problem with my acer Liquid Z3

Similar Questions

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Problem with the Acer, c/o Windows 7 laptop installed with the loading games

  I'm having a problem with Windows 7 which is preinstalled on a laptop Acer Aspire. Unless the laptop is on battery to 100% or pluged, games does not load upward. Because it is preinstalled serial numbers are not match so I can't get help from M/S.  Acer says it's a software problem.  Any suggestions?

  Hello

  a. What games you try to play?
  b. do you have this problem with all games or specific games?
  c. Since when are you facing this problem?

  You can also change the power on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Keep the battery power:

  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  You can also try to update the BIOS, for this you need to contact the manufacturer of the BIOS.
  Note: modification (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer
  to start properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of
  the settings are at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

  Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).

  My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.

  I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!

  Any help?

  Thank you very much!

  This isn't the audio chipset of this system, which I listed above.

  The audio chipset to send the data in 5.1 surround.  The HDMI port would support, if it was sent.

  It is not sent in this way, I listed above.

• E5 - 511 problem with touchpad Acer.

  Hello everyone. I have a problem with the touchpad when I slide my finger on it, pointer does not move smoothly, it is very laggy. When I connect to my mouse, it works fine and smooth. I tried to find solutions on here, but none of them worked. Any ideas? Operating system is Windows 8.1.

  It solved! Found solution here, thanks for the suggestions. Win8 uninstalled and installed again with UEFI boot.

• I have a problem with his Acer Aspire XC - 603 G - UW31 HDMI

  I have an Acer Aspire XC - 603 G-UW31.  The only way I can get HDMI audio when it is connected to the TV is with the default Microsoft drivers. Displys cardas graphics Intel HD graphics Windows.

  Display adapter = Microsoft Basic graphics card

  Sound, video controllers andgame = high definition Audio Device / Realtek High Definition Audio

  I tried every fix I can find on the internet, can not find one that works.  Even several different drivers.

  When I install all driver Intel or any driver on the acer site.  I lose the option for the Digital Audio (HDMI) devices read.

  Have a fix for this.

  Thank you

  Today I updated the Bios and it fixed the problem.

• Technical problems with my Acer :-(

  My Aspire M5 - 581T with Intel Core i5-331U @ 1.70 GHz & RAM 6.0 GB, 64-bit, is having some MAJOR PROBLEMS? I just bought the computer in 2012, and I've been VERY happy with it, but now I have problems. The computer turns off when pushed even if it is on? If you are working on something, you lose everything that was not justified when it stops, I also have problems it is turn on and sometimes it takes 5 or 6 attempts? Also, when I get to start my WIFI is not often connected and I need to restart the computer to log in again. Help! Someone of you have similar problems and if you were able to fix the problem.

  When you move your computer connected to your power adapter? The computer is running on battery alone?

  The internal battery is equipped with a safety device to cut the power at the opening of the envelope of the ultrabook. However, if some of the screws are loose, it can trigger this precaution by mistake. If you encounter this problem, try to tighten the screws on the bottom of the laptop.

  If the problem persists, then you may have another problem and recommend to contact technical support in your region.

  Regarding your concern about Wifi, it may be a software conflict and recommend updating the driver, then forget your network. After having erased the your system network, re-scan and configure your network again. If this fails, try a factory restore as there may be a software conflict.

• Problem with my acer aspire 5750G

  Hello, good afternoon.

  My problem is that when you turn on the laptop. My monitor shows no sign or there is activity on the hard disk.

  I tried to remove the ram, HDD, the bios battery, connect it to an hdmi TV and still no sign of life.

  I think it's maybe corrupt bios. ¿Steps? Suggestions? help please!

  Sorry for my English (google translate)

  Thank you!

  From your first post, I thought you said when you tried to turn it on nothing happened.

  If it stays on when the memory is removed, but stop with installed, you may have a bad memory dimm. If you have 2 DIMM, try to start with one, then the other.

