Problem with vSphere
Hello everyone
I have a 2003 Server virtualized. mounts on vSphere ESXi 5.0.0
I moved a drive to a virtual machine (so a hard) on a free data store: http://oi62.Tinypic.com/swelaa.jpg
the problem is that the data store 1 (up arrow) is empty, when in fact there are 880 GB of hard (arrow in the middle).
the same way I can't enlarge the hard content in the data store that has emerged at the same time: http://oi58.Tinypic.com/2yyd16p.jpg
the maximum capacity in the red box was the same even before the transfer.
What can I do?
Please select the host in the vSphere Client and go to 'Storage' in the 'Configuration' tab select each of data warehouses, and click the "Refresh" link in the upper right to see if that changes anything.
André
Tags: VMware
Similar Questions
-
I am trying to add a license to a free vSphere installation 5.1 and I see this error message. My Dell R710 server has 72G RAM, 2 x 1 TB and 2 x 6-Core 5660 2.80 Hz CPU.
I have attached the log. Any help will be appreciated!
Thank you
JM
With vSphere 5.0, VMware is launching a policy which limited the maximum physical memory on a host or a cluster, according to licenses "vRAM". For the free hypervisor maximum was 32GB. This political vRam has been deleted again with vSphere 5.5 (see for example KB VMware: VMware vSphere 5.5 license and/or Update vRAM political). I'm not sure if policy has also been removed from the earlier 5.x version with the latest patches!
André
-
Problems with vSphere replication
Hello
Ive been with vSphere for about a week now and I'm faced with the logic of the replication tool V.
I've been creeping (don't not trolling) forums and web trying to find a good source that can explain this plugin which is visible in my Web client installation method. I also license MORE.
This is probably the only one I can find so far: -.
http://vknowledge.NET/2012/09/12/vSphere-5-1-getting-started-with-vSphere-replication-5-1/
What I want to achieve is to reproduce all the virtual machines on one of my servers to another identical server of the G8.
Two questions if you could help please?
1. someone any good tutorials on it.
2. I went and made a schoolboy error, I think, I gave the vSphere replicaiton appliance the same IP address as my ESXi host. (This is how I am wrong) and now I can not access the host because of this machine. Can someone tell me how I can reconnect to this machine without a comprehensive resettlement and reconstruction of 50 guests or more.
Thanks in advance if you can help.
It is difficult to explain the internel operation of the SRM, vsphere replication etc... in this little time...
the basics are simple... How it works... ?
There are 2 types of replication replication 1-vsphere 2-array based replication
vpshere replication is a basic agent - it's a VR agent will be there inside the esxi hosts this monitor of the agent running the virtual machine inside this host and replicates data binding if WAN remote site.
the main PR\648606FR here is - once the replication of the entire virtual machine that's happened, after that only the blocks changed the VMFS will be launched on the... which is the only the modified virtual machine data will be replicated. It's called CBT, VR agent follows the blocks inside the VMFS, if any block of virtual machine data is changed it will get replicated.
dosent it replication vsphere require no support from the underlying storage Bay...
the second is the table of a function... where the entire replication is managed by the matrix of storage... and it works with the MRS.
See the post for more details... http://communities.VMware.com/message/2175005#2175005
now to your questions.
1. someone any good tutorials on it. -the best method is to read the official docs...
http://www.VMware.com/files/PDF/Techpaper/introduction-to-vSphere-replication.PDF
http://blogs.VMware.com/vSphere/2012/08/SRM-5-1-and-vSphere-replication-as-a-standalone-feature.html
http://thesaffageek.co.UK/2012/08/27/vSphere-5-1-announced-with-enhanced-vSphere-replication/
2. I went and made a schoolboy error, I think, I gave the vSphere replicaiton appliance the same IP address as my ESXi host. (This is how I am wrong) and now I can not access the host because of this machine. Can someone tell me how I can reconnect to this machine without a comprehensive resettlement and reconstruction of 50 guests or more.
