Problem with composition

Similar Questions

• Fundamental problem with composition VisualLightBox. Arggh!

  OK so basically I can't slide in light to work independently composition table. I have a portfolio with many miniature images page. You click to open the light table with an enlarged image of the thumb. When I add text or images to the first slide, as it appears on every page! I have the normal jQuery languages but I didn't want the thumbnail to be a scaled-down image version full size in the slide viewer. I created an interesting set of jpg for thumbs and then imported the enlarged image on each page of the composition Viewer. When I add details and brief customer first it slide duplicates on all pages. Any ideas? Thanks in advance. I don't know that I'm missing something simple.

  OK it sorted. I had no active action when editing.

• Satellite P100-221: problem with driver battery composite microsoft

  Hello

  I have problem with my satellite p100-221! A few days ago I had problems with my audio driver (audio conexant high definition), after starting it was indicates that the pilot of his failed to initialize, I reinstaleed this driver several times and at last it was working OK, but I noticed that windows does not see the battery.

  The small cell in the status bar disappeared and I can not say for how long can I use laptop with battery. Laptop works as if it is connected to the AC. In the Device Manager appeared an exclamation on the battery composite microsoft.

  I tried to renew the drivers but nothing. I deleted combatt.sys and cmbatt.sys in windows\system32\drivers but they appear again. I started in safe mode deleted, but after normal start, they do not appear. I also deleted them in Device Manager, and after start-up, this device did not and do not ask me to install the drivers.

  What can I do?

  Hello

  I noticed that you did a lot of complex changes to your device. You deleted some files, update drivers, etc..
  I guess that your operating system has been enough installed and worked properly.
  Windows XP supports a system restore tool. This tool allows you to roll back the OS to the beginning.
  In my opinion, you should try to use this option. Maybe he'll bring your laptop at the time where everything worked correctly.

• Problem with the composition of the corporate directory / phone book (E.164)

  Hello

  I have a little problem with the composition of the cucm phonebook integrated telepresence system. I can search the telephone directory, and it displays the user. The format is E.164 number, but with spaces in the number of empty? And for me, it looks like telepresence system trys to deal WITH areas because if I compose without space market. So it seems it is not the phone book to a good number E.164 number.

  any ideas?

  Concerning

  Jason

  Hey Jason,

  Looks like it's still an open caveat on the current software for MX, EX, endpoints series E20 and C sq.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/software/TC5/Release_notes/tc_software_release_notes_tc5.PDF

  CSCtz87452:

  MX, EX, E20, C and SX Series endpoints cannot use directories CUCM with numbers, including spaces.

  Thank you, Adam

• Problems with Gmail in Firefox version 20.0.1.

  I never had no problem with Gmail before this version. Now when I want to create a new message window composition and the home page will turn into a blank white window. It is titled as if it were from the Inbox, but there are no links or words that appear in the window. I can not type in this window either. If I'm unable to send email from my office.

  Also, I can only read new messages. When I try to read older messages that I had saved for your information, I can longer open those.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of the entry of the history (history > view history or view > sidebar > history) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.

  You can't recover from this "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• reinstall iTunes error message "there is a problem with this windows package install." A program to complete this installation could not be run "."

  original title: problems with the installation!

  I'm trying to reinstall iTunes I have experienced problems with it. However, when I try to install an error pops up saying something along the lines of "there is a problem with this windows package install." A program to complete this installation could not be run "." I have no idea why this happens and no idea how to solve this problem.

  Any help would be great.

  Error 9010

  To disable the Desktop Window Manager by process - response: this is a normal message when a process requires exclusive access to the desktop (e.g. use DirectDraw /OpenGl in exclusive mode) or just likes to turn off the Messenger of the window of the Office for some reason any. It is not an error.

