problem with dvd Panasonic Matshita UJ862A

Similar Questions

• PROBLEM WITH DVD DRIVER 'MATSHITA DVD-RAM UJ8EI.

  All of a sudden my cd/dvd driver will not work. O/s is to win 8 64-bit. I get the following message?

  Reinstall the device driver: problem with the driver for MATSHITA DVD-RAM UJ8EI, MATSHITA DVD-RAM UJ8EI has a DRIVER PROBLEM.

  I have, have repeated the AutoCorrect, but still get the same message. Can someone help me solve the problem?

  Hi Auggy, thanks for the quick response. I did a 'restoration' and now the pilot works again.

  If all goes well it will continue to work. Hope you have a fantastic evening.

• A very strange problem with DVD player (some DVD play not)

  Hello everyone.

  I bought a laptop Dell Inspiron 3543 2 months ago. Overall, I am very satisfied with this product, but I have a problem with the DVD player. When I insert some DVD discs, the driver reads some DVDs but not others. After trying to play DVDs, I see that the DVD player play about half of the DVD I'm looking for. Although I can guarantee, I didn't send my laptop to the service because I can't work even a day without my cell phone. So, in order to solve the problem, I bought a DVD player new, original Dell (the same model of dvd player, which is Panasonic Matshita DVD +-RW UJ8E2). Today I started using my new DVD player, but it also has the same problem as my old DVD drive or it also does not play some DVD.

  To make the issue even more strange, here are some details:

  -My dvd drives have no problem and I have tried many original DVDs (especially the original films). And all the dvd disks that do not play on my computer play on other computers with no problems. There is no problem with the disks.

  -Certainly no problem with the "DVD region Code". I use original DVDs with region code 2, which is the area code for my country.

  -All my drivers, the operating system and the dvd drive drivers are up to date. When I look at my DVD drive properties, it is written that "the dvd drive works properly.

  -When I insert a DVD disc, if my DVD player he plays, he plays each time. But if my dvd player does not play a dvd, and then he never plays it. So, there is a consistency in the dvd disc set to play or not. When a DVD disc does not play, my DVD player rolls the drive some time and then the DVD done pretending as if there is no disc in the drive.

  -Both my old and newly purchased DVD drives have exactly the same problem, so I think that there's no problem like a lens dirty. I also think that there is no mechanical problem with one of my DVD drives because my newly purchased, original DVD player also has the same problem.

  I thank everyone for any help or advice in advance.

  Today, I received my dvd player third, new, Chinese, not original from a seller of spare part. He plays all DVDs with no problems. :)

  If in the future someone always has the same problem as me and read this Web page to find a solution, you know where is the problem.

• Problems with DVD/CD-RW on Satellite Pro M series

  After searching the Forum questions / answers, it seems that many users have problems with the carpet * a 841 s UJ which is equipped with several types of Toshiba portable computers and I wonder why someone from Toshiba has not been able to intervene and to produce a final solution.

  In my case, I can not format a CD - RW or a DVD + RW because the message "D:\ is not accessible" and also "incorrect function".

  If DLA is selected in properties, can be as much as to be shown to a format selection window, but "Format failed due to general failure" happens.

  Toshiba installation CD will work OK (I did this several times after losing data on the hard drive) but the writing seems to be beyond the capacity of the disc.

  Does anyone have any suggestions?

  BTW, the deletion of "Upper and Lower Filters" registry that I have seen offered as a solution will not work because there is only one entry for low filter - no higher.

  You try to format the two supports using Windows option or using an application like Nero?
  I can't imagine that there is a serious problem with ODD. Test it with Nero. I'm sure it will work properly.

• Problem with DVD - ROM SD-C2402 (DVD multisession)

  Hello

  I have the following problem: I recorded a DVD in different stages (multisession) with Nero 6, but I can read only the first session on my laptop (Windows 98SE). On the other hand, I have no problem with multisessions CD

  Could you help me in this case?

  Thank you

  John

  Hello

  I m not 100% sure, but I think that it s a problem with the burning software and/or the media. I found information there are many problems with playback of the files after burning the multisession DVD-R, + R (Win98SE). In my opinion, you should try to burn DVDs on media RW multisession.

  Good bye

• Equium A60: Some problems with DVD Super Multi Player

  I have problems with my DVD drive. When I try to load anything (CD or DVD) it will open a blank Explorer window even though I know that something is on the disk.

  Sometimes, windows gives me the error message

  "D:\ is not accessible.
  "The operation could not be performed because of an I / 0 error.

  I have the latest drivers for it.

  How it works again?

  Hello

  Please, remove the drive from Device Manager. After restarting again the operating system should recognize the drive again. Maybe this procedure will solve this problem.

  Good bye

• Problem with DVD Multi-lecteur

  HL-DT-ST DVDRAM GSA - 4083N

  The above is the exact type of my DVD player that comes with my ThinkPad T60 laptop. But now I have problems with it.

  He can't seem to read a specific type of DVD that I usually use to burn data and backup with rescue & recovery. When I place the DVD, which is a Sony DVD - RW, in the car, he just kept reading (I could hear it turns inside), then the player is stopped. I tried several methods, some of which are:

  (1) read the DVD to another drive (it seems to work)

  It happened in may R61i too, so I just called Lenovo and shipped a new for me...

