Problem with D009TU in latest Notebook drivers

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Problem with the Lenovo Z575 VGA drivers

  Hi guys,.

  As you probably know, driver VGA for this laptop is a bit outdated. I have a problem with Rage. It crashes after a few minutes of play. I guess that it also works with the only Integrated GPU because there are differences in performance between the modes 'High Performance' and 'Save energy' in the ATI drivers.

  So I decided to install the new version of Catalyst 12.6 beta which has full support for mobile and swichable graphics. Alfer, Rage finallny works like a charm - no falls down and inprovement of great performance, but the BONE started to freeze and crash. Also other games began to work more bad. On official catalyst 12.4 site AMD form is identical on 12.6 beta.

  And the strangest thing is that my friend has the Asus laptop with the same features of the CPU and GPU, and he has not had problems using the latest drivers form AMD site.

  If you have any sugestions how to solve that or what is going on, please help me

  OK, I solved the problem. Just had to uninstall Amd accelerated video transcoding device and now all works well on catalyst 12.4 in the site of AMD.

• Problem with the HP Pavilion tx2000 drivers!

  Hi all!

  I'm trying to find a solution to my problem for a whole day, now and until now I Don t have nothing!

  My problem:

  Last week, I installed Windows 7 Profesionall on my laptop and I have a problem with drivers for graphics cards, shortcut keys on fingerprinting and monitor drivers.

  I installed win 7 drivers on your page (sp45823) and nothing fundamentally heapened. The most important are graphics drivers for me now. As I said I installed the HP driver pack drivers and also page from Nvidia, but still nothing. When I go to display properties whenever the name of the graphics card graphic VGA Standard.

  I would ask you if you could help me how to find the drivers or if you could tell me what to do.

  Concerning

  Please try to get the driver using Windows Update in Device Manager. This will search for the most appropriate driver.

  While I am an employee of HP, I'm not an expert on all our products. When I offer advice, I do not speak for HP.

• Problem with webcam integrated on notebook Aspire 5532

  I bought a laptop Acer Aspire 5532 and it is supposed to have a built-in webcam. However, I can't make it work! I tried to download the drivers on the acer for the "crystal eye webcam' site but when I sign on sites like"Skype"and you try to use the webcam, I get the message found"no device ".
  I am really frustrated and would like to know what the problem is, if I want to return the phone and get something else.

  Hi all

  Thanks for posting on the Microsoft answers Forum.

  If you have problems with a built-in webcam, it would be best to go back to the manufacturer for assistance.
  First of all, I would like to download all the current drivers that might be available for the Crystal Eye webcam.

  Acer Web site click here for support.
  They should be able to help you on the built-in hardware.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Acer XB270HU ULMB problem with my screen, or maybe drivers? Baffled

  Greetings!  I bought this XB270HU this month and I love it.  It seems that G-Sync works like a charm, and this 144 Hz refresh rate is wonderful.  There is some bleed slightly at the top left which can be seen with black bars around some videos, but never in the videos themselves.  Considering that it is the only way he can be spotted, I thought I finally found a BIG screen.  My old one was a Dell S2440L, who had an exceptional contrast and zero bleeding, but had problems massive overdrive.

  While everything happens very, I chose to use ULMB sparingly because it bothered my eyes the first time I tried it, although the screen visibly drive doesn't bother me.  For the record, this monitor is the one that supports ULMB at 120 Hz and if you try to activate at 144 Hz, the monitor starts flashing a message saying it cannot be used to 85 100 and 120 Hz.  Thus, it * is * working at 120 Hz.  I'm sure I can have used experience of nvidia GeForce update graphics drivers at least twice by habit, and Windows Update installed a XB270HU driver as well.  Recently, I went to turn on ULMB at 120 Hz for use with a movie and was shocked to see that the screen got * best * instead of gradation.  I chose 85 and 100 Hz to see, and it lit up as well, for the same settings.  I don't really understand what happened, but it feels as if its not even using ULMB.  Since it worked well and all of a sudden is not, is it a driver problem to an update or something go haywire inside the screen?  I've never fiddled with something other than the brightness levels.  I have the 144 Hz Gsync mode at 50% brightness instead of the 36 percent that I had it before and when I turn ULMB 30% brightness, it seems much brighter than it does now.  I find it incredibly strange and hoped someone could we help with that or help me fix.

