Problem with connecting to Vcenter, with vSphere ESX

Similar Questions

• I can't connect to Vcenter using vsphere client

  I installed vCenter 6.0 and vsphere client 6.0. I can connect to the web client, but when I am connected to vCenter using vsphere client I got error.

  

  In vsphere version 5.5 I can connect to vCenter using vsphere client 5.5.

  I can't find any information on this subject on vmware.com.

  Do vsphere 6.0 support connecting to vCenter using vsphere client?

  I guess you are using Vsphere Client beta built which has only the features of client enabled host.

  Try GA build Client to connect to vCenter. However, the latest vsphere 5.1 leave are available only in the web client.

• Problems with vSphere replication

  Hello

  Ive been with vSphere for about a week now and I'm faced with the logic of the replication tool V.

  I've been creeping (don't not trolling) forums and web trying to find a good source that can explain this plugin which is visible in my Web client installation method. I also license MORE.

  This is probably the only one I can find so far: -.

  http://vknowledge.NET/2012/09/12/vSphere-5-1-getting-started-with-vSphere-replication-5-1/

  What I want to achieve is to reproduce all the virtual machines on one of my servers to another identical server of the G8.

  Two questions if you could help please?

  1. someone any good tutorials on it.

  2. I went and made a schoolboy error, I think, I gave the vSphere replicaiton appliance the same IP address as my ESXi host. (This is how I am wrong) and now I can not access the host because of this machine. Can someone tell me how I can reconnect to this machine without a comprehensive resettlement and reconstruction of 50 guests or more.

  Thanks in advance if you can help.

  It is difficult to explain the internel operation of the SRM, vsphere replication etc... in this little time...

  the basics are simple... How it works... ?

  There are 2 types of replication replication 1-vsphere 2-array based replication

  vpshere replication is a basic agent - it's a VR agent will be there inside the esxi hosts this monitor of the agent running the virtual machine inside this host and replicates data binding if WAN remote site.

  the main PR\648606FR here is - once the replication of the entire virtual machine that's happened, after that only the blocks changed the VMFS will be launched on the... which is the only the modified virtual machine data will be replicated. It's called CBT, VR agent follows the blocks inside the VMFS, if any block of virtual machine data is changed it will get replicated.

  dosent it replication vsphere require no support from the underlying storage Bay...

  the second is the table of a function... where the entire replication is managed by the matrix of storage... and it works with the MRS.

  See the post for more details... http://communities.VMware.com/message/2175005#2175005

  now to your questions.

  1. someone any good tutorials on it. -the best method is to read the official docs...

  http://www.VMware.com/files/PDF/Techpaper/introduction-to-vSphere-replication.PDF

  http://blogs.VMware.com/vSphere/2012/08/SRM-5-1-and-vSphere-replication-as-a-standalone-feature.html

  http://www.yellow-bricks.com/2012/09/17/back-to-basics-install-configure-and-use-vSphere-replication/

  http://thesaffageek.co.UK/2012/08/27/vSphere-5-1-announced-with-enhanced-vSphere-replication/

  2. I went and made a schoolboy error, I think, I gave the vSphere replicaiton appliance the same IP address as my ESXi host. (This is how I am wrong) and now I can not access the host because of this machine. Can someone tell me how I can reconnect to this machine without a comprehensive resettlement and reconstruction of 50 guests or more.

  If the esx host is clustered, using the ILO and esxi shell put the host in maintenance... mode and reset the esxi

  To switch to maintenance mode, run the following command

  VMware-vim-cmd/hostsvc/maintenance_mode_enter

  and

  To exit the maintenance mode, run the following command

  VMware-vim-cmd/hostsvc/maintenance_mode_exit

  then restart the esxi host and give IP, or power off of the VR device and give IP

• Problem with vSphere license

  I am trying to add a license to a free vSphere installation 5.1 and I see this error message. My Dell R710 server has 72G RAM, 2 x 1 TB and 2 x 6-Core 5660 2.80 Hz CPU.

  I have attached the log. Any help will be appreciated!

  Thank you

  JM

  With vSphere 5.0, VMware is launching a policy which limited the maximum physical memory on a host or a cluster, according to licenses "vRAM". For the free hypervisor maximum was 32GB. This political vRam has been deleted again with vSphere 5.5 (see for example KB VMware: VMware vSphere 5.5 license and/or Update vRAM political). I'm not sure if policy has also been removed from the earlier 5.x version with the latest patches!

  André

• Unable to connect the client via vsphere ESX host

  Dear team,

  Once I tried to connect to client host via vsphere ESX I m getting following error.

  

  VCenter version: 4.1.0 345043

  vSphere client: 4.1.0 345043

  ESX Version: 4.1.0 721871

  You help me on the same request.

  concerning

  Mr. VMware

  It is usually advisable, but not an obligation, to have the build of your version of vCenter client correspondence.