• problem with loop module_data liquid with if statement

  I'm having a problem to the below statement inside the loop function for. I works very well outside the loop on a single post, but don't seem to take the entitlement when inside.

  {module_data resources = "blogposts' version ="v3"field model = 'PostFeaturedImage, release to id Date, postTitle, postBody,' =" "order =" "-id" limit = "5" skip = '3' = 'blogPosts' collection}

  {% for section in blogPosts.items%}

  {% If item.postFeaturedImage == "" %}}

  {% assign item.postFeaturedImage = ' / _assets/img/default_blog_picture.jpg '-%}

  {% endif %}

  < div class = "row" >

  < div class = "great-4 columns" >

  < p > < a href = "{{item.postUrl}}" title = "Read more" > < img src = "{{item.postFeaturedImage}}? Action = thumbnail & width = 1200 & height = 600 & algorithm = fill_proportional"alt ="{{item.postTitle}}"/ > < /a > < /p >

  < / div >

  < div class = "big-8 columns" >

  < h5 > < a href = "{{item.postUrl}}" title = "{{item.postTitle}}" > {{item.postTitle: capitalize}} < /a > < / h5 >

  < p > {{item.releaseDate | date: "dddd, MMMM yyyy"}} {{item.CAT}} < /p >

  < p > {{item.postBody | truncate: 220}} < /p >

  < a href = '{{item.postUrl}}' class 'more' = > read more < class i 'icon-angle-right' = > < / i > < / a >

  < / div >

  < / div >

  < hr >

  {% endfor %}

  Thanks in advance for any input.

  Not to assign the same name value.

  Assign a value with a new image name recommended before the, then this name within the FI, or just do an else if.

  {% If item.postFeaturedImage == ""-%}

  {% assign itemImage = ' / _assets/img/default_blog_picture.jpg '-%}

  {%-%}

  {assign = item.postFeaturedImage-% itemImage %}

  {endif %}

  {{itemImage}} to your image

• Right icon name becomes/strange/weird not Acer Liquid X 1

  Hi Acer and users,

  I have this problem with my Acer Liquid X 1.

  Sometimes the icon phone naming appearance becomes strange.

  For example Google + becomes G...

  Sometimes, some extend the appellation of the correct icon.

  It is very annoying

  One undergoes this kind of question or one to solve this problem?

  Here are the screenshots of what I'm talking about.

  It is a screenshot when sometimes the designation of icon is good.

  The second screenshot shows a messed up icon naming.
  

  Thanks for the answer iron fly.

  I think you're right that the problem is with the Acer theme/launcher. I tested with the help of a third party, and the problem disappeared completely.

  Acer would kindly fix this issue because I don't really like using third party ui/themes/Launcher. It's just not natural for me.

• Acer Liquid E2 Duo: Problem of storage. How?

  Hello

  I have a storage problem on my Acer Liquid E2 Duo. Because of my previous phone experience that I thought 4 GB internal memory was enough, but it's not good I moved all the applications that I could to the SD card.

  Here's what I see in 'Settings'-> 'storage '.

  1. Storage internal-> size-> free 50 MB 2.35 GB
  2. -> Card SD size 32 GB-> GB of free 22
  3. Storage-> phone size 1.6 GB-> GB 1.6 free

  If "Internal storage" + 'Phone storage' are by default 4 GB to come with the phone.
  But obviously NO application go to the "storage of phone" so I run out of space in "internal memory". Why?

  In addition many to come with the OS ' default ' apps (and that I do NOT like Facebook, etc...) are not INSTALLABLE (I tried it only turn them off) and no MOBILE SD card (option is grayed out).

  So in summary: I have run out of space in "Internal memory" with many not removable applications and while the 'storage phone' is not used, I have plenty of space on the SD card but I can not move the default applications default on that...

  If anyone has the answers...
  THX
  T.

  Hi all, for some time now, I've provided workaround for this "storage solution" issued by PM and Acer have been generous enough to allow me to do.