  Some features:

  8.1 Windows 64-bit (update to 10 soon)

  Intel Core i7 - 3770K @ 4.4 Ghz

  ASUS Maximus V formula BIOS 1903

  Memory of 16GB (8GBx2) DDR3-2133 G.Skill RipJaws X series

  eVGA GeForce GTX 980 Ti SC + ACX 2.0

  Using the DisplayPort cable supplied with the monitor yet.

  Acheron,

  MP received, thank you.

• Problem with update display Pavilion dv6 drivers - 3023ca

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Qanea wrote:

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Hello Qanea.

  I looked at the failure code and confirms the results of the test.  The video card (the card integrated Intel HD) is having problems.  It probably needs to be replaced because the question is right after a reinstall of Windows.

  Have you tried running HP Support Assistant to ensure that the laptop is to install all the correct drivers?  Here is a link.

  Could you provide me the product number?  I can use this information to get you details instructions to replace the motherboard, which is the most likely solution to this question.  This document can show you where it is located.

  If you do not want to repair the laptop you can always contact the HP support directly.  The number for US / Canadian customers is 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Have a great day.

• I have a problem with the installation of the drivers for the Belkin card.

  Hello

  I just bought a new Belikin N150 USB Wifi Adapter. I went through the installation disc and all except that tooth was installing the drivers. I tried to install the drivers, and it gave me this error. Help, please! I am also on an Administrater account

  

  ~ Matt

  Hello Matt,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install other software/drivers without any problem?
  2. You have security software installed on your computer?

  Try it out below mentioned methods and check if it helps.

  Method 1

  I suggest you to disable the temporary security on the system software and check if it helps.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  This error can occur due to permission problem in the registry for the USB controllers. I recommend that you take the permission to the registry editor USB. To do so follow the steps below.

  • Run regedit from the Start menu. Be sure to export a backup copy of the registry before continuing.
  • Browse to the location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\USB

  • Right click on the USB folder and select permissions...
  • In the dialog box, make sure everyone is a listed group and that the reading is checked.
  • Click the Advanced tab and make sure that include the permissions that can be inherited from the parent of this object is selected, as shown.

  

  • Go to the owner tab and be sure to replace the owner of subcontainers and objects is selected as shown.

  

  • Select Apply to apply these changes. A warning message may appear at this stage. Select OK to continue.
  • If necessary permissions for USB dialog box select , and then click OK to exit.

  Feel free to post them here if you need further assistance.

  Thank you.

• Problem with non-plug-and-play drivers.

  I need assistance with drivers Non-Plug and Play, Null, for a Windows 7 Professional 32-bit SP1, I find the Question, no answer to the problem. In the Device Manager, on the driver tab: status is stopped and does not start. And on the general tab: device status is: this device is not present... Bonneau, Bonneau, bla (Code 24). someone Pleazzzzzzee help me, lolol

  Hello Thomas,.

  Welcome to the Microsoft Community Forum.

  1. Which device you are trying to connect to the computer?
  2. You did no particular change in the computer?
  3. A device that has a code 24 in Device Manager?

  Code 24 indicates that the device is not present or is not working properly, or does not all its drivers installed.

  If the error code reappears, check that the device is properly connected to your computer. For example, remember that all the cables are correctly installed, or that the cards are properly housed in their locations.

  See the article: error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Also try to update the drivers for the device.

  See the article: automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Please respond to this answer, we will be happy to help you.

  Thank you.

• Problem with my HP Compaq notebook 6910p

  When I install any OS 7, 8.1, or all 10 cards are being Setuped except the video card (ATI mobility Radeon

  2300 X), I searched a lot for its installation, but nothing. I downloaded several catalysts but without any progress. even I entered

  the official ATI website search for him but nothing again. I Enterd HP site get my labtop model of searching for it has

  Cards, but when I download one of them, there is an error message saying "this configuration can probably not run on your PC.