  You can see the Interopabilty matrix for supported configurations

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• Connection to the client with VSphere ESX host makes me download the old version of the VSphere client

  Welcome the OS Version: 5.1.0 - 2013

  Question: When I connect to my guests with the VSphere client it forces me to re-download the VSphere client. As you can see from the attached PDF there pretty much all installed versions. Yet, he's trying to go to vsphereclient.vmware.com to try to download again (which cannot because it is on a closed network). It is meaningless to me, as you can see I have all versions of the installed client. My boss who also has the same installed versions can connect. Actually, I installed 5.1 client so that should be enough. VSphere shows the host to 5.1.0 - 2013.

  Why is this not with my Vsphere client?

  Looks like your Client vSphere is version 5.1.0b (source: Match VMware vCenter 5.1 component Versions |) Virten.NET) and your ESXi host is version 5.1 Patch 4 (KB VMware: Products VMware correlating build numbers to update level )

  You need download the vSphere Client 5.1 update 2 version to directly connect to this host.

• Problems with vSphere 6.0 and IIS 8.5

  Hi all

  
  We have a very rare problem currently with IIS on a new version of vSphere 6.0.  We run 3 host ESX enterprise in a standard cluster with a standalone VCSA.

  The problems that we know are response times in IIS.  We lack an asp.net web application using ado.net to extract simple data sets in a cluster SQL from 2012.  The web server running Windows Server R2 with IIS 8.5.9600.16384 2012.  It comes to virtualized.  Our SQL servers are also running on Windows Server 2012 R2, but this is a physical cluster.  All components are updated running the latest windows patches, fixes vmware, etc.

  We have tried to limit the problem using wireshark, we noticed that speeds improved dramatically when running wireshark.  We have finally pinned it down to the NETWORK card is in promiscuous mode - mode "Promiscuous", web response times app are sub 100ms, and when we disable the promiscuous mode, response time pop up to 4 + seconds.

  I found a few articles that might put this question of vSphere RARP and NLB in unicast mode, but we do not use NLB on any of these servers, and many of our tests were performed on servers IIS "standalone".

  Someone encountered this problem before, and anyone has pointers?

  Thank you

  It looks exactly like the problem that is described in this thread:

  vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  You also use the vmxnet3 vNIC?

  If yes are trying one of these workarounds mentioned in the other thread (I'd go with LRO to start, do not forget to restart):

  E1000E use instead of vmxnext3

  Use jumbo frames (not really good for us but can be one good option for others...)

  Disable the LRO on a VMXNET3: enable or disable LRO on VMXNET3 adapter on a Windows Virtual Machine

  Turn on LRO overall on a Windows Virtual Machine

• Problems with vSphere install

  VM experts! : P

  I am very new to VM and unfortunately am responsible for getting ESX4 vSphere4 running on a slide in our chassis HP C3000. So, I installed vSphere4 and encountered some difficulties. First of all, there are four available within the chassis NIC (2 built-in, 2 via a mezzanine card)

  I have configured the Service Console with an IP address in the subnet that the NETWORK card is attached to (10.100.1.180) and the strange thing is that from the ESX console I ping some IP addresses on the same subnet as 10.100.1.105 we are going to say, but not 10.100.1.50. ICMP is enabled on devices, so it is not a firewall simply disabling echo answers.

  Including a screen capture of the screen of networking within vSphere for reference...

  I think that it probably has to do with the configuration of your circuit.  I use Virtual Connect modules, but if I read right then GbE2c modules are leaving entire switches.  In this case, I'm guessing that you have shared resources on GbE2c ports modules.  If Yes, then you MUST use IP balancing hash.  It is not intuitive, but here the rule of load balancing:

  If the switch can use any port in the trunk to return data to the virtual computer, you MUST set the hash IP load balancer.

  If the switch will not only associate one active port in the trunk with the MAC address of the computer virtual both (based on the configuration of your switch load balancing), then you SHOULD NOT Load Balancing IP hash value.

  So, try setting the hash IP balancing and let me know.

  JP

• Foglight for virtualization 7.0 Standard Edition Compatiibility problems with vSphere 5.5

  Hello

  I couldn't understand how just after to the Foglight for virtualization forum, so I apologize for this post being in the wrong place.

  I have the Foglight 7.0 Standard edition and I'm unable to see virtual machines on the hosts of a new vCenter Instance I added to Foglight.

  I have enough licenses and the hosts appear in the inventory, but if you hover over one of the new hosts attribute 'State' reads "Not responding" and appear any of the virtual machines in the cluster.

  Any ideas as to what could go wrong or what I would have been able to hurt?

  Thanks in advance.

  -Richie

  Hello Richie,

  Sorry for the late reply to this post.  It was the first time I saw it.

  The problem you describe would require a deeper look.  If you haven't done so already, please open an SR, and we can help you with this problem.

  Thank you

  Bill

• Problem with vSphere™ SDK for Perl instead of VI Perl Toolkit 1.6

  We are running VI Perl Toolkit 1.6 on SLES 10 SP1 64-bit.  When I run a test query using 1.6 I get the expected result.  When I uninstall 1.6 and install vSphere SDK for Perl and run the same query, I get this response:

  Can't load ' / usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/auto/XML/LibXML/Common/Common.so' for module XML::LibXML:Common: /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/auto/XML/LibXML/Common/Common.so: evil class ELF: ELFCLASS32 at line 230 of usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/DynaLoader.pm.

  /usr/lib/Perl5/5.8.8/x86_64-Linux-thread-multi/XML/libxml.pm line 12

  Compilation failed in require /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/XML/LibXML.pm line 12.

  BEGIN failed--compilation abandoned /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/XML/LibXML.pm line 12.

  Compilation failed demand to line 11 of usr/lib/perl5/5.8.8/VMware/VICommon.pm.

  BEGIN failed--compilation interrupted on line 11 of usr/lib/perl5/5.8.8/VMware/VICommon.pm.

  Compilation failed in require on line 15 of the usr/lib/perl5/5.8.8/VMware/VIRuntime.pm.

  Compilation failed demand to line 11 of usr/lib/vmware-vcli/apps/performance/viperformance.pl.

  BEGIN failed--compilation interrupted on line 11 of usr/lib/vmware-vcli/apps/performance/viperformance.pl.

  I have installed a perl prerequisite modules and RPM.  Any ideas?

  Looks like it is a shared library for 32 bit, not 64 (despite the name).

  I would try reinstalling LibXML with CPAN.

• Problem with vSphere

  Hello everyone

  I have a 2003 Server virtualized. mounts on vSphere ESXi 5.0.0

  I moved a drive to a virtual machine (so a hard) on a free data store: http://oi62.Tinypic.com/swelaa.jpg

  the problem is that the data store 1 (up arrow) is empty, when in fact there are 880 GB of hard (arrow in the middle).

  the same way I can't enlarge the hard content in the data store that has emerged at the same time: http://oi58.Tinypic.com/2yyd16p.jpg

  the maximum capacity in the red box was the same even before the transfer.

  What can I do?

  Please select the host in the vSphere Client and go to 'Storage' in the 'Configuration' tab select each of data warehouses, and click the "Refresh" link in the upper right to see if that changes anything.

  André

• Problems with vSphere 4.1 u1

  We recently put the 4.1 vSphere u1 patch and it seems that the script is having a hard time getting all the stats in our VMware environment. I run the script by using the credentials that have administrator rights, so he should have access to see everything. Yet when I run the report I only end up seeing the licenses, features, permissions, sessions, plugins and settings of VPX. (ie: everything on the first two tabs of the report.) I don't see anything for 3rd party apps tabs, cluster, host or virtual machines.

  For my versions:

  $./vmwarevSphereHealthCheck.pl--version

  vSphere SDK for Perl version: 4.1
  'VmwarevSphereHealthCheck.pl' script version: 4.1.9

  I have also re-uploaded the script this morning to ensure that I had later and was always a problem.

  Any idea of what this could be the cause?

  If it's not too much to ask, would it be possible to remove this empty cluster at the moment? I've tested w/empty code clusters, so it should not affect something but just trying to figure out what could be the cause of the problem.

• Problem with vSphere HA (vSphere HA Agent status electoral or inaccessible)

  We have 8 cluster nodes (5.5 Esxi)

  After the reboot of the switch works vMotion.

  And status of the HA agent changed his election or inaccessible (except for a single node, which has the status of agent HA a mask).

  Tried to disable and reactivate XP on a cluster. Tried to remove a node from the cluster and enter it again.

  What could be the problem?

  Contributed to the complete elimination of the configuration of the network for 4 nodes. And reconnect them to the cluster.

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• Problem with Vmware Ha cluster

  Good dekdak all

  I have a problem with vsphere 4.

  Today, I have to change the ip of the host 3 addreeses and a virtual Center.

  I do these things with your help like that, connect on VC disconnect all hosts and remove.

  Vcenter stopover services change beginning vcenter intellectual property services.

  Change the Ip addresses of the hosts, but now I get this error when I try to connect to the host to vcenter.

  Unable to connect ha agent on this host,.

  Please help me because Icannot create the cluster now, I don't know why

  Hi Patrizio,.

  Make sure your vCenter and all ESXs records are updated in your DNS infrastructure (or files hosts...).

  Good luck.

  Concerning

  Franck