would solve the problem).

  It's also a position of the cross. I posted on the forum of developers to Apple without success (https://discussions.apple.com/message/22681139#22681139). If my problem is solved it there first, I'll post the solution here as well. I don't take sides.

  In fact, my problem is that my program will not be built because of a linker issue. I use the functions of the NI-VISA 5.4 for OS package X 10.8. However, the linker can't find the correct functions for my system:

  Undefined symbols for x86_64 architecture:

  "_viClose", referenced from:

  _setupVI in oscilloscope.o

  _getData in oscilloscope.o

  _closeInstr in oscilloscope.o

  "_viOpen", referenced from:

  _setupVI in oscilloscope.o

  "_viOpenDefaultRM", referenced from:

  _setupVI in oscilloscope.o

  "_viRead", referenced from:

  _setupVI in oscilloscope.o

  _getData in oscilloscope.o

  "_viStatusDesc", referenced from:

  _setupVI in oscilloscope.o

  _getData in oscilloscope.o

  "_viWrite", referenced from:

  _setupVI in oscilloscope.o

  _getData in oscilloscope.o

  LD: symbol not found for architecture x86_64

  Clang: error: the linker command failed with exit code 1 (use - v see invocation)

  This is all pretty basic VISA functions. I struggled in just, including the appropriate header file

  #include

  did not work. When I went to the detailed shape, it worked:

  #include "/ Library/Frameworks/VISA.framework/Versions/A/Headers/visa.h".

  However, then the problem began to occur that I have now - links in the object editor cannot find the code for the functions of the VISA. I tried to change build architctures x86_64 for only x 86, without success. I am currently building in i386 x 86. I also tried (to the title of the Phases of construction-> link binary with libraries) to link the VISA.framework to the project, but this simply gives the error of the linker 'not found VISA framework '. I also tried option-clean.

  I feel I am missing something very obvious. I'm still operating under the notion that either NI-VISA has not been installed in the correct location, or that my configuration settings are incorrect.

  Does anyone have any idea to lend? I searched through various forums for help for almost 2 days now, with nothing doesn't.

  resolved cross wire https://discussions.apple.com/message/22682742#22682742

  copied settings from: Instruments/NI-VISA/Examples/C/ExamplesProject.pbproj National

  done with:

  I ended up using the final settings:

  Architectures

  Architecture: $NATIVE_ARCH_ACTUAL

  Build the Active Architecture only: No.

  Valid architectures: i386, x86_64

  Search paths

  Unframed search paths

  No library search path

  Build Phases

  Link binary with libraries: VISA.framework

  I think it's now/Library/Frameworks in the search paths, what was causing my problems when you try to link binary.

  Thanks to xnav and Frank (had the idea of original law, which I tried but just the wrong way).

• Problems with secondary after building the application .exe

  Hi people,

  as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.

  I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.

  I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.

  I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278

  Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.

  I hope that I am too dumb to find the answer and that there will be a quick solution.

  If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?