  Error 9013

  Press Windows Flag + R

  Type %windir%\system32\SystemPropertiesAdvanced.exe
  Press Ok

  Under performance, click the Settngs

  Check enable the Composition of the Bureau

  Click on apply, Ok

  Error 1002 - I need the specific message

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735604 (WS.10) .aspx

  Error 1001-

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735588 (WS.10) .aspx

  Reset the Web browser

  Tools > Internet Options > Advanced tab

  Click on the Reset button

  Check delete all personal settings

  Click on the Reset button

  Click Ok

  Close the window

  Restart the computer for the changes to take effect

  Retry Installation

  Error 100 - support contact Apple

  http://TechNet.Microsoft.com/en-us/library/cc774985 (WS.10) .aspx

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Logitech G19S problems with Windows 8 Pro x 64

  Hi all

  I have been a customer of Logitech for 18 years now and I've probably had more Logitech material than cooked dinners. And my latest purchase is the successor the Logitech G19 with the G19S awaited. Although it comes with a crazy price tag. It also comes with a nightmare experience, trying to get this device works on Windows 8 even if e t product has been certified to work with Windows 8, it caused an absolute headache get this 'thing' to work.

  For an eye untrained a novice, one would think that the keyboard has been installed twice. When actually the keyboard has not been installed twice, what it is for the keyboard, the other is for the USB ports and LCD for the keyboard. Although, to confuse the issue even worse. Windows sets the icon as two keyboard, when in fact it should have been G19 Gaming Keyboard then G19 Gaming Keyboard/LCD/USB because it does that confuse the issue. Examine the properties of the material, then you will have an understanding why there are two icons. My argument is that the description should be separated so do not cause confusion.

  +------------------------------------------------------------------------------------------------------------+

  | Keyboard game G19s

  | Device HID keyboard- keyboards

  | Human interface for the device of control of compatible consumer-HID Human Interface Devices

  | HID-compliant device - Human Interface Devices

  | Composite USB device - Bus USB controllers

  | Device-USB Human Interface devices

  | Device-USB Human Interface devices

  +------------------------------------------------------------------------------------------------------------+

  | Function USB Host Controller device

  | Status of the device: this device does not work correctly.

  +------------------------------------------------------------------------------------------------------------+

  +------------------------------------------------------------------------------------------------------------+

  | Keyboard game G19S

  | Device keyboard HID- keyboards

  | HID-compliant device - Human Interface Devices

  | Logitech G19 LCD - Logitech LCD

  | Composite USB device - Universal Serial bus controllers

  | USB Device input - Human Interface Devices

  +------------------------------------------------------------------------------------------------------------+

  | Function USB Host Controller device

  | Status of the device: this device does not work correctly.

  +------------------------------------------------------------------------------------------------------------+

  G19S keyboard (MAX 500mA USB Ports) which, when coupled with the USB receiver to the mouse G700S, looks like ports are overloaded because when you start Windows 8 sometimes with blue Windows Logo (no circle of spinning at the bottom of the page) I left to see if Windows will load , but noting. Unplug the USB cable from the port, and then restart Windows 8 with the USB cable removed it to load very well. reattach the USB cable from the keyboard to the back of your PC. Everything is fine until you turn on your PC again and it comes up with the same problem. What I've discovered, by removing the rear receiver is Receiver USB port to the front USB ports without the port of a USB docking station and just the small receiver of mooring. There is no interference, not crashing or the keyboard causing Windows crash when loading for the first time.

  I need to run tests more today and see if my theory is correct. But it seems that for the moment he is stable and I didn't have problems with the keyboard. I restarted the PC to see if there is a conflict at the initial boot to the top of the PC, and that's fine. It seems there is a conflict between the receiver for the mouse, then USB cable for the keyboard. It's in the same area that the keyboard, it causes Windows 8 to be unstable. If you move it from your PC. A small receiver coming out of the front of your PC is not intrusive. It is small and compact, so it doesn't show that much.

  The research that I did last night and this morning, it seems he had a similar problem with the predecessor the G19, I read articles and community forums with similar problems with Intel and AMD systems.

  I finally cracked and you are never in 1 million years think that would have been the likely cause of the problem. The G19S and G700S connected to the proximity to the other, caused the USB Bus overload. Me personally I don't see what is the cause... but, it works and it's stable and that's all that matters at the end of the day.

