problem with fluid?

Similar Questions

• Problem with fluid form is not "fluid".

  I have problems to do a fluid form in Designer ES...

  Using Windows 7, Acrobat 9 Pro Extended and life cycle of Designer ES 8.2

  I'm a noobie to the use of life cycle of Designer ES and usually only use Acrobat Pro Extended to create PDF files in other formats.

  I am trying to help a group not-for-profit with a scholarship application form. They gave me a form that was created in Word. I converted it to a form of Acrobat in Acrobat 9 Pro Extended without problem (as I know in any case). However, the problem with the Acrobat form was the answer for the questions boxes would create a scroll bar when the answers are longer that the size of the box and the text beyond the viewable area is not displayed when you print. I read the other threads in this forum and looking for tutorials to make the fluid shape using the life cycle Designer ES by checking allow several lines, expand to fit under Y:/height and economy in a dynamic form of XML.  What makes the text box expand as needed, but the text and then overlay the text below in the form. I need the entire form to expand as needed based on the length of the answers to the questions. I know that others have had this problem, but I can't seem to implement correctly based on what I read when others have reported this problem. BTW - the form contains a header with the page number on the second page that should be repeated if the shape extends to three pages, etc. and a signature block which must remain at the bottom of the form when you are finished. I was not able to make the fluid form to test or work with these other potential issues.

  I am frustrated with this problem and would appreciate your help. I downloaded a copy of the form sanitized to see if someone can take a look and see what I'm doing wrong or missing.

  http://www.box.NET/shared/9a0bf9v8l8nn97slxchh

  Thanks a lot for your help.

  Eric

  Hi Eric,.

  Here's your form to you, I did a job on page 2 for you out of the box. https://acrobat.com/#d=0Dm * XIrtAFi4Y49nwWXBWQ.

  What I would say is that you have a bit of work to do. I changed the content on the Master Page (purple dashed area) area. This should be within the area of the page, giving you a margin. This is especially important when working with past presentations.

  You will need to place all the objects that are static within a positioned subform, then objects that grow in height within a Flowed subform. So also, the page must be set flowed.

  There are some forms here you should have a good overview:

  Explorer positioned and flowed subforms: http://assure.ly/eSGQMt.

  Extend page layouts objects flowed: http://assure.ly/e2jR0C.

  Making the dynamic fields: http://assure.ly/g80MVY.

  Create dynamic tables (has screenshots): http://assure.ly/gk8Q7a.

  Hope that helps,

  Niall

• Problems with saving files, creating new layouts div fluid

  Problems with saving files, creating new layouts div fluid. Can I reinstall all the software Dreamweaver?

  Thank you

  I reinstalled and all is well.

  Sent from my iPad

• A problem with the design of the

  Hi all

  Im a beginner with Adobe musejuste a few days ago, but actually I have my own experience with the design of Web sites!

  Today, I am facing a big problem with a Web site under creation!

  When I finished the first home page, home page, I saw that I missed something, wish is receptivity. in fact, I have not now what to do, there are a lot of rectangles and shapes and paragraphs!

  There is this white areas when I pull the horizontal bar on the left, even if I apply my rectangles stretching mode and mode fluid forms!

  and here's an example!

  When full screen mode:

  

  reagent:

  

  and this comes, even the green bar is under the stretch the width of the browser!

  

  I have more problems with delicate design, such as duplication of paragraphs and the inability to convert the navigation bar, like a menu of stationary box etc...

  Please if you can help me, because this is sort of a first job for me!

  I'll wait for your help please!

  Thanks in advance,

  Success,

  Rabi.

  ArnoDHeros wrote:

  Well, thank you very much for your answer!

  I don't know, I ask just 3 days for the homepage, I don't think that I could delete it and stard frm zero!

  but tell me, if I skip this part, empty spaces, it will be a problem for phone users, when I converted to phone available?

  not a phone copy only the page names... you would be rebuild your site for phone (whichassumes that you're going to this option) in responive layout, the rules change

  ArnoDHeros wrote:

  on the navigation bar, how can I convert it responsve box like this:

  Reactive demonstration of Navigation or menu full screen! Note that the navigation is created by a button widget!

