Problem with clip color when you export a sequence

Similar Questions

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Distortion when you export the sequence with after effects Comp

  Hi all

  I'm trying to export a video sequence that is made up of ordinary clips and some clips that I replaced with AE Comps.  Most of the time, I use AE only to the function of stabilizer Warp in this project.

  The problem is that even if the video is smooth in AE and creation, as soon as I export to several different formats, the AE Comp clips appear random distortion in reading bits - a bluish white rectangle blinks sometimes on the entire width of the screen, or parts of a person's body will be radically Pixelize as if I were online video streaming.  Curiously, if I export the same sequence again (just like I did before), some extracts of lose completely distortion or distortion in different areas / at different times of the experience.

  Has anyone else had a problem with that?

  Can someone tell me where the problem might be?  I am new to AE, so I might do something wrong.  Also, it's the old images taken from a Pocket camcorder, so the quality is not great - would that be a problem?

  Thanks in advance for any help.

  About recommendations for hardware, see this:

  FAQ: Which computer and components should I buy for Premiere Pro?

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• problem with checkbox custom when you use the loadVariablesNum

  I have several cutomized box that he can select or deselect and I have a button to determine which of the boxes is selected and through this button, I spent the variable to loadVariablesNum corresponding to which of the boxes is selected.

  ==================================================

  the code in the button to determine which of the boxes is selected:

  ==================================================

  If (chk1.mark1._visible = true) {}
  trace ("31");
  loadVariablesNum ("http://url?uid=" + _root.uid + "& years = 31", 2);
  }
  If (chk2.mark2._visible = true) {}
  trace ("32");
  loadVariablesNum ("http://url?uid=" + _root.uid + "& years = 32", 2);
  }
  If (chk3.mark3._visible = true) {}
  trace ("33");
  loadVariablesNum ("http://url?uid=" + _root.uid + "& years = 33", 2);
  }
  If (chk4.mark4._visible = true) {}
  trace ("34");
  loadVariablesNum ("http://url?uid=" + _root.uid + "& years = 34", 2);
  }
  If (chk5.mark5._visible = true) {}
  trace ("35");
  loadVariablesNum ("http://url?uid=" + _root.uid + "& years = 35", 2);
  }

  I'm assuming that you have a problem with it not working.  A problem with it is that when you make the comparison conditionals, you use == to see if things are equal, not =

  In addition, not a mistake, but to less treatment works... you must use "elsewhere" so that once the program finds a match it does not all the remaining conditions, which would make you currently.

  If (true chk1.mark1._visible == ) {}
  trace ("31");
  loadVariablesNum ("http://url?uid="+ _root.uid +"& years = 31", 2);
  } Else if (chk2.mark2._visible == true) {}
  trace ("32");
  loadVariablesNum ("http://url?uid="+ _root.uid +"& years = 32", 2);
  } ElseIf...

  In addition, the solution of the error can be simplified in your case because you are using Boolean values (true/false).  When a conditional tests something that he's just looking to see if the value it evaluates as true or false, so your conditional statements have not even the 'is true ".

  If {(chk1.mark1._visible)
  trace ("31");
  loadVariablesNum ("http://url?uid="+ _root.uid +"& years = 31", 2);
  } Else if (chk2.mark2._visible) {}
  trace ("32");
  loadVariablesNum ("http://url?uid="+ _root.uid +"& years = 32", 2);
  } ElseIf...

  One last thing... it seems that you have created unnecessarily box different symbols where you might have used the same as that for all of them.  I say this because to see how you have different brand # for each of them.   Just assign the same name to a different instance...

  If {(chk1.mark._visible)
  trace ("31");
  loadVariablesNum ("http://url?uid="+ _root.uid +"& years = 31", 2);
  } Else if (chk2.mark._visible) {}
  trace ("32");

  This example is used to emphasize the difference between symbols and instances.  The same symbol (such as a radio button or your craft boxes) can be reused multiple times by using the names of different instances for each instance.  You can then assign unique values to the properties of each instance

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with new monitor when you play Cityville

  Recently installed new monitor (HP2511x), now the zoom in/out function does not work in Cityville.  It works very well to Farmville, and it still works in Cityville on my laptop, so it's something on the new monitor.  Any ideas?

  It sems to be a chip on board:
  http://en.Wikipedia.org/wiki/GeForce_6_Series#GeForce_6150SE

  You have no problem with your old monitor?
  Did you use another resolution (bottom) with the old?
  You can try to fix this old resolution for your new monitor, too.

  Then there should be no problem for your graphics chip.

  HTH
  C.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• Problem with your comments when you run Skype and Team Viewer 11

  G ' Day of Australia.

  Today, I downloaded the latest version of Skype. I have Windows 7 Professional.

  I contacted my friend on Skype and videoconferencing worked perfectly.

  I then tried to take control of his computer via Team Viewer 11.

  Hi, the computer is a Toshiba Satellite Pro running Windows 7.

  Unfortunately, when I talked to him he got terrible echo feedback. He tried to plug the headphones in his computer, but also got terrible feedback when I talked to him. He also cut its speaker and still got feedback.

  I've heard for me no problem.

  I hope that there is some good soul out there who can help.

  Thank you.

  Paul.

  Wow Techfreak.

  Thanks a lot for your response altogether.

  Works perfectly now.

  Best wishes and keep up the excellent work.

• Problems with Service Packs - when you try to install Service Pack 2, it says I have to install SP1. When I try to install SP1, it says that I have already.