  The signal of the receiver G700S is 1000 Hz, which is much stronger than a wireless mouse normal that there are any lag or drop signal. Although, I found; with the connected connected to the USB docking station nearby renovator or next to each other caused the USB Bus overload. I moved the no intrusive receiver to the USB Port on the front of my rig and it is now very stable and load every time. It's the most bizarre experience I've ever lived, and now I know with certainty that the plausible cause of the problem was if anyone else has experienced the same problem as mine. Just remove the USB cradle for the receiver and plug the receiver into the front USB port of your platform.
  What a nightmare of an experience I will never forget. That you you prevented me troubleshooting for a whole day of Logitech.

• Problems with dynamic links between Premiere Pro and After Effects

  Hello

  dynamic binding (insertion of After Effects compositions on a Premiere Pro schedule) rarely worked properly since it was introduced. Problems vary (for example "media disconnected" made plates, old versions of comps rendered).

  What's worse, is that you can never tell what will be ultimately made out of Premiere Pro. Thus, a typical professional workflow to several projects together to finish during the day and batch overnight rendering can cause a catastrophe.

  Of course, the option is to not use dynamic link. Which makes then less competitive whole adobe.

  This subject has been widely discussed for years has been a dynamic links. I'm not the only one having this problem, and the problem is far from new.

  My only question is:

  Adobe: have you ever fix dynamic links?

  I don't really understand how you focus on software development in your company. The vast majority of the features of CC is little or not useful. The most important thing in a professional environment is consistent and reliable - performance can you please focus on that?

  I'm inspired to write this post because I just arrived in my edit at 07:00 only to find that my night makes is the wrong versions. All bed very well in the body and AE, damage the final rendering off Media Encoder used an older version of one of my compositions, and that I have nothing to send to my client.

  Janne

  Title edited by Kevin Monahan.

  Management of files Adobe seems to rely on the names and the last path of known files. Body loses links Dynamics (and other files) with frightening regularity in a situation where nothing has changed in the hierarchy of files, the files.

  16, when a hard disk of 8 GB was a huge drive, Pro Tools has been littering files on several disks because, as was the creation of audio files in real time, she had to. Digidesign introduced into a system which incorporated a unique program generated number in each file. Since that day I have never had a problem with lost files or correlate. I can move them anywhere, on any system and any PT session concludes that they are with total reliability - and we are talking about a lot of projects with thousands of files, through several studios. If you are looking for files, you can choose to use the identification number, the name of the file, the length of the file, or any combination of these. Which allows for the substitution of file.

  Until Adobe address this problem with a solution similar to that of Pro Tools, we'll be constantly beset by problems.

• having problems with graphics acceleration in lightroom with card amd 2015 running drivers latest

  having problems with graphics acceleration in lightroom with card amd 2015 running latest drivers. It crashes every time that you do something to make anything with acceleration for example. develop module or turn it off

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 7 Ultimate Edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 6

  Processor speed: 2.8 GHz

  Built-in memory: 16383,3 MB

  Real memory for Lightroom: 16383,3 MB

  Real memory used by Lightroom: 841,5 MB (5.1%)

  Virtual memory used by Lightroom: 853,0 MB

  Memory cache size: 261,4 MB

  Maximum thread count used by Camera Raw: 6

  Camera Raw SIMD optimization: SSE2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1600 x 900, 2) 1600 x 900

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 6800 Series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13397 context 15.200.1046.0 the base profile

  Renderer: AMD Radeon HD 6800 Series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\hdd\photos\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\nathan\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) irista

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 6738

  Subsystem: e178174b

  Revision: 0

  Video memory: 1011

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Corsair Gaming H1500 helmet)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  You can disable the GPU manually by changing the preferences file to LR with a text editor such as notepad and change the line useAutoBahn = true to useAutoBahn = false.  You do not want to do with LR does not.