  However, things got a lot better now and I am extremely grateful to Acer that will allow me to send a link to workaround and make it a sticky so that nobody has to PM me longer for it.

  Acer will add their own words at this, but let me say that although the 'process/script"is very well written (ahem!), it is not for novices and you will need to understand some parts of your phone, along the TSF, some may be new terminology and jargon.

  And of course, it is at your own risk. You decide for yourself the positive feedback in this thread about whether it is worth to continue. That being said, here is the link to my instructions as to how you can repartition the storage:

  Link to instructions contained in a zip file with two files

  Once again, thanks to Acer to enable this.

• I have a DATE TIME / CMOS / BIOS with my Acer Aspire 5742Z problem

  Hello

  Newbie here...

  I have a strange problem with my Acer Aspire 5742Z (UK), which I think may be the BIOS or CMOS area...

  MAIN PROBLEM

  Guard reset BIOS default time (00: 00:00 on 01/01/2009)... OR... a time '' close '' to what it is supposed to be...

  MAIN STEPS IN THE DEMONSTRATION OF THE ISSUE...  WHAT I'VE DONE

  Removed the main battery and then replaced the CMOS battery twice (in the case of a failure)

  Main battery insert it again.

  The clocks of the BIOS (using F2) countless times, but there's rarely / or is correct.

  STRANGENESS...

  During startup in Windows 7, it almost always does not show the same date and time that I entered the BIOS.

  For example, if I go home at 21:35 on August 28, 2014 using F2, when I boot on Windows, the date and time may say August 23, 2014 at 3:25 pm ish...

  POWER OFF

  If I turn it off and turn off and then turn on, restart the time in BIOS is correct... to 21:43 29/08/2014 (that I have record for good measure).

  If I continue, Windows reads now August 23 at 15:32

  ADJUST the WINDOWS TIM E (UK)

  So, then I change the time of Windows Date to Friday, August 29, 2014 21:48.

  JUST FYI: the PARAMETERS of ZONE SCHEDULE are checked and no changes: (UTC), Dublin, Edinburgh, Lisbon, London

  PANEL, LANGUAGE AND REGION, English in the United Kingdom, short time 21:48, short Date: 29/08/2014

  GEOGRAPHICAL area: United Kingdom

  now, everything seems correct.

  TURN OFF AGAIN and wait a few minutes.

  YOU turn it back ON, and then press F2 that (this time) shows the BIOS default date and time in 2009

  If I continue in windows without changing the BIOS date and time dafault, Windows now displays as 23:02 31/12/2008

  :-(

  That's all.

  I would really appreciate help fixing this problem that makes me nuts!

  Thanks in advance!

  ...   Just in case anyone reads this...

  I just updated my BIOS for the next issue, and the problem has.

  I guess that maybe the BIOS got corrupted!

  I used the simple approach and no short layout has been involved.  I deliberately did not go for the latest BIOS just in case where he brought new questions and confused the situation.

  Shaba

• Acer liquid E2 can vibrate off the coast in silent mode

  Hi guys,.

  I have problems with my acer E2 liquid. I can not turn the haptic feedback off when I'm in silent mode.

  In settings > sounds > vibrate is turned off

  also in settings > language and input > android keyboard > vibrate on keypress is off.

  When I'm in silent mode, the bottom 3 buttons (back, home, menu) keep giving haptic and unlocking the screen. When I'm not in silent mode, all the vibrations are disabled.

  It's very awkward meetings, because vibrations are some noise.

  I hope you can help me with this problem.

  Kind regards

  Karen

  Hi Karen,.

  I had the same problem. It doesn't seem to be an option in the settings of the phone, but if you download profile Scheduler App, you can turn haptic phone in all of audio profiles. I hope this helps.

  Kind regards

  Andy

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• BSOD BAD_POOL_CALLER error with my acer E1 - 572G laptop computer running Windows 8

  Hello

  Nice day

  I also have a problem with my acer E1 - 572G laptop computer running Windows 8.

  Only during the restart of my laptop, it's always show the BAD_POOL_CALLER error code

  and a blue screen.

