Problem with FPS... Acer 5755G

Similar Questions

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Problem with the Acer, c/o Windows 7 laptop installed with the loading games

  I'm having a problem with Windows 7 which is preinstalled on a laptop Acer Aspire. Unless the laptop is on battery to 100% or pluged, games does not load upward. Because it is preinstalled serial numbers are not match so I can't get help from M/S.  Acer says it's a software problem.  Any suggestions?

  Hello

  a. What games you try to play?
  b. do you have this problem with all games or specific games?
  c. Since when are you facing this problem?

  You can also change the power on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Keep the battery power:

  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  You can also try to update the BIOS, for this you need to contact the manufacturer of the BIOS.
  Note: modification (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer
  to start properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of
  the settings are at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• E5 - 511 problem with touchpad Acer.

  Hello everyone. I have a problem with the touchpad when I slide my finger on it, pointer does not move smoothly, it is very laggy. When I connect to my mouse, it works fine and smooth. I tried to find solutions on here, but none of them worked. Any ideas? Operating system is Windows 8.1.

  It solved! Found solution here, thanks for the suggestions. Win8 uninstalled and installed again with UEFI boot.

• I have a problem with his Acer Aspire XC - 603 G - UW31 HDMI

  I have an Acer Aspire XC - 603 G-UW31.  The only way I can get HDMI audio when it is connected to the TV is with the default Microsoft drivers. Displys cardas graphics Intel HD graphics Windows.

  Display adapter = Microsoft Basic graphics card

  Sound, video controllers andgame = high definition Audio Device / Realtek High Definition Audio

  I tried every fix I can find on the internet, can not find one that works.  Even several different drivers.

  When I install all driver Intel or any driver on the acer site.  I lose the option for the Digital Audio (HDMI) devices read.

  Have a fix for this.

  Thank you

  Today I updated the Bios and it fixed the problem.

• Technical problems with my Acer :-(

  My Aspire M5 - 581T with Intel Core i5-331U @ 1.70 GHz & RAM 6.0 GB, 64-bit, is having some MAJOR PROBLEMS? I just bought the computer in 2012, and I've been VERY happy with it, but now I have problems. The computer turns off when pushed even if it is on? If you are working on something, you lose everything that was not justified when it stops, I also have problems it is turn on and sometimes it takes 5 or 6 attempts? Also, when I get to start my WIFI is not often connected and I need to restart the computer to log in again. Help! Someone of you have similar problems and if you were able to fix the problem.

  When you move your computer connected to your power adapter? The computer is running on battery alone?

  The internal battery is equipped with a safety device to cut the power at the opening of the envelope of the ultrabook. However, if some of the screws are loose, it can trigger this precaution by mistake. If you encounter this problem, try to tighten the screws on the bottom of the laptop.

  If the problem persists, then you may have another problem and recommend to contact technical support in your region.

  Regarding your concern about Wifi, it may be a software conflict and recommend updating the driver, then forget your network. After having erased the your system network, re-scan and configure your network again. If this fails, try a factory restore as there may be a software conflict.

• Problem with my acer aspire 5750G

  Hello, good afternoon.

  My problem is that when you turn on the laptop. My monitor shows no sign or there is activity on the hard disk.

  I tried to remove the ram, HDD, the bios battery, connect it to an hdmi TV and still no sign of life.

  I think it's maybe corrupt bios. ¿Steps? Suggestions? help please!

  Sorry for my English (google translate)

  Thank you!

  From your first post, I thought you said when you tried to turn it on nothing happened.

  If it stays on when the memory is removed, but stop with installed, you may have a bad memory dimm. If you have 2 DIMM, try to start with one, then the other.

• problem with my acer Liquid Z3

  My liquid Z3 has been rather unstable lately take variable time to restart. He said flashing the signal < process="" system="" isn't="" responding=""> but finally managed to start.

  Since putting it in airplane mode today, what it doesn't start at all, just flashing the message already stated.

  Any ideas?

