Update the BIOS of motherboard ΜATX-RS880-H

Similar Questions

• update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

  I have a HP Pavilion - XP or version of the original software m7570n!

  Motherboard is HP/Compaq name: Leucite-UL8E

  http://support.HP.com/us-en/document/c00714544

  I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

  Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

  I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

  Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

  THANKS FOR ANY HELP IN ADVANCE!

  TIM

  NOW FOR THE FINAL SOLUTION:

  Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

  NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

  WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

  I googled the error message and found this site:

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

  I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

  SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

  TIM

• Compatibility of the processor and the possible improvements on the motherboard Μatx-RS880-H.

  Desktop HP Pavilion HPE h8-1050z CTO with Windows 7 64 bit
  Processor with six cores AMD Phenom II X 6 1065T

  8 GB DDR3 1333 MHz SDRAM

  My PC has a motherboard Μatx-RS880-H (Aloe).  I'm interested in upgrading my processor and was looking in the Phenom II X 6 1100t.  As far as I know that I would have no problem to do so.  The problem is that now that the AMD FX processors have been introduced, it seems retailers are gradually the already and those who remain have seen an increase in the price that I am not very willing to pay.  I am now looking into the processor AMD FX 6100 (top six) which, like the 1100T, as short as 3.3 Ghz. What I want to know is whether this FX series processor is compatible with my motherboard?  I've done searches, it appears.  Moreover, if I wanted more speed, could not H-RS880-Μatx manage all the options processor 8 cores FX?  Any help in this matter would be greatly appreciated.  Thank you.

  It seems that the fx series is all AM3 +, and I believe the motherboard Μatx-RS880-H (Aloe) is only an AM3. Which would mean it is not compatible.

• Impossible to update the BIOS on my Satellite A660

  Hello, guys!
  When I try to update the BIOS on my laptop in version 2.3 (latest version 1.6) I get the message "install UEFI winflash 0.02:

  + The program will be closed! +
  + There is an error occurred, please check below Articles. +
  + The BIOS above 230 version. +
  + More than 20% of battery capacity. +
  + Is attached AC. +

  The conditions of the first and the last are rooms but the second is not because the battery is dead (always 0% charged). Is there another way to update the BIOS?
  Thank you!

  Post edited by: al_3

  No, there is no other update BIOS because victory BIOS update version is available on the Toshiba driver website.

  I guess you need good work and battery charge in order to update the BIOS.

  But why you want to update the BIOS? Is something wrong with the laptop?
  The update of the BIOS is a very serious update and must be done very carefully
  Incorrect procedure may damage the motherboard!

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• Question of updating the BIOS for Qosmio F50 - 10 k

  Hiya:

  + This Bios update adds functionality to your system. +
  + (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +
  "+ When the computer turns on, the BIOS is launched to perform various functions to start). +

  + For detailed updated information, please refer to Toshiba-setting to update BIOS Information +.

  + Toshiba - 2.00 - WIN32 Qosmio F50 +.

  It will work on toshiba F50 - 10 k, Windows xp, sp 3?

  [Notebook-> Qosmio-Qosmio series > F-> Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]

  Post edited by: kirekk

  Qosmio F50 - 10 k belongs to the series of PQF55E.
  If you want to update the BIOS, you will need to use the BIOS exactly for the F50 PQF55E series.

  The European driver Toshiba page provides BIOS for Vista 32-bit and 64-bit OS.
  But this does not mean that you cannot use the Win XP

  I think you can use the Win XP but the fact is that the BIOS has been optimized for Vista and not XP

  The BIOS update should work also on XP, but in some rare cases the update cannot be performed and in this case, you will need to the Toshiba preinstalled the operating system in order to update the BIOS

• update the BIOS does not have: do not meet the prerequisite code 9994/9996

  BIOS update failed: did not meet requirements code 9994/9996 / model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic version of the bios 5.38, published on 20/03/09. 4 GB of ram (3.5 usable) AMD semperon - 1300 socket am2 + name code sparta.  Update BIOS of motherboard M2N68 - verision 5.49 released on 24-08-09 (am trying to go to a concert of triple-core AMD phenom 8400 2.1 it is why I am updating the bios, when I put it I have nothing).

  Figure 1: Error Message

• Question about updating the BIOS for Qosmio G20

  I downloaded the updated the BIOS of my pc, not the Qosmio, the instructions say it will unpack into 3 files, one being a floppy disk installation. When I unzip on my desktop pc, it makes a file that s too big for a floppy and he won t unzip further because it locks up my pc.

  Is it safe to make it work on my desktop pc it can unzip then in the three files and this will affect my BIOS or y at - it somewhere that I can download the floppy part on its own to load on a floppy?