If the esx host is clustered, using the ILO and esxi shell put the host in maintenance... mode and reset the esxi
To switch to maintenance mode, run the following command
VMware-vim-cmd/hostsvc/maintenance_mode_enter
and
To exit the maintenance mode, run the following command
VMware-vim-cmd/hostsvc/maintenance_mode_exit
then restart the esxi host and give IP, or power off of the VR device and give IP
-
Problems with vSphere 6.0 and IIS 8.5
Hi all
We have a very rare problem currently with IIS on a new version of vSphere 6.0. We run 3 host ESX enterprise in a standard cluster with a standalone VCSA.The problems that we know are response times in IIS. We lack an asp.net web application using ado.net to extract simple data sets in a cluster SQL from 2012. The web server running Windows Server R2 with IIS 8.5.9600.16384 2012. It comes to virtualized. Our SQL servers are also running on Windows Server 2012 R2, but this is a physical cluster. All components are updated running the latest windows patches, fixes vmware, etc.
We have tried to limit the problem using wireshark, we noticed that speeds improved dramatically when running wireshark. We have finally pinned it down to the NETWORK card is in promiscuous mode - mode "Promiscuous", web response times app are sub 100ms, and when we disable the promiscuous mode, response time pop up to 4 + seconds.
I found a few articles that might put this question of vSphere RARP and NLB in unicast mode, but we do not use NLB on any of these servers, and many of our tests were performed on servers IIS "standalone".
Someone encountered this problem before, and anyone has pointers?
Thank you
It looks exactly like the problem that is described in this thread:
vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server
You also use the vmxnet3 vNIC?
If yes are trying one of these workarounds mentioned in the other thread (I'd go with LRO to start, do not forget to restart):
E1000E use instead of vmxnext3
Use jumbo frames (not really good for us but can be one good option for others...)
Disable the LRO on a VMXNET3: enable or disable LRO on VMXNET3 adapter on a Windows Virtual Machine
-
Hello
I couldn't understand how just after to the Foglight for virtualization forum, so I apologize for this post being in the wrong place.
I have the Foglight 7.0 Standard edition and I'm unable to see virtual machines on the hosts of a new vCenter Instance I added to Foglight.
I have enough licenses and the hosts appear in the inventory, but if you hover over one of the new hosts attribute 'State' reads "Not responding" and appear any of the virtual machines in the cluster.
Any ideas as to what could go wrong or what I would have been able to hurt?
Thanks in advance.
-Richie
Hello Richie,
Sorry for the late reply to this post. It was the first time I saw it.
The problem you describe would require a deeper look. If you haven't done so already, please open an SR, and we can help you with this problem.
Thank you
Bill
-
Problems with vSphere 4.1 u1
We recently put the 4.1 vSphere u1 patch and it seems that the script is having a hard time getting all the stats in our VMware environment. I run the script by using the credentials that have administrator rights, so he should have access to see everything. Yet when I run the report I only end up seeing the licenses, features, permissions, sessions, plugins and settings of VPX. (ie: everything on the first two tabs of the report.) I don't see anything for 3rd party apps tabs, cluster, host or virtual machines.
For my versions:
$./vmwarevSphereHealthCheck.pl--version
vSphere SDK for Perl version: 4.1'VmwarevSphereHealthCheck.pl' script version: 4.1.9I have also re-uploaded the script this morning to ensure that I had later and was always a problem.
Any idea of what this could be the cause?
If it's not too much to ask, would it be possible to remove this empty cluster at the moment? I've tested w/empty code clusters, so it should not affect something but just trying to figure out what could be the cause of the problem.