  This demonstration of navigation is made to the office and will not work on many phones, my nokia 520 running 8.1 does not open a part of this page in ie, but I use a mini web browser application that can open most of the page without it hambuger image

  

  When you design for the web don't just test your site on office or you will make common mistakes that other office users do... phones are different devices and they do not behave like a chewed down desktop screen.

• Problem with page validation APEX_APPLICATion master detail.  Help!

  I'm having a problem with the Apex_Application.g_fxx data structure.  I'm trying to validate the lines in my page master detail and need to use apex_application.g_f10 as the name of the variable inside the HTML data source electricity.  The name of the item I need is "f10" because it matches the database column "status" on my page.  I'm trying to validate that all the detail items have the same status, or an error is reported.  I use the following PL/SQL block that returns a Boolean value:

  < code >

  declare
  l_first_value varchar2 (4000);
  Start

  -f10 = column PO_STATUS of PO_DETAILS table on a part as a table on the page.

  l_first_value: = apex_application.g_f10 (1);
  because me in 2... apex_application.g_f10. COUNTY
  loop
  If l_first_value! = apex_application.g_f10 (i)
  then
  Returns false;
  end if;
  end loop;
  Returns true;
  end;

  
  < code >

  The HTML data that I is not intended to "f10" are the following:

  < code >

  < td headers= "Status" class= "t20data" >

  < label for= "f10_0000" class= "hideMeButHearMe" >status< /label>

  < Select name="f10"  id="f10_0000">

  < option value= "" selected= "selected" >make a selection< /option> ""

  < option value= 'APPROVED' >APPROVED< /option>

  < option valeur= « FERMÉ » >FERMÉ< /option>

  </ Select >

  < entry type="hidden" name="f02" value=""  id="f02_0000" />

  < entry type="hidden" name="f03" value="30427" id="f03_0000" />

  < entry type= 'hidden' id= "fcs_0000" name= "fcs" value= "2158A9B101842608F4CA966C0BC1433D" >

  < entry type="hidden" id="frowid_0000" name="frowid" value="" />

  < entry type="hidden" id="fcud_0000" name="fcud" value="D" />

  </ td >

  
  

  < code >
  

  So I do not know why there could be a problem when used to work before this validation.  The PL/SQL block takes the first line of F10 data and compare it to successive lines.  If the data is not equal, then an error occurs and the user is prompted to adjust the data.

  It doesn't work anymore, although I checked and the status are still of points in F10.

  I left mouth gaping.  I do not use an official page master detail previously.  I used two separate front pages: one for the header and one for show master detail.  I've updated the page for the treatment of the more fluid user. I think that even if the data structure would be the same, but maybe I'm wrong.

  Any ideas?

  
  Thank you!

  Thank you to reproduce the problem so overall. Note that if you will share your workspace in this way you need to change your username to something else than a direct email address and don't use not the actual data for your test cases. Create a guest account to developer without administrator privileges to work space for the members of the forum to use.

  Validation in this app is coded to use a different picture of the description in this thread. Above, you have identified the point like g_f10 dashboard, but the validation code is using g_f09:

  declare
    l_first_value  varchar2(4000);
  begin
  -- f09 = PO_STATUS column of PO_DETAILS table
    l_first_value := apex_application.g_f09(1);
    for i in 2 .. apex_application.g_f09.COUNT
    loop
      if l_first_value != apex_application.g_f09(i)
      then
          return false;
      end if;
    end loop;
    return true;
  end;
  

  Therefore (thanks to instrumentation code added), the validation is running by using the values of the previous column, which was be the one that I have changed according to your instructions:

  0.09114	0,00018	... Posting type "Status check IN." -: FUNC_BODY_RETURNING_BOOLEAN	4	0%
  0.09132	0,00049	... Run the statement: select count (*) in the sys.dual where exists (Select 1 from PO_DETAILS where PO_ID =: P230_PO_ID)	4	0 g
  0.09181	0,00015	...... Result = true	4	0%
  0.09196	0.00573

  ... Run the statement: declare function x return boolean is begin declare

  l_first_value varchar2 (4000);

  Start

  -f09 = PO_STATUS table PO_DETAILS column

  l_first_value: = apex_application.g_f09 (1);

  apex_debug.message ('g_f09 (1): %s, l_first_value);

  because me in 2... apex_application.g_f09. COUNTY

  loop

  (apex_debug.message('g_f09(%s): %s, i, apex_application.g_f09 (i));