  I think you need to do a factory reset (you will lose all your personal data):

  Hard reset - factory reset:

  (1) go to the control panel

  (2) save & reset

  (3) reset to factory

  Hard reset - recovery mode

  (1) power off the device

  2) FLIGHT-press + and the Start button / stop

  (3) select menu recovery

  (4) it displays a screen with "NO order".

  5) press the power button / stop

  (6) select wipe data / factory reset

  (7) when the erase is done, restart

• I have a DATE TIME / CMOS / BIOS with my Acer Aspire 5742Z problem

  Hello

  Newbie here...

  I have a strange problem with my Acer Aspire 5742Z (UK), which I think may be the BIOS or CMOS area...

  MAIN PROBLEM

  Guard reset BIOS default time (00: 00:00 on 01/01/2009)... OR... a time '' close '' to what it is supposed to be...

  MAIN STEPS IN THE DEMONSTRATION OF THE ISSUE...  WHAT I'VE DONE

  Removed the main battery and then replaced the CMOS battery twice (in the case of a failure)

  Main battery insert it again.

  The clocks of the BIOS (using F2) countless times, but there's rarely / or is correct.

  STRANGENESS...

  During startup in Windows 7, it almost always does not show the same date and time that I entered the BIOS.

  For example, if I go home at 21:35 on August 28, 2014 using F2, when I boot on Windows, the date and time may say August 23, 2014 at 3:25 pm ish...

  POWER OFF

  If I turn it off and turn off and then turn on, restart the time in BIOS is correct... to 21:43 29/08/2014 (that I have record for good measure).

  If I continue, Windows reads now August 23 at 15:32

  ADJUST the WINDOWS TIM E (UK)

  So, then I change the time of Windows Date to Friday, August 29, 2014 21:48.

  JUST FYI: the PARAMETERS of ZONE SCHEDULE are checked and no changes: (UTC), Dublin, Edinburgh, Lisbon, London

  PANEL, LANGUAGE AND REGION, English in the United Kingdom, short time 21:48, short Date: 29/08/2014

  GEOGRAPHICAL area: United Kingdom

  now, everything seems correct.

  TURN OFF AGAIN and wait a few minutes.

  YOU turn it back ON, and then press F2 that (this time) shows the BIOS default date and time in 2009

  If I continue in windows without changing the BIOS date and time dafault, Windows now displays as 23:02 31/12/2008

  :-(

  That's all.

  I would really appreciate help fixing this problem that makes me nuts!

  Thanks in advance!

  ...   Just in case anyone reads this...

  I just updated my BIOS for the next issue, and the problem has.

  I guess that maybe the BIOS got corrupted!

  I used the simple approach and no short layout has been involved.  I deliberately did not go for the latest BIOS just in case where he brought new questions and confused the situation.

  Shaba

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• BSOD BAD_POOL_CALLER error with my acer E1 - 572G laptop computer running Windows 8

  Hello

  Nice day

  I also have a problem with my acer E1 - 572G laptop computer running Windows 8.

  Only during the restart of my laptop, it's always show the BAD_POOL_CALLER error code

  and a blue screen.

  She does whenever I want to restart. Stop and then put on now displays errors.

  I encountered this error several times.

  I downloaded the minidump files.

  The link to the files is:

  https://www.mediafire.com/folder/3nn883rs78p4qqe,bfcx73m2a3dodp6,edk1ebfdmezdakt,ce7mbir7enbznjr,qzdxpddiurioywy,mctv8lmlptdr86t,aae9dt4xxhwkq36,4ncglnqhedwuwnp,vjaejk18xob2b2w,03cjeaaanxyfs6a,ltrnk3oh4jq3e00,v2l8kyaawhnyluq,ttt1t5obw5gcayc,8oobh626v64sp0h,wmkwawbugww12et,qgrrwp1xrp3w2yk/shared

  Kindly let me know if all minidump files all belong to the same problem.

  Please please help me.