-
VM experts! : P
I am very new to VM and unfortunately am responsible for getting ESX4 vSphere4 running on a slide in our chassis HP C3000. So, I installed vSphere4 and encountered some difficulties. First of all, there are four available within the chassis NIC (2 built-in, 2 via a mezzanine card)
I have configured the Service Console with an IP address in the subnet that the NETWORK card is attached to (10.100.1.180) and the strange thing is that from the ESX console I ping some IP addresses on the same subnet as 10.100.1.105 we are going to say, but not 10.100.1.50. ICMP is enabled on devices, so it is not a firewall simply disabling echo answers.
Including a screen capture of the screen of networking within vSphere for reference...
I think that it probably has to do with the configuration of your circuit. I use Virtual Connect modules, but if I read right then GbE2c modules are leaving entire switches. In this case, I'm guessing that you have shared resources on GbE2c ports modules. If Yes, then you MUST use IP balancing hash. It is not intuitive, but here the rule of load balancing:
If the switch can use any port in the trunk to return data to the virtual computer, you MUST set the hash IP load balancer.
If the switch will not only associate one active port in the trunk with the MAC address of the computer virtual both (based on the configuration of your switch load balancing), then you SHOULD NOT Load Balancing IP hash value.
So, try setting the hash IP balancing and let me know.
JP
-
Problem with vSphere™ SDK for Perl instead of VI Perl Toolkit 1.6
We are running VI Perl Toolkit 1.6 on SLES 10 SP1 64-bit. When I run a test query using 1.6 I get the expected result. When I uninstall 1.6 and install vSphere SDK for Perl and run the same query, I get this response:
Can't load ' / usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/auto/XML/LibXML/Common/Common.so' for module XML::LibXML:Common: /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/auto/XML/LibXML/Common/Common.so: evil class ELF: ELFCLASS32 at line 230 of usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/DynaLoader.pm.
/usr/lib/Perl5/5.8.8/x86_64-Linux-thread-multi/XML/libxml.pm line 12
Compilation failed in require /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/XML/LibXML.pm line 12.
BEGIN failed--compilation abandoned /usr/lib/perl5/5.8.8/x86_64-linux-thread-multi/XML/LibXML.pm line 12.
Compilation failed demand to line 11 of usr/lib/perl5/5.8.8/VMware/VICommon.pm.
BEGIN failed--compilation interrupted on line 11 of usr/lib/perl5/5.8.8/VMware/VICommon.pm.
Compilation failed in require on line 15 of the usr/lib/perl5/5.8.8/VMware/VIRuntime.pm.
Compilation failed demand to line 11 of usr/lib/vmware-vcli/apps/performance/viperformance.pl.
BEGIN failed--compilation interrupted on line 11 of usr/lib/vmware-vcli/apps/performance/viperformance.pl.
I have installed a perl prerequisite modules and RPM. Any ideas?
Looks like it is a shared library for 32 bit, not 64 (despite the name).
I would try reinstalling LibXML with CPAN.
-
Problem with vSphere HA (vSphere HA Agent status electoral or inaccessible)
We have 8 cluster nodes (5.5 Esxi)
After the reboot of the switch works vMotion.
And status of the HA agent changed his election or inaccessible (except for a single node, which has the status of agent HA a mask).
Tried to disable and reactivate XP on a cluster. Tried to remove a node from the cluster and enter it again.
What could be the problem?
Contributed to the complete elimination of the configuration of the network for 4 nodes. And reconnect them to the cluster.
-
Problem with Vmware Ha cluster
Good dekdak all
I have a problem with vsphere 4.
Today, I have to change the ip of the host 3 addreeses and a virtual Center.
I do these things with your help like that, connect on VC disconnect all hosts and remove.
Vcenter stopover services change beginning vcenter intellectual property services.
Change the Ip addresses of the hosts, but now I get this error when I try to connect to the host to vcenter.
Unable to connect ha agent on this host,.
Please help me because Icannot create the cluster now, I don't know why
Hi Patrizio,.
Make sure your vCenter and all ESXs records are updated in your DNS infrastructure (or files hosts...).
Good luck.
