problem with the colors when printing to PDF in FM9

Similar Questions

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with the color when sending file AE to first.

  I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and

  everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes

  Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to

  This I skip a step which can be primary. Help is very appreciated.

  Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.

  Mylenium

• Problem with serial key when printing to PDF format

  I had the problem described in http://helpx.adobe.com/acrobat/kb/11001-update-printing-issue.html...  The workaround described in the article doesn't work, end users always be prompted to enter a serial key...

  We are running:

  Danish language of Windows 7 64 bit

  Office 2010 32-bit Danish

  Acrobat Adobe 11.0.0 English

  can someone help me?

  Thanks in advance...

  Jens Nygaard

  You need to install 11.0.01 or more later than solves it.

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Problems with the colors

  I hope that makes sense for everyone, somehow when I was messing around with the colors on my screen, well, I thought that I just changed the outline of color display box well apparently not whenever I'm looking for something on the bottom of some site web it is comes in blue instead of white like it's supposed to be , and it's really hard to read things on a blue background, I tried everything I know possible to fix it. Please if anyone can help me it will be greatly appreciated! Thank you all! Have a great day!

  If you are using Internet Explorer, select Tools, Internet Options , and then click the color on the first page (e.g. General) of the Internet Options dialog box.

  

  Put a tick the use Windows colors option and click OK at the bottom. Click OK again to close the Internet Options dialog box.

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Problem with the HP P2055DN printer.

  I use printer mentioned above often print 2-sided documents. The printer is connected RJ45 print router-switch and laptop sent by wireless LAN. After a few days (2-4) the printer in Control Panel 'forgets' duplex. I have to go into the control panel and enable the setting of the duplex to "installed". It works just fine a few days and the problem recurs.

  Can someone help me?

  I have the same problem with a 2605DN

  I have not tested but the key "Reg" is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\HP Color LaserJet 2605 PCL6 class Driver\DsDriver, which has a printduplexsupported value that should be set to 01. If you set it in the printer driver, and then save the key "reg" by exports then right-click on DSdriver in the left panel, it will give you a file, you can double-click to set up the key as part of your departure or office.

• Problem with automatic charger when printing with photo paper

  Hello

  Printing is fine EXCEPT when I try to print photos on paper HP Advanced.  I set it up to print several photos of different size on 8 1/2 x 11 via a software program.  I've never had a problem in the past.  Paper just sits there and do not feed, and finally pushes through with nothing printed.  Or if I push forward to get through, it is not aligned correctly as don't feed properly in order not to print the part of photos.  If all goes well, I'm explaining this to as you can understand the problem.

  Basically, there is a problem automatically feeding paper photo, even if I use high-quality paper.

  Can someone help, please?

  HP Photosmart C4795

  HP Presario Desktop, Windows XP SP3

  Thank you

  Gail

  You change the paper type in the print settings to reflect the paper chosen for the print job? Pages 22 - 23 has this process listed in the user manual if one any showing this post wants to look.

  I reset the printer, clean the rollers, check the print settings. This document here describes the steps to follow. I know that you do not get a hard copy of the error message, but the steps are the same for your problem to feed paper. I hope this helps.

• Forms is displayed with the color when a form is called from a menu

  Hi all
  
  I've recently migrated all forms and menus of 6i to 10g As. Now, I have a menu with some menu items, and a special menu item called a form of it, and the called form has buttons which calls another form of it even.
  
  The problem is, when I call the shape of the menu item, the form is displayed with a color. I mean the text Element and push button are colorful. And of the shape called if I press a button that calls back a form, or even the 2nd form called appears the color. (Same color appears in all forms).
  
  But the Forms seem to be color when the form is called directly ( not through any form or Menu ) just passing form name in the URL.
  Also checked the property Palette and doesn't seem that any color specified anywhere.
  
  What could be the problem?
  And what all (in the property Palette) should I need to check this?
  
  Published by: Charlie on April 13, 2011 10:31

  and what color is? If it is gray, it sets with the gray of co.or?

• Problem with clip color when you export a sequence

  Work on an iMac i7, CS 5.5

  I created a composed sequence 3 staples. I color corrected the first two (using the RGB curves Corrector) but not the last one. The clips are transcoded DNxHD original AVCHD (which I can't treat gently on my iMac). When I saw and/or make my sequence, the colors are great for all the clips.

  When I try to export it as a Quicktime H.264 movie, the first two clips are rendered as I want to, but the last of them (with no color correction) only has the plan of the blue color!

  I tried to export directly (without delay) or by using the queue of the SOUL, but the results were identical.

  One solution is to 'pretend' to correct the colors the last clip (barely, I adjusted the Red). Then export works very well.

  Sounds like a bug to me candidate!

  Known problem and workaround: movies have a blue cast when exporting through Adobe Media Encoder in Adobe Pro CS5 first or CS5.5

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner