Problem with cluster containing different objects!
Hello to all 2!
Here's what I'm trying to do:
-J' have a group of 3 elements: 2 Boolean and 1 controls arrow.
-I want to display all the objects in the cluster and disappear in sequential order: Boolean - invisible; arrow - invisible, Boolean - visible; arrow-visible, invisible 2 - Boolean and so on.
I have attached a vi in which I tried to address this issue, but without success.
Any ideas?
Thank you very much!
Andrew.
Andrew,
Make the arrow a Boolean control with an image of an arrow. Then, all the controls are Boolean values, and visibility can be controlled by a simple loop.
Lynn
Tags: NI Software
Similar Questions
-
What is the problem with the conversion of objects with gradients to the gradient mesh?
What is the problem with the conversion of objects with gradients to the gradient mesh?
Radial gradients are special, and it could become difficult edit the gradient mesh resulting.
Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.
-
Problem with synchoronization of shared objects.
I encountered a small problem with shared objects.
I'm working on a program that creates a fixed size of 30 users chat rooms. When the user 31 comes, a new room is created.
The idea is that the client connects to the first room first and check if it is full by connecting to shared objects. If it is full, the connection is closed and process is repeated on a new instance of the application.
I use a function to connect to an instance, which takes as a parameter a number (1 for the room_1 instance, 2 for room_2, etc.). The function itself creates the Netconnection and sharedObject necessary objects.
If a room is full, Netconnections and sharedObjects are closed and the function is called again with another number.
I have no problem to connect to the first room, but after the closing of the first connection and connect to the new room, there seems to be some problems with the shared objects (in particular, OnSync seems not to run after liaising with shared the new instance objects).
I was wondering if you had any ideas what could cause this. It is the use of the same variable names to connect to two different shared objects?
Here's the function:
function initStreams (room) {}
client_nc = new NetConnection();
client_nc. Connect ("rtmp://192.168.0.4/Elearning/room _" + room);
in_ns = new NetStream (client_nc);
in_ns2 = new NetStream (client_nc);
Replay_video.attachVideo (in_ns);
out_ns = new NetStream (client_nc);
out_ns2 = new NetStream (client_nc);
in_ns. Play ("my_recorded_stream");
users_name = SharedObject.getRemote ("users_name", _root.client_nc.uri, false);
users_name. Connect (_root.client_nc);
users_language = SharedObject.getRemote ("users_language", _root.client_nc.uri, false);
users_language. Connect (_root.client_nc);
users_picture = SharedObject.getRemote ("users_picture", _root.client_nc.uri, false);
users_picture. Connect (_root.client_nc);
users_finger = SharedObject.getRemote ("users_finger", _root.client_nc.uri, false);
users_finger. Connect (_root.client_nc);
}
I need you more information, I can post more code on the forum.
Any help would be really appreciatedI don't see all the onStatus events in the code you posted above. If you set the outside function onstatus event, that's the problem. When you set the shared object, you also set it's Manager onStatus of events.
In addition, you really have to wait for the the netConnection onStatus event before plugging your sharedObjects. If you try to connect to the SO before established the netConnection, Society will never connect.
-
Problem with where / contains
I'm trying to generate a list of virtual machines based on the computers of the AD. The first example works very well and I suppose because $group is a string. The second in which $group generated by a query AD does not work. How to convert $group in this case to work with - contains or is at - it another way to structure that?
$group = "SQL02","SQL04" get-vm | where {$group -contains $_.name} $group = Get-ADComputer -Filter 'Name -like "SQL"' | select-object -property name get-vm | where {$group -contains $_.name}
DaveVMware communities user moderator
Now available - vSphere Quick Start Guide
You have a system or a PCI with VMDirectPath? Submit your specifications to Officieux VMDirectPath HCL.
The Select-Object cmdlet does not return a string but an object. You can check by channeling the output to the Get-Member cmdlet.
Get-ADComputer -Filter 'Name -like "SQL"' | select-object -property name | Get-Member
With the - contains operator you then compare a string against a collection of objects.
That won't work.
You could do
$group = Get-ADComputer -Filter 'Name -like "SQL"' | %{$_.Name} get-vm | where {$group -contains $_.name}
____________
Blog: LucD notes
Twitter: lucd22
-
Problems with rotation, resizing of objects and paths
Hello
I've recently upgraded to CS6 (latest version of MAC OS x, Illustrator CS6 last version) and I have some super weird questions that occur.
If I flip a non uniform in shape of path/object it distorts and modifies. Even if I apply a stroke to the path/object and then remove it, it changes the position and shape of the object/path.