Concerning
Franck
-
VRO integration problem 7 with vSphere 6 WebClient
Hello
I've recently updated to vShere 6 (6.0 U1), I created a new (7.0.1) vRo device and imported all the workflows of vCO 5.5. The vRO device works well, but it is a question of integration with the web client. I followed the workflows to add the extension to the web client, and they have successfully completed.
https://Orchestration.IO/2015/09/28/deploying-vrealize-Orchestrator-6-0-3/
Unfortunately I can't get the server vRO to show on the weblcient. Looking at the vsphere_client_virgo.log I noticed the following entries:
[2016 05-11 T 13: 56:55.972 - 06:00] [ERROR] vc-extensionmanager-pool-109 70000092 100010 200002 com.vmware.vise.vim.extension.VcExtensionManager com.vmware.vco package has not been installed.
Download https://XXXXXXXXXXXX:8281/vco/vsphere-web-client/vco-plugin.zip error. Make sure the URL is accessible then login/logout to force another download. javax.net.ssl.SSLHandshakeException: received fatal alert: handshake_failure
at sun.security.ssl.Alerts.getSSLException(Alerts.java:192)
at sun.security.ssl.Alerts.getSSLException(Alerts.java:154)
at sun.security.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1979)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:1086)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1332)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1359)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1343)
at sun.net.www.protocol.https.HttpsClient.afterConnect (HttpsClient.java:559)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect (AbstractDelegateHttpsURLConnection.java:185)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream (HttpURLConnection.java:1301)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:468)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode (HttpsURLConnectionImpl.java:338)
at com.vmware.vise.util.http.ConnectionManager.connect(ConnectionManager.java:186)
at com.vmware.vise.util.http.SimpleHttpClient.connect(SimpleHttpClient.java:218)
at com.vmware.vise.util.http.SimpleHttpClient.executeMethodResponseAsStream(SimpleHttpClient.java:109)
at com.vmware.vise.vim.extension.VcExtensionManager.writePackageToFile(VcExtensionManager.java:873)
at com.vmware.vise.vim.extension.VcExtensionManager.downloadPackage(VcExtensionManager.java:820)
to com.vmware.vise.vim.extension.VcExtensionManager$ 1.call(VcExtensionManager.java:639)
to com.vmware.vise.vim.extension.VcExtensionManager$ 1.call(VcExtensionManager.java:631)
at java.util.concurrent.FutureTask.run(FutureTask.java:262)
to com.vmware.vise.util.concurrent.QueuingCachedThreadPool$ QueueProcessor.run (QueuingCachedThreadPool.java:866)
to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:471)
at java.util.concurrent.FutureTask.run(FutureTask.java:262)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)
When I go into the vCenter I can download the package without problem, I even added the free signed certs to the server to avoid the security warning.
Any help on this is much appreciated.
Thank you
Juan.
Security (attack of POODLE and other) reasons vRO 7.0.1 has TLSv1 Protocol disabled by default. So if a client application like Web Client tries to open a connection using TLSv1, it will be rejected.
There are 2 possible workaround:
- The first option is to configure the Web Client to use TLSv1.2 or TLSv1.1 outbound connections. I don't have the exact procedure to do by hand. I think it is intended to solve this problem in vSphere 6.0U2 but I don't know what happened.
- The second option is to configure the vRO server to accept connections TLSv1. To do this, connect the unit to the vRO, open the file /etc/vco/app-server/server.xml for editing and change the attribute:
sslEnabledProtocols="TLSv1.1, TLSv1.2"
with
sslEnabledProtocols="TLSv1, TLSv1.1, TLSv1.2"
After that, you will need to restart the vRO service for the changes to take effect, with the following Linux command:
service vco-server restart
-
Problems with having a Remote Host for the server vCenter Server vSphere?
Hello
We have a single vSphere Host located in the United Kingdom and a host vSphere cluster type 3 in France. I plan to add the vSphere Host UK to the France of vCenter Server.
Does anyone know of any problem with the addition of a vSphere Host of a vCenter Server that is in a remote site rather than on the local network?