  I hope you help do me this (ATI mobility Radeon X 2300) Driver

  You are the very welcome.

  Depending on what is the problem, I had the same one on too, I forgot you talk.

  This does not happen on the 6910p with the Intel graphics card, it only happened on my 6910p with graphics from amd.

  You start the PC from a cold start and you get a blank screen (black), but everything is on.  The only way that you can to join the W10 bureau is to restart the PC (and I had to do with the W10 installation disc).  Just enter the disc menu and take it out, so would be to restart the PC.

  The solution for this is to go into power options and uncheck the box for enable the quick start, and it will work fine then.

  If you are not familiar with where to find this setting, this link will be of assistance to you.

  http://www.intowindows.com/how-to-turn-on-or-off-fast-startup-in-Windows-10/

• problem with the hp 15-g013sw drivers

  Please help me, I bought a new HP laptop 15-G013SW free back here in Greece, and I can't find the drivers for the site official hp. can I find the drivers and download somewhere else? Please note that I can't connect to Internet through ethernet or wifi.try with win 7 ultimate x 64 operating system.

  Thank you!

  Hello:

  Download the files on another PC and copy it to a USB or burn it to a DVD. This media to install the drivers on your 15 HP.

  First, install the amd chipset drivers and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then, install the graphics driver and restart.

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2064

  Audio: Accept the agreement.  Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader: download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Webcam:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125247_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I don't know what model of laptop wireless card is.

  Please do the following in order to identify the model of the wireless card and find the driver, he needs...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Problem with the HP 15-r033tx drivers.

  I can't find a driver for my hp15-r033tx for win8.1 (64-bit). Please provide the drivers, it would be really grateful.

  Hello:

  Here is the link to the support page and driver for your model.

  http://support.HP.com/us-en/product/HP-15-R000-notebook-PC-series/6875200/model/7308901/drivers

  Select W8.1 operating system from the menu drop down.

• Problems with Plug n Play device drivers

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '. I tried the search function for a folder called instr.lib, but I couldn't find one on the computer. I made a new folder instru.lib and run one of the files .llb, which opened in LabVIEW, manually, but they gave me ten mistakes most read like this

  "-VI should happen to ': \hp81110a\hp81110a.llb\HP81110A Reset.vi' has been charged with"C:\Users\Lab\AppData\Local\Temp\Temp1_hp81110a.zip\hp81110a.llb\HP81110A Reset.vi"

  I tried to manually navigate to the folder \AppData as to move to the folder where they were expected, but I did not see this .vi when I opeend my user \Lab\ folder.

  What happens here?

  Thanks in advance!

  vweltin wrote:

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '.

  Your operating system is windows, no?

  You search under \Program Files\National Instruments\LabVEW (version)?

  Apparently not that you are looking in the right folder of LabVIEW.  You should see:

  applibs

  self-test

  CCodeGen

  cintools

  Database

  examples

  Help

  InStr.lib

  Internet

  ... and so on...

• Win 7 problems with HP Pavilion dv4140EA notebook PC

  Hello

  Years, I was the proud owner of a HP Pavilion dv4140EA PC laptop. Last week, I installed a system Windows 7 Home Premium operating in my machine. Thus, some functions stopped working - especially I can't connect to the Internet because the machine does not recognize the wireless device or cable device. Consultation of the "Device Manager" application revealed that the drivers for the following devices are missing: video controller, mass storage controller, multimedia audio controller and network controller.

  Please send me the relevant drivers or advise me on other ways to make my computer thanks to the new operating system function.

  Thank you

  RS

  Great! It all works now. Thank you very much!

• problem with TSSTcorp cddvdw sh-s223c drivers

  My dvd device has stopped working altogether.  I get the error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "but when I try to update it tells me that windows has determined the driver software is up to date.

  I uninstalled, reinstalled etc but no joy.

  It was fine before... nothing has changed as far as I am aware, no major updates, installs or downloads.

  Help!

  Hello

  Method 1: I'd say you run the fixit provided in the link and check if this can help:

  http://support.Microsoft.com/kb/982116

  Method 2: run the fixit for the link if the problem persists after you run the fixit above:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: you can also run the fixit from the link:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us