  On Windows, the LR file is located here:

  C:\Users\- yourusername -\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs

  You could make a backup copy of a file agprefs on your desktop, firstly, in the case where mess you something.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• Mobile site, not scroll with composition of widget

  Since I use Muse 2015, whenever I exported a mobile Web site that contains a composition of widget (in this case, it is a testimony of the slider), when the mobile page wants the cursor (which fills the mobile screen) you can not scroll. It doesn't allow me to scroll vertically if I touch the widget, if I touch any part that is not the widget (if necessary?). The biggest problem is when the cursor is on the screen, I can't scroll upwards or downwards to get the cursor off the screen and I'm stuck. I tried to put a transparent rectangle on it, thinking that it would be scrollable, but it did not work.

  Does anyone know a fix? Or if it's a bug of Muse 2015 or I do something wrong? I saw another person is having the same problem:problem with the widget of the Composition and the scroll of the page

  Problem has been solved...

  Adobe Co.. you guys should thank you me...

  1. place a 'Compositions' library of Muse.

  2. place this 'Compositions' in your background layer (its depends on the item you want on top)

  3. Select the "Compositions" and turn on the PIN to the sensitive page (Note: reactive PIN is essential,! no static PIN!)

  4 If you use "hide all initially" and "Trigger on Top" then you should select only trigger the layer panel and PIN the statically in the Page (Note:!) Only for relaxation, not to pin the area target!)   This way your trigger will stick to the page and only the target will have function of scrolling to it container.

  And that of it, notes:

  Reply to this message if you want more help.

  Thank you

  K. Michaud

• Problems with render (Prem 11 items)

  When I first import a clip in my project, the video quality is very good, but after I have make, he out craps, gets all grainy (the irony). How can I solve this problem?

  Sophie

  Part 1.

  Your Untitled.mp4 (turned)

  = AVCHD video compression

  Compression audio = AAC stereo

  Frame rate = 60 progressive frames per second

  File extension = .mp4

  Nominal value, it would seem that the project preset should be

  NTSC

  AVCHD

  AVCHD Lite 720 p 60

  In the first 11 elements, the program takes control over predefined setting the project given of some composite properties from the first video file dragged to the timeline. Sometimes it does, sometimes it doesn't. In no situation, it doesn't give you the project closet preset for you, but rather by default, its default value

  NTSC

  AVCHD

  Full HD 1080i30

  that does not correspond to properties of your video, including an interlaced 30 rate per second of the image instead of a 60 progressive frames per second an and including the size of the image of 1920 x 1080 instead of the size of your video 1280 x 720.  Why? It seems to be failing because it is having a problem with the frame rate. He is looking for a 59.94 to profile it and find 60 frames per second for your video.

  When boil us all this down to a few words. In this case, you must assign the project preset manually.

  First Elements ATR troubleshooting: PE11: accuracy of the project auto Preset setting (new project dialog box)

  When you do, you should be able to import your video into the project NTSC/AVCHD/AVCHD LITE 720 p 60 without the orange line on the content of the timeline despite this company of 59.94/60.

  Part 2

  When I import your Untitled.mp4 in a first elements 11 on Windows 7 64-bit project manually the value

  NTSC

  AVCHD

  AVCHD LITE 720 p 60

  the video quality seems good reading in the monitor of the area to change. And it doesn't have the ability to make this specific because the program its color line on the line of the capacity indicator tells me that I have the best possible overview of content (to get a better view). And, I found good quality reading display full screen also.

  Your Untitled.mp4 has a video bit rate (variable bitrate) of 5973 Kbps (kilobits per second in 5.973 Mbps. The size of the file is 41.0 MB).

  If you export your video Untitled.mp4

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 HD720p60

  You should have a file whose properties are comparable to the source. The reading of this export of AVCHD.mp4 in the drive on your computer should be good.

  If for export file size considerations are not a problem here, you can increase the export export video bitrate settings tab button/video forward of the preset looking for a superior quality export.

  But, when all was said and done, I couldn't see not "grainy" before or after the reading of the Untitled.mp4 in the monitor area Edit. Export of this H.264.mp4 at no time looked grainy on playback in QuickTime player.

  Please review and consider. The double project preset controls, in particular the "Force selected setting on this project' checkbox in the dialog box new project when you perform the manual setting of the preset project. Please let me know what additional tests you need for your samples.

  Looking forward to your results.

  Thank you.

  RTA