See you soon
Vince
I put my vCenter without problems. Just keep in mind not to create a cluster with 2 teams who are on different nodes. Only you can manage the remote ESX host
-
Problem with the 4.1 vsphere data migration tool.
Hello
I guess that's the problem with trying to be an early adopt.
I'm trying to upgrade my environment to vSphere 4.1. My old VC was 32 bits with a local SQl 2005 express (it's a lab - I don't want the full SQL version blown).
I re isntalled on a x 64 2008 R2. No, it's fine. But empty... no license or anything like that.
The docs say you can use the data migration tool to move the DB and config.
I followed the instructions and after backup.bat running I get the following error:
DB logs: HResult 0 x 2, level 16, State 1
Named channel provider: could not open a connection to SQL Server .
Sqlcmd: Error: Microsoft SQL Native Client: an error has occurred while
establishing a connection to the server. When connecting to SQL Server 2005, th
rupture may be caused by the fact that under the default settings SQL Server
does not allow remote connections...
Sqlcmd: Error: Microsoft SQL Native Client: login timeout expired.
Error: failure of vCenter Server DB backup
FYI, yes connections allow, is named pipes, sql browser started. Former VC works very well. The ODBC test OK. Running local and connected system as a local administrator. Tried running SQL express under the same admin account. Still broken.
Very well, I can connect with:
sqlcmd - s. \SQLEXP_VIM
and
osql /Snp:
.\pipe\MSSQL$SQLEXP_VIM\sql\query EISo he has set up the right and listen...
Only thing I noticed is that the papers say:
vCenter Server DB instance:
so it's not 'list in fact an instance...
So I'm stuck. Any ideas?
Thanks in advance
Found the solution in this article:'t-work-hresult-0x2-level-16-state-1/ http://digitalformula.net/technical/sqlcmdexe-on-sql-2008-doesn
-
Problems with the VMware vSphere Client
Hallo
I have problems with the new Client VMware vSphere.
Until I installed the new client on my system, I had the old VMware inferstructure 2.5 client to manage my esxi.
I was then going to test esx 4 box of the anther and then installed the vsphere client.
But!
When I try to connect my old esxi 3.5 or the new esx 4 I get the following error from the vsphere client:
"Analysis of the server"192.168.2.2"" clients.xml"file error.
Logon will continue, contact your system administrator.
I then clik Ok and get this message:
The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.
I tried to delete the old client and the new and then install the new, but still it dosent work.
I am running Windows 7 64 bit.
It will not work on windows 7, period. You must run the VIC from a supported operating system
-
Problem with OpenManage integration for vCenter - OMSA status: update required
Hello
We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.
The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".
Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.
Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.
Please indicate how we can make this work?
Concerning
Milan
Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.
ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.
Thank you
Maybe you are looking for
-
Why the Google search page displays partially in Arabic or similar language with symbols
Works fine in Chrome.
-
I have reset firefox and lost control of the sound icon
Using a laptop hp compaq. A get the slow start, so reset firefox. After reset, have more control icon in the bottom right of the screen. Other icons are still there. (State of the battery, windows sidebar, etc.) Have no sound.
-
Satellite P100-275: how to start Express Media Player
I have a computer laptop P 100-275. I'm looking for the Express Media Player. But I can, t find. Only the windows media player.I, ve used the recovery cd. But I can, t find it yet. Who can help me?Operafreak
-
I have windows vista, after compact my windows mail, my subfolders under Inbox disappeared. How can I find them? I tried the system restore but it doesn't work, I looked in the box of reception, windows mail, microsoft, appdata... but they are not
-
BlackBerry Smartphones Quick Question about BBWeather on a Pearl
The weather is supposed to show on my BlackBerry Pearl 8110 desktop? I saw screenshots of the application and the time is displayed in text along the bottom of BlackBerry Desktop not only on the icon of the app but, it was on another BlackBerry devi