• HP Envy 17 j 000 EB: problems with DVD player

  Dear Sir

  I am not able to play a DVD with my HP Envy 17 000 EB j.
  My laptop said that there is a problem with the driver.
  I took several steps explained on the web, but it did not help.
  Is it possible to reinstall the driver...?

  Thank you!
  Dieter

  Hi Dieter,

  Try the following.

  First of all, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When reinstalling, restart the laptop.

  Allow windows fully recharge, and then download and reinstall the driver of gpu from Intel on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Once again, when reinstalling, restart the laptop.

  Kind regards

  DP - K

• Problem with DVD I burned

  I burned the DVD on my Windows 7 Professional.  After that I have burn I preview them.  I can't not burn, but I can't preview them on my computer.  They work in another computer in my home.  I find answer to my problem and I tried but I will always have the same problem.

  Any suggestion?  Thank you.

  Maybe a problem with your hardware...

  Is this true for all DVD burn - even GIVEN simple?

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with DVD/CD material

  Hello

  Thought I'd start here and go from there... my wife has a laptop computer that has problems with the DVD/CD player and unable to operate, despite attempts on and off the internet... hours thinking maybe there is a problem with the hardware itself... anyway... she used the player very little anyway and I was wondering what would be the best method of copying a cd bootable on a drive Flash and I can use the USB port to install any CD of this nature... a method that might work with all windows...

  Larry Wöller

  A popular easy utility to use for making a bootable USB key is Rufus. It can also be done with some steps more natively.

  If you don't want to address the problem of the laptop's optical drive, you can also consider getting an external drive.  For example, http://www.newegg.com/Product/Product.aspx?Item=N82E16827136266

  Rufus 1.4.6 build 440

  http://www.Softpedia.com/get/system/boot-manager-disk/Rufus.shtml

  Manual process explained

  Create a USB Bootable Flash drive

  http://TechNet.Microsoft.com/en-us/library/jj200124.aspx

• Problems with DVD + R DL disc in the optical drive T500

  Hi - This is a W7 T500 running (2242CTO) / 64 - I downloaded the last Roxio Creator Business Edition and was able to burn a 4.5 GB file to a DVD + R DL disc using its function as data disc, no problem.   After burning, I closed Roxio and inserted the DVD into the player trying to read the content and after training, spun, I saw him briefly the [good] record label (in Windows Explorer), then the reader has become powered off State (Device Manager reports the drive has been "prepared to remove safely').   He turns to eject the tray or by right-clicking and selecting "lit.  It don't turn on even if I physically the disc to eject and reinsert.

  Other formats, CD - R, CD - RW, DVD - R and DVD - RW seem to work well.

  I have to reboot the machine to get the disc back and everything by restarting in this State, W7 is suspended in the shutdown process and I have to force a shutdown with the power button (I had no stop blocking otherwise).

  BTW, the drive is a carpet * beep * a dvd - ram UJ862A, pb04 firmware revision.   I am actively info on this drive and this firmware, meanwhile if anyone has any ideas they would be more than welcome.   Thank you!

  (PS: I tried to put "Mat * beep * one ' in the field 'Tags' of this message and got an error on the word's * t' is not allowed in this community!)

  Suspect bad media - can read brand DVD + R DL but not generics I bought...  Case closed for now.

• HP Envy 17 Laptop: problem with DVD/CD player

  I recently bought a laptop HP Envy 17 refurbished to replace my laptop screen Acer of 18 ".

  He had Win 8.1 on it I then upgraded to win 10.

  Everything worked as it should, including the CD when he arrived, and after the upgrade.

  As I was used to having 2 hard drives on my Acer and did not find a drive for the HP cable I used one of them to replace the DVD unit

  http://www.Amazon.com/SANOXY-Caddy-12-7mm-universal-DVD-ROM/DP/B0056EW4A4

  It worked perfectly.

  I then found a drive cable of HP on eBay second hand and when it arrived I installed the second disc in the DVD player OK and re-installed hard drive Bay - although I expected to replace it later with the Hard Drive caddy so I might have 3 internal drives.

  This is where the problem started.

  Although the second disc showed now and available to use, the DVD player is no longer appears in the Explorer or in Device Manager, even if I remov the second car of the Bay.

  Can someone suggest any way how to fix this problem?

  TIA

  UPDATE:

  4th restart the laptop cured the problem and the DVD is now appear.

  Yet once replaced caddy of DVD with a hard drive Caddy in his place and I have now 3 internal hard drives on my laptop.

  Well happy!

• Compatibility problem with dvd/cd burner is a driver or hardware?

  I have Toshiba A206 s5000 laptop with a DVD/CD-RW drive after a full format and restore. I'm not exactly sure how long after or if it was just after the installation started. The drive will read and write to some DVD. But when I take a cd insert the corresponding LED flashes for a short period before stay balanced. It does not make up the selection dialog box or start a program.

  I was told that it is possibly a compatibility issue. If it is then in the disk hardware or drivers.

  Curtis has always lost in the Code,

  I found the answer to this Question and it is material. The dvd has a built in decoder and this work fast decoder interface. I replaced the drive and corrected the problem.

  Curtis

• Problem with DVD Vista

  I got a new DVD, but it won't work. It is said

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  put the old back in and the same error if that may not be bad.

  Can someone help me get this thing running. Ms. wants $99 for a time help.

  Thank you all,

  Barry

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.