  She does whenever I want to restart. Stop and then put on now displays errors.

  I encountered this error several times.

  I downloaded the minidump files.

  The link to the files is:

  https://www.mediafire.com/folder/3nn883rs78p4qqe,bfcx73m2a3dodp6,edk1ebfdmezdakt,ce7mbir7enbznjr,qzdxpddiurioywy,mctv8lmlptdr86t,aae9dt4xxhwkq36,4ncglnqhedwuwnp,vjaejk18xob2b2w,03cjeaaanxyfs6a,ltrnk3oh4jq3e00,v2l8kyaawhnyluq,ttt1t5obw5gcayc,8oobh626v64sp0h,wmkwawbugww12et,qgrrwp1xrp3w2yk/shared

  Kindly let me know if all minidump files all belong to the same problem.

  Please please help me.

  Kind regards

  Ashaikhd

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/badpoolcaller-BSOD/202df5d4-b74c-4489-b773-ac40e286aec7

  These were related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation in conflict with your two applications of malicious software.  I remove both (the Defender built in use) and install the latest broadcom driver available, even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070514-45203-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9600.17085.amd64fre.winblue_gdr.140330 - 1035
  Computer name:
  Kernel base = 0xfffff800 'f1e05000 PsLoadedModuleList = 0xfffff800' f20cf2d0
  The debugging session: Fri Jul 4 20:21:13.557 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:20.332
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck C2, {7, 1200, 247c894c, fffff801d2f6a733}

  WARNING: Unable to verify timestamp for bScsiSDa.sys
  ERROR: Module load completed but symbols can be loaded for bScsiSDa.sys
  Probably caused by: bScsiSDa.sys (bScsiSDa + e656)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  BAD_POOL_CALLER (c2)
  The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
  Arguments:
  Arg1: 0000000000000007, attempt to free pool which was already freed
  Arg2: 0000000000001200, (reserved)
  Arg3: blocking content from the memory of the 00000000247c894c pool.
  Arg4: fffff801d2f6a733, address of the block of pool is released

  Debugging information:
  ------------------

  BUGCHECK_STR: 0xc2_7

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff800f209b42a to fffff800f1f58fa0

  STACK_TEXT:
  ffffd000 '784b26a8 fffff800' f209b42a: 00000000'000000 c 2 00000000'00000007 00000000'00001200 00000000' 247c894c: nt! KeBugCheckEx
  ffffd000 '784b26b0 fffff800' f2253ee8: fffff800 'f20a8300 00000000' 00000082 ffffd000 '784b27a8 fffff800' f1e35711: nt! ExFreePoolWithTag + 0x114a
  ffffd000 '784b 2780 fffff801' d2f6a656: 00000030' ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 00000000 b 784, 2910: nt! RtlFreeUnicodeString + 0x18
  ffffd000 '784b27b0 00000000' 00000030: ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 784b 2910 00000000 00000000': bScsiSDa + 0xe656
  ' ffffd000 '784b27b8 ffffe001' d7fcfaa0: 00000000 ' ffffd000 00000000 ' 784b 2910 00000000 00000000' 00000000': 0 x 30 fffff800
  ffffd000'784b27c0 00000000' 00000000: ffffd000' 784b 2910 00000000 00000000' fffff800'00000000 00000000 00000000': 0xffffe001'd7fcfaa0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  bScsiSDa + e656
  fffff801'd2f6a656 488b8df0000000 mov rcx, qword ptr [rbp + 0F0h]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: bScsiSDa + e656

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: bScsiSDa

  Nom_image: bScsiSDa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51e9aefb

  FAILURE_BUCKET_ID: 0xc2_7_bScsiSDa + e656

  BUCKET_ID: 0xc2_7_bScsiSDa + e656

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xc2_7_bscsisda + e656

  FAILURE_ID_HASH: {cff94011-1a4c-5d32-9ebb-2de22db811dd}

  Follow-up: MachineOwner
  ---------