Problem with GPS in very remote locations...

Hello

I recently went to some remote areas of Western Australia. My phone is an old 4S running 9.3.5

In these remote areas, I had either no reception iphone mobile, or the receipt of another carrier (to what I had) so all the

I could get is SOS capacity in these areas.

The GPS of the iphone did not work (location services). I got iphone apps preloaded for the trip, but because the GPS does not work I could not use them. It is, has it been fixed for iphones later, or do you need always mobile reception to get the GPS to work?

Dissapointingly, I had to go back to my old windows phone where the GPS worked. The apps I had already downloaded for the iphone

and windows phone had full maps already downloaded (as they were the map apps) for the region, in that I was.

Thanks in advance. Stephen

What app?

This may be a limitation of the application in question against the GPS hardware in the phone.

Tags: iPhone

Similar Questions

Problems with itunes and can not locate network %APPDATA%/

I'm having a problem with trying to download itunes 10 because he repeats to me he couldn't locate network %APPDATA%/ when he tries to install quicktime with itunes 10 Installer. I can install quicktime very well, but even this will not fix the itunes 10 installation problems.

I had installed on my computer since then two games and work very well. The other could not install correctly, but the appdata question had nothing to do with it.

I use windows vista Basic.

Hello

Follow the information from apple to the link below

Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

http://support.Apple.com/kb/HT1923

and or ask for their support of itunes

http://www.Apple.com/support/iTunes/

Also try the discussions of apple itunes

http://discussions.Apple.com/category.jspa?categoryID=149

Some problems with Qosmio G30-179 - remote and TV

Hello, (I am French and my English is bad)

I have a Qosmio G30-179 and I can't use my remote when the computer's power on. But I can use the remote to turn on my computer and I can use it when I use the TV and media keys (on the right of the power button).

Another problem: I get nothing when I search for a signal TV on Media player. Even if I'm in a place where I already receive all TV channels. Maybe they had some problems undetected...

All these functions have already worked and I realized that they do not work there is little time. But I don't use them for a long time, since I have received my computer, when he came back guaranteed (I send them because he had a problem in the bars of RAM.)

Then, I think that there was a problem with the service. But I'm not sure.

What do you think about this? Should I call them?
Or this problem can be easily resolved?
Thank you in advance.

In this case, it is really not easy to give advice quite simply. If you are looking for the simplest solution I recommend you save all your data and install OS using recovery DVDs. After that make this laptop will have factory again and I hope that it will work as before.

Good bye

Problems with the work computer remote desktop connection

I used the remote desktop for VPN connections to work for a few years. My new employer has a Sonic Wall VPN. My home PC is running XP. The work computer is Windows 7. I activated the remote on this computer connectivity. I can connect to the VPN with a number. Remote Desktop detects the computer to work without problems as well. When I try to signon with my valid credentials, I get a message that my ID or password is invalid. By using the same credentials locally everything works perfectly. I tried to connect with my user disconnected and connected in the workplace with no difference in results. Any thoughts there?

Hi DougH_50,

Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

Problems with GPS signal/slot

Hello

I try to get GPS information for my application. I did a class to do so.

#ifndef GPSHANDLER_H_
#define GPSHANDLER_H_

#include 

#include 

#include 
#include 
#include 

using namespace QtMobilitySubset;

class GPShandler : public QObject{
    Q_OBJECT
public:
    GPShandler(QObject* parent);
    virtual ~GPShandler();
private Q_SLOTS:
    void positionUpdatedSlot(const QGeoPositionInfo &geoInfo);

public:
    void start();

    void stop();

    double Latitude();

    double Longitude();

private:
    double mGeoInfoLat;
    double mGeoInfoLong;
    QGeoPositionInfoSource *mGeo;
};
#endif /* GPSHANDLER_H_ */

#include "GPShandler.h"

GPShandler::GPShandler(QObject* parent)
: QObject(parent) {
    mGeoInfoLat = 0;
    mGeoInfoLong = 0;
    mGeo = QGeoPositionInfoSource::createDefaultSource(this);
    if (mGeo) {
        bool checkval = connect(mGeo, SIGNAL(positionUpdated(const QGeoPositionInfo &)), this,
                SLOT(positionUpdatedSlot(const QGeoPositionInfo &)));

        mGeo->setPreferredPositioningMethods(QGeoPositionInfoSource::SatellitePositioningMethods);
        mGeo->setUpdateInterval(1000);

        //checkval = mGeo->setProperty("backgroundMode", true);
        //int i = 3;
    }
}

GPShandler::~GPShandler() {
    // TODO Auto-generated destructor stub
}

void GPShandler::positionUpdatedSlot(const QGeoPositionInfo &geoInfo) {
    // Here's where you can do something with the device's position
    mGeoInfoLat = geoInfo.coordinate().latitude();
    mGeoInfoLong = geoInfo.coordinate().longitude();
}

void GPShandler::start()
{
    mGeo->startUpdates();
}

void GPShandler::stop()
{
    mGeo->stopUpdates();
}

double GPShandler::Latitude()
{
    return mGeoInfoLat;
}

double GPShandler::Longitude()
{
    return mGeoInfoLong;
}

As you can see I have connected the signal postionUpdate() of QGeo class that I use for the positionUpdatedSlot() of the slot. I use the class as follows:

Pop = new GPShandler (this);

void::startTimer() {} App

Pop-> start();

}
void::stopTimer() {} App

Pop-> stop();

}

which are called when a key is pressed. However, the positionUpdatedSlot() of slot function is never called. I have debugged in my code and cannot find the problem. I can confirm the work of connection (function returns true), and that presented startup and shutdown functions are called as expected. Is there a reason why my slot machine function is not called?