I've attached a video for example:
Has proved to be a problem with the option 'snap to grid of pixels. For some reason even if I unchecked it from the options when you create a new file, it was always create objects with the option selected in the Trnasform Panel
Now, I disable when you create a new file and verify that it is turned off during use.
-
squiggly_p4, problem with Spark container
Hello
Environment: Flex SDK 4.5 Hero, Win7 64-bit, Flash Builder 4
Code snippet
< s:Panel >
< mx:TextArea id = "myTextArea" width = "300" height = "200" / >
< / s:Panel >
< s:TitleWindow >
< mx:TextArea id = "myTextArea" width = "300" height = "200" / >
< / s:TitleWindow >
Result:
There is no suggestion for thos Halo TextArea if it belongs to the container of the spark.
Maybe: ContextMenu is uninitialized or not properly initialized.
Thank you
Jing
It is a known problem with the panels of the spark. Please refer to http://forums.adobe.com/thread/706416?tstart=0
Thank you
Ravi
-
Problem with XML and different line break styles
I'm working on a project that is being developed by some developers Flash Builder 4.6 running in Windows and some developers Flash Builder 4.6 running under OSX. We have difficulties due to the difference of newlines between the two environments. In an .as file with line breaks in style UNIX is similar to the following code:
var XML = < document >
< item >
< / item >
< / document >;
xml.appendChild (SomeClass.getXML ());
SomeClass.getXML () is located in a file .as using type line breaks Windows and is similar to the following:
public function getXML (): XML
{
var moreXML:XML = < anotherElement >
< childElement >
< / childElement >
< / anotherElement >;
Return moreXML;
}
When the XML object is serialized and written to a file on a Windows computer, it looks like this:
< document >
< item >
< / item >
< anotherElement >
< childElement >
< / childElement >
< / anotherElement > < / document >
Line for all outside anotherElement breaks are of the form \r\n. Line breaks it contains are of the form \r\r\n, causing thus the empty lines. I'm guessing that the odd line breaks are the cause of the strange setting indented, as well. None of these problems occur when XML is added to the xml file .as that employees style UNIX line breaks.
Is it possible to force the Flash Builder to use UNIX on Windows style line breaks? Otherwise, there are relatively specific to this problem solutions? Thank you!
Section clarified
I found a setting to force a certain style of line breaks: window-> Preferences-> General-> Workspace (delimiter line of file new text). The XML serializes as planned today.
-
Hi all
We will store the objects in a distributed cache (version 3.3) using objects versionnables for optimistic locking. Objects stored in the cache are anti-theft with POF. However, it seems that for values () .contains () and containsValue(), equals() is never called on these objects. The problem we have is that to implement versionnables, we use a field long version, but I deliberately don't compare this field in equals(). However, this means that if I have an object, insert it into the cache and immediately call containsValue() return false(). As far as I know use of the debugger, it seems calling equals() directly on the binary object stored in the cache, which is almost never what you want.
Y at - it a good solution for this?
See you soon,.
ColinI would like to raise objection: that's almost ALWAYS what you want because otherwise, data must be deserialized each time put or get important takes place resulting in a drop in performance!
From my experience, it's ok to compare the form serialized about 99.5% of the time. In the rare cases were you really want to do something special in the equals method, it is of course a royal pain in the XXX that it is made this way...
Otherwise, you're right - this is how it works!
Best regards
Magnus -
I have problems with a few different BSOD.
I was constantly do some different BSOD in the past while, and I'm really getting bored so I thought I'd come here to try and get some answers. The BSOD I get is:
PAGE_FAULT_IN_NONPAGED_AREA (I already tried 1 thing that I found while searching on the internet, don't know if it fixed it or not).
MEMORY_MANAGEMENTIn my view, there is more than 1, but I don't know what it was.
There was also another BSOD I'd get that had nothing to type such as MEMORY_MANAGEMENT, but he had everything else would have a BSOD.
I will try to get more information on these such as the codes STOP or whatever they are called.
Will post when I get them.
For now, I hope someone can start helping me by telling me things such as common causes for these bsod.
Thank you.