  Kind regards

  Ashaikhd

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/badpoolcaller-BSOD/202df5d4-b74c-4489-b773-ac40e286aec7

  These were related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation in conflict with your two applications of malicious software.  I remove both (the Defender built in use) and install the latest broadcom driver available, even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070514-45203-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9600.17085.amd64fre.winblue_gdr.140330 - 1035
  Computer name:
  Kernel base = 0xfffff800 'f1e05000 PsLoadedModuleList = 0xfffff800' f20cf2d0
  The debugging session: Fri Jul 4 20:21:13.557 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:20.332
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck C2, {7, 1200, 247c894c, fffff801d2f6a733}

  WARNING: Unable to verify timestamp for bScsiSDa.sys
  ERROR: Module load completed but symbols can be loaded for bScsiSDa.sys
  Probably caused by: bScsiSDa.sys (bScsiSDa + e656)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  BAD_POOL_CALLER (c2)
  The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
  Arguments:
  Arg1: 0000000000000007, attempt to free pool which was already freed
  Arg2: 0000000000001200, (reserved)
  Arg3: blocking content from the memory of the 00000000247c894c pool.
  Arg4: fffff801d2f6a733, address of the block of pool is released

  Debugging information:
  ------------------

  BUGCHECK_STR: 0xc2_7

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff800f209b42a to fffff800f1f58fa0

  STACK_TEXT:
  ffffd000 '784b26a8 fffff800' f209b42a: 00000000'000000 c 2 00000000'00000007 00000000'00001200 00000000' 247c894c: nt! KeBugCheckEx
  ffffd000 '784b26b0 fffff800' f2253ee8: fffff800 'f20a8300 00000000' 00000082 ffffd000 '784b27a8 fffff800' f1e35711: nt! ExFreePoolWithTag + 0x114a
  ffffd000 '784b 2780 fffff801' d2f6a656: 00000030' ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 00000000 b 784, 2910: nt! RtlFreeUnicodeString + 0x18
  ffffd000 '784b27b0 00000000' 00000030: ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 784b 2910 00000000 00000000': bScsiSDa + 0xe656
  ' ffffd000 '784b27b8 ffffe001' d7fcfaa0: 00000000 ' ffffd000 00000000 ' 784b 2910 00000000 00000000' 00000000': 0 x 30 fffff800
  ffffd000'784b27c0 00000000' 00000000: ffffd000' 784b 2910 00000000 00000000' fffff800'00000000 00000000 00000000': 0xffffe001'd7fcfaa0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  bScsiSDa + e656
  fffff801'd2f6a656 488b8df0000000 mov rcx, qword ptr [rbp + 0F0h]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: bScsiSDa + e656

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: bScsiSDa

  Nom_image: bScsiSDa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51e9aefb

  FAILURE_BUCKET_ID: 0xc2_7_bScsiSDa + e656

  BUCKET_ID: 0xc2_7_bScsiSDa + e656

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xc2_7_bscsisda + e656

  FAILURE_ID_HASH: {cff94011-1a4c-5d32-9ebb-2de22db811dd}

  Follow-up: MachineOwner
  ---------

• My dear friends, I have Acer s2oo smart phone. I have a big problem with it

  My dear friens, I have an Acer s 200 smartphone. I used it for many years. but now I have a big problem with it. Dears when I turn it on it is the acer logo appears on the screen, but then it keeps this process. I mean after 5 or 6 hours, when I look at my phone always logo Asher on the screen never turn off or work. then I have it connected to my computer in order to re program the windows installation, but my computer does not connect to it. My dear please help me

  How can I get it back. What kind of program will help connect my computer. If such a program exists please could you give me the link of it for download. Please help me. Take care.

  Wow this is a very old smartphone

  I suggest you take a look at this forum to find some tools useful/rom:

  http://Forum.xda-developers.com/Acer-F1

  Here you can find some ROMs to use to try to repair your S200:

  FTP://FTP.Acer-euro.com/Smartphone/S200/os_images/

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.