  Hello

  Just a question;
  You have downloaded the Qosmio G20 BIOS on the desktop computer, unpacked and now you want it please on the diskette in the floppy drive.
  Is this good?

  So now my suggestion;
  Firstly that the Qosmio G20 BIOS and other BIOS Toshiba cannot be updated using the floppy! This isn't traditional BIOS!
  The BIOS from the Toshiba page must be updated when the Windows operating system is running!

  By the way: you can unpack the BIOS on your desktop computer, but don t try to run all files, because the bad BIOS can damage the motherboard ROM module!

• Satellite A210 - 16G (PSAELE) - how to use 4 GB and update the BIOS?

  Hello! I hope someone can answer a few questions for me.

  First of all is: How can I turn on my laptop to use all the 4 GB of RAM? OS is Win Vista Ultimate 32-bit with Service Pack 2. Now Vista all show the 4 GB of RAM, but don't use it. I activated the EAP in Vista, but still nothing. As I saw, I need to turn it on too memory remapping in BIOS but there is no option (my BIOS is ver.1.70).

  The second question relates to the BIOS. Because my version is 1.70 and there are more recent version 2.00; I get benefits if I update to BIOS? Someone has updated to version 2.00? And there are more options in the BIOS after update to version 2.00 (for example the memory remapping or a similar option)?
  I'm a little afraid to update BIOS, because sometimes my Toshiba freezes, and I would not hang during the update of the BIOS.

  And the final question is there any changelog to the BIOS? So I can see what is added and changed, and what's new in the new version of the BIOS. Because I could not find anywhere.

  Thanks for the responses to come.

  Hello!

  (1) you can use the entire 4 GB of RAM on a 32 bit OS. It is a due limitation of 32-bit technology. Windows Vista with Service Pack 2 may recognize the full 4 GB of RAM but not use it, more than 3.2 g.
  Here you can find more information about this limitation:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  (2) about BIOS updated I can tell only must be made only if you have problems with the laptop. A BIOS update should never be done just for fun, because it of still a little risky. In the worst case, you can destroy the ROM module or complete motherboard.
  Update the BIOS doesn't normally contain new features or options. It s bug just setting. In addition it can t solve the problem with 4 GB of RAM and Vista 32 bit if you think that ;)
  If your laptop does not have 100% stable you shouldn't t update because it s too risky. Before the update, you should try to solve the problem of gel.

  (3) If a change log is available you can find it on the Toshiba site. If you can t find, there isn t available.
  That s all about this.

  I hope I could help a bit.

  Good bye

• Update the BIOS has no - no display on my Satellite A200

  Hello

  When I tried to do an update of the windows BIOS, windows stuck and need to restart, but when I restart I no the any all screen.
  I guess that my BIOS is damaged.

  I would try an update of the traditional BIOS, but there is no traditional update of Satellite A200.

  Any ideas?

  Thank you

  Orhan

  Hello

  Unfortunately, it seems that the windows version of the BIOS is available for this model of laptop.

  In any case, I wonder why you have updated the BIOS of your laptop. Many users of the forum mentioned that the update of the BIOS is risky!
  The bad BIOS or bad BIOS update procedure can damage the motherboard specifications ROM!

  Did you follow the directions of update of the BIOS that is available on the Toshiba page?
  Generally everyone should plant after that law updated the procedure

  You said stuck and need to restart windows
  Well I think that something was wrong during the update process and so the phone doesn't display anything!

  This doesn't sound good! In my opinion, you must contact the ASP in your country because after the wrong BIOS only laptop technician could save the unit!

  Good luck

• Update the BIOS for HP Pavilion M9400f

  PC desktop, HP Pavilion Elite 9400F

  Windows 7 64-bit.

  Error message: Incorrect for your system (253) Bios please contact support.

  I use the bios upgrade HP site says to download for my PC, but the upgrade works only with a card mother M2P61PM-HM.

  Mine has a motherboard M2n68-(NARRA3) and the latest bios for this motherboard does not support Windows 7 and is abandoned.

  My system black screen constantly when out of mode 'sleep' and upgrade the bios addresses that issue.

  Try to use the BIOS Nettle3 update on the card mother Narra3 will cause problems. Most of the time that BIOS HP update routines is written for a specific operating system and will not install on other operating systems.

  Make sure you use the update of the correct M2N68LA BIOS for your motherboard Narra3, several different versions of the M2N68LA were made (narrated, Narra3, etc.)

  Please put back the computer it's original Vista OS to install the M2N68LA (Narra3) update of the BIOS. After you install the update, you can return the system to Windows 7. Make it easy and not lose all personal data, disconnect your Windows 7 drive and a blank disc. Using the recovery DVD, install Vista. Update the BIOS. Disconnect the Vista disc, and then reconnect the player to Windows 7. You should be good to go.