  My automatic update did not work, so I went to the site to try to download Service Pack 2, one seemed to have trouble with my computer. After I downloaded it, I tried to run, but he said I had to download Service Pack 1. So I did it. When I try to run this file, it says I have already installed Service Pack 1. So I tried to restart the Service Pack 2, but she is always claiming that I need Service Pack 1. I don't know what I'm supposed to do. Can anyone help? I'd be happy.

  Hi mistyrayns

  
  You can check if the below steps help-
  Step 1:
  I suggest you to check if you have information that service pack 1 is present on the computer. You can click Start and run. Then type msinfo32 and press ENTER. Check if Service pack 1 is present in the information provided.

  Step 2:

  If you have service pack 1 installed, and mentioned in the information from the computer, then I suggest you refer to the article below and uninstall service pack 1 computer.

  http://support.Microsoft.com/kb/948537

   

  Step 3:
  After successful uninstallation of SP1, try to install both service pack 1 and 2. Check if the issue is resolved.

  I hope this helps.

• Problem with the color when sending file AE to first.

  I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and

  everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes

  Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to

  This I skip a step which can be primary. Help is very appreciated.

  Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.

  Mylenium

• Problem with distortion website when you view in different browsers

  Hello

  I just designed and published a website in Muse (www.stmaryredcliffedevelopment.com) on my macbook. When I publish and display in Safari on my macbook, it looks as it should. When I publish and watch it in Chrome on my macbook, there are a few minor variations, but nothing too disturbing. However, in some browsers (including Safari), when viewed on a PC, some elements if my head, as well as various parts of my pages, either disappear or move, distort the overall appearance of the site. Is there a way to make sure that the site retains the elements of design seen on all browsers and different screen sizes?

  Thanks for your help.

  Rhys

  I tried to check with Chrome on PC as well in Mac but don't see the behavior you mentioned, can you point me to the exact content that does not appear in PC browsers? screen capture will help you.

  Thank you

  Sanjit

• problems with JAX - WS when you use security (e.g., username token profile)

  Hello
  I have a JAX - WS 2.1.5 deployed on weblogic 11g (10.3.1) with this policy:
  
  < wsp:UsingPolicy wssutil: required = "true" / >
  < wssutil:Id wsp = "Hdm-UserNameToken-Plain" >
  < ns1:SupportingTokens xmlns:ns1 = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200512" >
  < wsp >
  < ns1:UsernameToken ns1:IncludeToken = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200512/IncludeToken/AlwaysToRecipient" >
  < wsp >
  < ns1:WssUsernameToken10 / >
  < / wsp >
  < / ns1:UsernameToken >
  < / wsp >
  < / ns1:SupportingTokens >
  < / wsp >
  
  I have another web application as a client that uses a JAX - WS SOAP Manager to communicate with the web service
  and everything works fine when my client runs independently, i.e. in Eclipse (JDK 6) (anthentication traverse)
  
  My Manager handleMessage() method is shown here:
  public boolean handleMessage (SOAPMessageContext context) {}
  out final Boolean context.get (MessageContext.MESSAGE_OUTBOUND_PROPERTY) = (Boolean);
  If (outgoing)
  try {}
  Get the SOAP envelope
  final SOAPEnvelope envelope = context.getMessage () .getSOAPPart () .getEnvelope ();
  
  Header may or may not exist
  SOAPHeader header = envelope.getHeader ();
  If (header is nothing)
  Header = envelope.addHeader ();
  
  Add WSS Usertoken Element Tree
  final SOAPElement security = header.addChildElement ("security", "WSSE", "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd");
  final SOAPElement userToken = security.addChildElement ("UsernameToken", "WSSE");
  userToken.addChildElement ("Username", "wsse") .addTextNode (userName);
  userToken.addChildElement ("Password", "wsse") .addTextNode (password);
  
  }
  catch (exception-SOAPException ex) {}
  ex.printStackTrace ();
  Returns false;
  }
  
  Returns true;
  }
  
  but when I deploy the same client on weblogic server, it fails to communicate with my web service with this error:
  javax.xml.ws.soap.SOAPFaultException: failed to add the security for the identity, uri token = http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken token
  
  I noticed that Weblogic has a few packages to manage the security as:
  weblogic.wsee.security.unt.ClientUNTCredentialProvider
  weblogic.xml.crypto.wss.provider.CredentialProvider
  weblogic.xml.crypto.wss.WSSecurityContext
  
  So I added another mechanism using weblogic package to add the username password to SOAP header
  
  Map < String, Object > request = (proxy) .getRequestContext ((BindingProvider));
  If (connectInfo.get ("username")! = null & & connectInfo.get ("password")! = null) {}
  The list < CredentialProvider > credProviders = new ArrayList < CredentialProvider > ();
  client side UsernameToken credentials provider
  CredentialProvider cp = new ClientUNTCredentialProvider ((String) connectInfo.get ("username"),)
  ((String) connectInfo.get ("password"));
  credProviders.add (cp);
  Request.put (WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);
  }
  
  It seems to be ok, but only for weblogic.
  
  I don't want to use weblogic propritery style in my client code, i.e. using API ClientUNTCredentialProvider, WSSecurityContext etc., because for the latter to use I would need to have the jar of Weblogic that would make me a more questions...
  
  Is it a matter the or am I missing something, please suggest how to add security to identity token in SOAPHeader without using the API specific Weblogic?

  I am happy that it worked, please check the pst that had helped so that it benefits others, I can only think of this solution. If you do not want to change the

  http://JAX-WS.Java.NET/articles/MessageContext.html
  http://tugdualgrall.blogspot.com/2009/02/JAX-WS-how-to-configure-service-end_17.html

  Kind regards
  Sunil P