  If l_first_value! = apex_application.g_f09 (i)

  then

  Returns false;

  end if;

  end loop;

  Returns true;

  end;

  Returns a null value. end; begin wwv_flow.g_boolean: = x; end;

  4

  28%

  0.09769

  0.00005

  g_f09 (1): TEST2

  4

  0%

  0.09773

  0.00010

  g_f09 (2): TEST

  4

  0%

  0.09783

  0,00003

  ...... Result = false

  4

  0%

  0.09786

  0.00004

  ...... Does NOT pass

  I created a new liquidation which uses the correct column, but at some point the validation passes and data, so I didn't get a chance to conduct tests.

• Problem with abnormal analysis result of the Avid 7

  Hello

  Im working on an exported AAF sequence from Avid, I imported it throught importer pro (im on CS6) like 'create movies of Quick Time reference to the avid media files' (flatten movie reference disabled)

  It's okay... the problem is as soon as I left AE, I can't open my project again! Before he stopped at 95% of loading, or 2%, and now just AE down while Im trying to import... Why?

  It's a problem with the anti-icing fluid, because some new plugins (optical flare) installed. I can't just start again all the time!

  Thanks for the tips

  IM on Windows 7

  Vincent

  Hello.

  Thank you. I already tried what you suggest Dave, did not work for me, the problem was something else.

  I finally found the answer on another forum a few days ago.

  I had to go to preferences > media & Disk Cache > uncheck "write XMP IDs files...". ' and 'create layer markers... '. "and instead using Pro Import to import AAF just by dragging in AE and everything worked like a charm.

  I heard that his best drag AAF directly in AE.

• Major problems with Premiere CS4

  Hello!
  
  I have big problems with CS4. I recently bought a new computer - essentials are as follows:
  
  Intel Core i7 920 2.66 GHz
  2 x Kingston 3x2GB DDR3 1333 MHz (= 12 GB of RAM)
  ATI Radeon HD 5770 v2
  ASUS P6T SE, LGA1366, X 58, ATX, DDR3
  2 x 500 GB 7200.12 Barracuda (RAID1), system disk
  2 x 1 TB Barracuda 7200.12, diskettes
  Windows 7 Pro 64-bit
  Adobe CS4 Production Premium + latest updates
  
  The problem I have has mainly to do with the first although I think that the rest of the Production Premium software should be run better on this computer as well.
  
  To start, I was very disappointed when I couldn't see a single HD sequence of the first timeline (it was a rip .m2ts to a Bluray disc previously burned Self) at all. The rendering is very slow and even after that the video does not normally, showing a few individual frames per second. When I point the chronology to a certain place, it takes several seconds up to what even this same image is displayed in the monitor window.
  
  And that's not all - I decided to try with a DV AVI basic clip, previously captured with my organization of 1.5 on my previous computer (3.2 ghz Pentium 2005). Is a native file, so there is no need even made and still the same problem occurs. With normal playback only about 6-10 frames are shown per second. That is absolutely ridiculous - even my laptop in 2004 is more fluid DV AVI with 1.5 of the body.
  
  While I run the first, the RAM level used is only up about 24 percent. The processor comes here again, nearly a hundred when you press play on the timeline.
  
  I did have these huge problems with other Production Premium software (though as I said, I think they should run faster as well). Otherwise, the computer works well.
  
  One of my friends pointed out that the graphics card I use is not on the list of the Adobe Web site to those supported with first, but AFAIK, it should not even be a problem of graphics card with these machines high-end.
  
  -Of course I could use few help and ideas on how to get the creative work. My main goal for the purchase of a new computer and Adobe CS4 Production Premium was to begin editing HD after all! Thanks in advance!

  Dennis has already been said, your system is powerful enough to easily manage DV and HDV formats. The fact that it is not, even with all the latest drivers installed means something is installed in the past is corrupt things. When even to kill all these processes does not help, I would go for the radical solution. Disable the CS4. Do a complete new installation of Win7, install CS4, acivate and apply all updates. Then try again. It should work without problem. If so, create a restore point, and then add other applications such as Cyberlink. If it still works, do a new restore point and proceed with the installation of other applications. In this way, if you install an application that has been the cause of your current problem, you can go to a previous restore point.

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.