• How can I update the Bios because of the question "plugged in, not load?

  I have a gateway computer, and all of a sudden I'm not into error on my charge battery.  I tried all the things people have mentioned in previous posts except to put updated my bios.  Gateway who told me to update them, but their steps did not make sense.  I downloaded the new software on a cd.  But from this point, that do I flash/update the bios?  I tried to start the computer with the disc, but it did not work.  Any help would be appreciated.

  I have three files

  BACK: Has Criskisk.zip, aceracdc.exe, phlash16, a rom and a wph file.

  Then I have a 32 Winflahs record and a record 64 winflash.  It looks like these have wflash mfc applications.

  So I think I have it all, just do not know what to click on and when.

  Hi ski2xtc,

  This would happen if the adapter is faulty or the charger on the motherboard component does not work.

  To update the BIOS to the latest version, you will need to contact the manufacturer of the laptop computer for more information.

  You can try to change the laptop battery and check if it charges properly.

  http://support.gateway.com/support/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updateing the BIOS on a R4

  I want to update my BIOS, I currently have the BIOS original version delivered AO3 installed when I bought the computer.  I want to upgrade to the latest version of the A11, I read so many horror stories about the things go wrong by updating the BIOS, such as bricking the motherboard and the command center does not work after and update. What is the best way to update, I read to update to version A05 firstly, I can't jump to A05 or I have to go to A04 first, then after the jump to A11 A05?

  My computer works fine now, I do it so I can update my video card, I'm not so sure that I have the courage to redo the BIOS, but I would of course like to upgrade the video card, so any advice, tips or tricks would be greatly appreciated

  Hi Nisei,

  Yes, please follow the exact order that I posted on my previous answer to Flash the Bios with the latest version. You can ignore what he says the performance of the A05 Bios from a bootable USB, you can download and run the executable for Windows. Let know us you need help.

• Impossible to update the bios

  I bought the laptop on ebay (the portable school was) battery does not charge but shows connected, I get the message that it is the result of the outdated bios (A00 updating is A06). I tried to update the bios, but the first problem was no image of the system.  I did it.  I did auspices try to update bios, this time bios tbe will not update because of the battery is not not charghed at 10%. I can not load the battery.

  Is it possible to update the bios, or should I get another battery?

  I got in touch with sales of battery problem before all this and got a new battery by recommendation of sellers. There no awareness of this problem, the battery WAS at 50% charged.  I have no problem with the purchase of another battery if there is no other way.

  Check if the power adapter is recognized by the system (F2 at startup).  If it is not, battery does not charge.

  If the adapter is not recognized, it is not a BIOS problem - try a new Dell OEM adapter first.  If this does not solve the problem, and the DC Jack is replaceable, replace the DC Jack in the system.  In the case of a model where the CC is not replaceable or replacement Plug does not solve the problem, the motherboard should be replaced.

• update the bios card mother MCP61PM-HM (nettle3) m9400f

  I want to update the bios on my 5.17 m9400f desktop pc to the latest version (5.29?).  The motherboard is MCP61PM-HM (Nettle3).

  When I go to the support page for the m9400f (here) , it shows an update of 5.29 bios for the motherboard2P61PM-HM M even if there is no indication that the m9400f never actually used a such m/b.  There is no updated BIOS shown for the MCP61PM-HM I.

  Naturally, I'm very concerned about try it to Flash the bios with the wrong firmware.  This could be catastrophic.

  Someone at - it the words of wisdom on how to proceed?

  Thank you very much.

  With the help of generous and helpful to sumsolstice, it was determined that the 5.29 bios update should work with my card mother MCP61PM-HM (nettle3).

  Friday night, I flashed the bios with update 5.29 (sp44500.exe) and, although it has less than 2 days, which seems to work very well.  I do not know if this bios update solved the problem of sleep/wake, I had.  I'll know more conclusive than the days and weeks go by.

  For those of you who might be comtemplating this update, I notice a slightly different sleep with the 5.29 sequence.  I have 2 HD discs and a DVD player in the pc m9400f.  With the 5.17 bios when pc went into sleep, all disks have been disabled relatively simultaneously.  With 5.29 bios, now the DVD player and the other HD drives are turned off as before, but the second disc of HD does not close until 5-10 seconds later (listen to the click of the heads HD parking).  It isn't really a problem, a bit of an oddity.  I do not know which of the 2 drives HD stopped last; I'm not curious enough to open the pc case to find out because it does not seem to affect anything either.

  A big thank you to all those who were interested in this forum announcement and helped to guide me through this: Big_Dave, Hanspuppa and especially sumsolstice.

  Jerry