Hello
References to Vista also apply to Windows 7.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
and then go look for new ones manually if you wish.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Problem with the persistent store &; object
Hello
I store 2 types of persistentObject in PersistentStore. I find the problem when retrieving the Typeobjet2. The code is:
private void GetPersonFromPhone() { synchronized(store) { data = (Vector) store.getContents(); } System.out.println("\\\\\\\\\\\\\\\\\\ Into GetPersonFromPhone Data = " + data.size()); PersonInfo pi = null; Person p = null; for ( int i = 0; i < data.size(); i++) { System.out.println("Object Got i = " + i + " - " + data.elementAt(i).getClass().getName()); if (data.elementAt(i).getClass().getName().endsWith("PersonInfo")) {
..... data.removeElementAt(i); } } p = null; pi = null; return; } private void SavePersonsToPhone() { PersonInfo info; System.out.println(" To SAVE Persons = " + personVec.size() + " To Store Data Size = " + data.size()); for (int i=0; i < personVec.size(); i++) { info = new PersonInfo(); data.addElement(info); p = null; info = null; } System.out.println("Now DATA size = " + data.size()); synchronized(store) { store.setContents(data); store.commit(); } // Dialog.inform("Success Stored"); info = null; return; } Results
Nobody GOT = name = Mr John Micheal, Email =, URL = store/samples/pictures/Quiver_Tree.png, Send = true
Size PersonVector = 1
Object obtained I = 3 - src.se.PersonInfo
Nobody GOT = name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
Size PersonVector = 2
GOT people = 2 size = 3 data storeAdd new record
Person - McMillan Desilva, [email protected] , SentEmail = false
To SAVE the people = 3 to the data store size = 3
Save I have 0 - name = Mr. Micheal John = Email, URL = store/samples/pictures/Quiver_Tree.png, Send = true
Added Mr. John Micheal, Email = true to vector to the store
I save 1 - name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
Peter [email protected], Email added = true to vector to the store
Save I have 2 - name = McMillan Desilva, Email = [email protected], URL =, Send = false
Added McMillan detailed [email protected], email = false to Vector to the storeThe NEXT TIME that I RAN the APPLICATION
Nobody GOT = name = Peter Simon, email = [email protected], URL = store/samples/pictures/Cascade.png, Send = true
Size PersonVector = 1
Object obtained I = 3 - src.se.PersonInfo
Nobody GOT = name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
Size PersonVector = 2
GOT people = 2 size = 4 data storeTo SAVE the people = 2 to the size of the data store = 4
Save I 0 - name = Peter Simon, email = [email protected], URL = store/samples/pictures/Cascade.png, Send = true
Peter [email protected], Email added = true to vector to the store
I save 1 - name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
Peter [email protected], Email added = true to vector to the store
DATA size now = 6You CAN SEE FROM THE results, how the data changes and incompatibilities. Sometimes he gives good resutls sometimes incompatibilities. Someone can say, where I'm going wrong or what makes the results of the get code.
Thank you
Not looked at seriously, but there seems to be a coding bug in this piece of code:
for (int i = 0; i)< data.size();="" i++)="">
System.out.println ("object got I I =" + i + "-" + data.elementAt (i) .getClass () .getName ());
If (data.elementAt (i) .getClass () .getName () .endsWith ("PersonInfo")) {}
....
data.removeElementAt (i);
}
}Say that the vector has 3 elements inside. You spend the first at the beginning of the second loop, I = 1, and the for loop see data.size () 3. Then you deal with the second and delete. Then when you go back to the loop for I = 2, and data.size () = 2, so you never treat a third.
Of course, logic could just as easily result in code by jumping the elements of the vector.
Maybe that's your problem?
-
Problem with ie6 displaying different for all other browsers
I just created my site and after test with all browsers except ie6 (stupidly) everything works fine, but for some reason in ie6, it displays incorrectly on this page http://www.flitecarz.co.uk/WD-Postcodes-Covered.html the part of the problem is on the right side where there is a quick navigation to the different postcode areas. If you view it in all browsers except ie6, you'll see how its supposed to work.
If anyone can give me a help any with that I'll always be your debt I've been racking me my brains on this all day and I can't seem to find a soloution.
Assistance to receive the greatly.
NessaFrankling wrote:
Hi guys thanks for your replies but I'm quite Frede and would really like it works and I know it can as it worked previously, but of course I've changed something to achieve.
The main reason for this need to work is I have a few people here who use internet explore 6 and I know I can get them to upgrade, but it shows me just the people to use it. If someone can spot what I did wrong, that would be amazing. I have validated my CSS and my HTML and still no luck.
Add style = "" clear: both; ' to the 'colMid' "
as shown below: (or add clear: both; for the css) -
Problem with Direct3D, can make objects in the software WAS.
Hello
I use software WAS whenever I try to return something, it displays an error and the program is closed.
Error reads: -.
Could not initialize Direct3D
Error ID "value cannot be null.
Parameter name: 'Array' Argument is nothing. »
Hi Isabelle,.
Thank you for your response.
I would need more information to help you.
What is the brand and model of the computer?
I suggest you to uninstall and reinstall the latest graphics card drivers compatible for Windows 7 on the computer manufacturer site.
If the problem persists I suggest to create a new user account with administrator privileges.
http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7
For reference:
https://msdn.Microsoft.com/en-us/library/Windows/desktop/hh309466 (v = vs. 85) .aspx
Hope this information helps and let us know the State of the question, we will be happy to help you.
