Problem with the color when exporting to other Adobe programs

Similar Questions

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Problem with the color when sending file AE to first.

  I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and

  everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes

  Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to

  This I skip a step which can be primary. Help is very appreciated.

  Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.

  Mylenium

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• Problems with the colors

  I hope that makes sense for everyone, somehow when I was messing around with the colors on my screen, well, I thought that I just changed the outline of color display box well apparently not whenever I'm looking for something on the bottom of some site web it is comes in blue instead of white like it's supposed to be , and it's really hard to read things on a blue background, I tried everything I know possible to fix it. Please if anyone can help me it will be greatly appreciated! Thank you all! Have a great day!

  If you are using Internet Explorer, select Tools, Internet Options , and then click the color on the first page (e.g. General) of the Internet Options dialog box.

  

  Put a tick the use Windows colors option and click OK at the bottom. Click OK again to close the Internet Options dialog box.

• Problem with clip color when you export a sequence

  Work on an iMac i7, CS 5.5

  I created a composed sequence 3 staples. I color corrected the first two (using the RGB curves Corrector) but not the last one. The clips are transcoded DNxHD original AVCHD (which I can't treat gently on my iMac). When I saw and/or make my sequence, the colors are great for all the clips.

  When I try to export it as a Quicktime H.264 movie, the first two clips are rendered as I want to, but the last of them (with no color correction) only has the plan of the blue color!

  I tried to export directly (without delay) or by using the queue of the SOUL, but the results were identical.

  One solution is to 'pretend' to correct the colors the last clip (barely, I adjusted the Red). Then export works very well.

  Sounds like a bug to me candidate!

  Known problem and workaround: movies have a blue cast when exporting through Adobe Media Encoder in Adobe Pro CS5 first or CS5.5

• Problem with the menu when creating Bluray

  Hello world

  My first post here and not really a professional in creating...

  I recently create a project still 5.1.0.342.

  The project is made of some exported videos first.

  The problem is that when I build a bluray image (file works the same and I have not tried disk because I don't want wasting them) there is absolutely no menus.

  I created a set of chronologies, some in playlist (no chapter selection) and named 3 menus associated with a video in the background.

  When I check the project all that I get no error and the entire construction I've tried so far is well over.

  When I saw after the restitution of everything on the menu is very good.

  When I build the DVD image everything goes according to the preview and the chart.

  When I build the BluRay all the files appear to be in the bluray (I can access everthing with the option of selecting players), but there is no menus.

  I found videos with buttons and circles, but they are like other videos, they are not menus...

  If anyone has any idea I'll take.

  Thank you for reading me and sorry for my English, I'm french.

  If you have a BD - RE disc, then please try to burn to disc.

  And if the menu is set as the first piece, it will appear after inserting the disc. (Anything defined as part of the project appears on the disc.)

  Thank you

  Ramesh.

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problem with the virtual copy exports - JPEG vs DNG

  Hi all - just a quick question - I have a set of photos developed in LIghtroom that include several virtual copies of which I now want to export to in the form of final versions on my hard drive. All virtual copies are B & w versions of the masters (post-processing work also differs slightly on the top of the b & w preset).

  I need a patch of JPEG and DNG files.
  Export to JPEG files seems to work without a hitch and all the pictures come out like in Lightroom.
  Exporting DNG however come with a question - all virtual copies come out as images themselves IE. not virtual copies, but they are more b & w as they are supposed to be, but go out like color.

  Color version masters come out well. Exports of virtual copy have different look (as expected) and the file size slightly different (also planned?) suggesting this only thing missing for me is the parameter b & w.

  I have tried everything to fix this problem with no use - export the virtual copies separately etc. As already said - JPEG works, but DNG does not...

  Someone at - he experienced this and if so any suggestions on how to fix...?

  Thks a lot!

  V

  DNG files are 'RAW' files - they cannot be changed.

  You can export only B & W versions as (pixel database files) as JPG or TIFF

  You can export copies of a DNG, but they are still RAW.

  You can embed data in a DNG file (containing similar to XML with the NAVE sidecar files and raw CR2 files), but editing will be visible in software that can interpret the raw data (like Lightroom or ACR)

• Forms is displayed with the color when a form is called from a menu

  Hi all
  
  I've recently migrated all forms and menus of 6i to 10g As. Now, I have a menu with some menu items, and a special menu item called a form of it, and the called form has buttons which calls another form of it even.
  
  The problem is, when I call the shape of the menu item, the form is displayed with a color. I mean the text Element and push button are colorful. And of the shape called if I press a button that calls back a form, or even the 2nd form called appears the color. (Same color appears in all forms).
  
  But the Forms seem to be color when the form is called directly ( not through any form or Menu ) just passing form name in the URL.
  Also checked the property Palette and doesn't seem that any color specified anywhere.
  
  What could be the problem?
  And what all (in the property Palette) should I need to check this?
  
  Published by: Charlie on April 13, 2011 10:31

  and what color is? If it is gray, it sets with the gray of co.or?