-
question 1: this page says a single license for Photoshop CS6 can be activated on a second computer. It is unclear if one can have a different software on the second computer platform. In my case, my original activation is on a Windows 7 laptop, which got a software upgrade of Windows 10 and therefore the Photoshop CS6 is now working on Windows 10. Now I think to buy a second laptop, that can be an Apple, or it may be Windows base 10. Do I have the right to have the second installation on 10 Windows or Apple? Or the second laptop need only Windows?
2nd question: If two laptops can be installed at the same time with my permit a driving Photoshop CS6, then I have to disable the 1st laptop before installing on the 2nd laptop? And in this case, if my 1st laptop is on Windows 10, can my laptop replacement are allowed to be window 10 or Apple?
question 3: above must answer for my Lightroom 6 also.
Could you provide these answers for me soon, please.
My email address: [Email address removed by Moderator]. I am in Delhi, India. If you can direct me to a representative of your for help with the clarification above, let me know their contact phone numbers.
with cs6, both computers must be pc or Mac. You can exchange your pc license for mac license (and vice versa), an Adobe product for another language or version of trading platform
Lightroom is a cross-dilated license so you can install on a pc and a mac (or 2 Mac or PC 2).
-
Problem with background at different resolutions [was: help dreamweaver CC!]
I am new to Web design, I tried to make my own web page using sensitive design (bootstrap, css, etc.), the site is already the case for a large number of resolutions and it works fine in the preview of the browsers, but say for example I see the iPad website with a resolution of 1024 x 768 , the site is displayed correctly, but if I scroll down on the sides, I can see the rest of the background, and as you know is not very elegant... So what can I do to allow users to see everything they need to see? I tried to give the background of different sizes in different resolutions, but it worked because when I arrived at higher resolutions the CSS queries, I created in lower resolutions are not stayed I left their... Can anyone give me a tip?
[Edited by moderator subject line]
Try to change the width of the images in the percentages as in
-
Problem with extending a View object in OAF R12
Dear all,
I expanded 3 seeded VO in (oracle.apps.ota.learner.server) with the following steps:
1 copied the myprojects folder oracle.apps.ota.learner.server folder
2. create a new workspace and project OA with default package xxarms.oracle.apps.ota.learner.server
3. has created 3 new VO with extended the standard vo by adding a new attribute * "Course_Flag" *: -.
a. xxOfferingSrchVOExt of OfferingSrchVO
b. xxOfferingSrchResultVOExt of OfferingSrchResultVO
c. xxOfferingDetailsVOExt of OfferingDetailsVO
4. has created 3 replacements within the same project Extend.jpx
5 DBA has imported the Extend.jpx
6 copied the xxarms.oracle.apps.ota.learner.server of myclasses folder to the java\classes\xxarms\oracle\apps\ota\learner\server folder
7. customize the page to add the new attribute * "CourseFlag" * with the names of the standard VO
I get the following error when trying to access the page: -.
oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: OfferingSrchResultVO definition of the attribute type is not found in OfferingSrchResultVO
Please advise if I missed a step that caused the error / advise that if there is no step I can fix to resolve the problem.
Thanks in advance to anyone who tried to help :)
Kind regards... JulieHi Ashraf,.
The steps are very good.
The page that you want to have the additional column is having the VO,
Initially, you added this attribute only for VO?
If Yes, what was the reason you extended the other VO?Thank you
With respect,
Kali.
OSSi.
Maybe you are looking for
-
Compatibility of the OSX installation discs?
I went in the OSX installation process and realized, I had the second installation disk. The version I have only sold in a bundle and is inexpensive, where some other versions are much cheaper and sell with only 2 disc, which is exactly what I need.
-
Cannot open my shortcuts on my homepage
When I try to open a shortcut, I get the message, 'the 'http' Protocol has not a registered program. What does that mean?
-
Update the BIOS of motherboard ΜATX-RS880-H
Hello, I'm trying to update the bios for this card (H-RS880-ΜATX) in my HP Pavilion. I am running windows 8.1 (probably a problem) My current BIOS version is 5.03 (May 2009) I found the version 6.11 of 2012 on the hp Web site: http://h10025.www1.hp.c
-
HP desktop computer will not automatically connect to wifi
my hp desktop computer recently refused to connect to my wifi automatically, although he did years before. I have two laptops, an ipad, a blackberry bold and an ipod touch that ALL connect automatically. what the hell is happening?
-
How to keep Num Cap on between switching user accounts?
Sometimes when I go from administrator user account, the NUMLOCK is turned off automatically, I like to keep all the TIME. Does anyone have any suggestions?Thanks in advance for your suggestions