Note: I have another implementation of signal/slot in this app:

Connect (mTimer, SIGNAL (timeout ()), this, SLOT (update ()));

and it works very well.

Thank you

Gerry

I do not know which of the following has solved my problem, but in any case, it's working now after doing these things:

1. give permission to app to device identification information. (I had already given GPS, but examples also being device identifying information I thought I'd try that)

2. remove the line:

       mGeo>setPreferredPositioningMethods(QGeoPositionInfoSource::SatellitePositioningMethods);

as an example, I created using this example: http://blackberry.github.com/Cascades-Samples/geo-locationdiagnostics.html did not have this line

Problem with ASA 5505 VPN remote access

After about 1 year to have the VPN Client from Cisco connection to an ASA 5505 with no problems, all of a sudden one day it stops working. The customer is able to get a connection to the ASA and browse the local network for only about 30 seconds after the connection. After that, no access is available to the network behind the ASA. I have tried everything I can think of to try to solve the problem, but at this point, I'm just banging my head against a wall. Anyone know what could cause this?

Here is the cfg running of the ASA

----------------------------------------------------------------------------------------

: Saved

:

ASA Version 8.4 (1)

!

hostname NCHCO

enable encrypted password xxxxxxxxxxxxxxx

xxxxxxxxxxx encrypted passwd

names of

description of NCHCO name 192.168.2.0 City offices

name 192.168.2.80 VPN_End

name 192.168.2.70 VPN_Start

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.2.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address **. ***. 255.255.255.248

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

boot system Disk0: / asa841 - k8.bin

passive FTP mode

network of the NCHCO object

Subnet 192.168.2.0 255.255.255.0

network object obj - 192.168.1.0

subnet 192.168.1.0 255.255.255.0

network object obj - 192.168.2.64

subnet 192.168.2.64 255.255.255.224

network object obj - 0.0.0.0

subnet 0.0.0.0 255.255.255.0

network obj_any object

subnet 0.0.0.0 0.0.0.0

the Web server object network

the FINX object network

Home 192.168.2.11

rdp service object

source between 1-65535 destination eq 3389 tcp service

Rdp description

outside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

outside_nat0_outbound extended access list permit ip object NCHCO 192.168.2.0 255.255.255.0

inside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224

permit access list extended ip 0.0.0.0 inside_nat0_outbound 255.255.255.0 192.168.2.64 255.255.255.224

outside_1_cryptomap extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

outside_1_cryptomap_1 extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

LAN_Access list standard access allowed 192.168.2.0 255.255.255.0

LAN_Access list standard access allowed 0.0.0.0 255.255.255.0

NCHCO_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0

AnyConnect_Client_Local_Print deny ip extended access list a whole

AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

outside_access_in list extended access permit tcp any object FINX eq 3389

outside_access_in_1 list extended access allowed object rdp any object FINX

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 649.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, all) static source NCHCO destination NCHCO static obj - 192.168.1.0 obj - 192.168.1.0

NAT (inside, all) static source any any destination static obj - 192.168.2.64 obj - 192.168.2.64

NAT (inside, all) source static obj - 0.0.0.0 0.0.0.0 - obj destination static obj - 192.168.2.64 obj - 192.168.2.64

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

the FINX object network

NAT (inside, outside) interface static service tcp 3389 3389

Access-group outside_access_in_1 in interface outside

Route outside 0.0.0.0 0.0.0.0 69.61.228.177 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

network-acl outside_nat0_outbound

WebVPN

SVC request to enable default svc

Enable http server

http 192.168.1.0 255.255.255.0 inside

http *. **. ***. 255.255.255.255 outside

http *. **. ***. 255.255.255.255 outside

http NCHCO 255.255.255.0 inside

http 96.11.251.186 255.255.255.255 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 l2tp-transform

IKEv1 crypto ipsec transform-set l2tp-transformation mode transit

Crypto ipsec transform-set vpn-transform ikev1 esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1

transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1

Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5 ikev1

transport mode encryption ipsec transform-set TRANS_ESP_3DES_MD5 ikev1

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

crypto dynamic-map dyn-map 10 set pfs Group1

crypto dynamic-map dyn-map 10 set transform-set l2tp vpn-transform processing ikev1

dynamic-map encryption dyn-map 10 value reverse-road

Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1

Crypto-map dynamic outside_dyn_map 20 the value reverse-road

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs Group1

peer set card crypto outside_map 1 74.219.208.50

card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1

map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside crypto map inside_map interface

card crypto vpn-map 1 match address outside_1_cryptomap_1

card crypto vpn-card 1 set pfs Group1

set vpn-card crypto map peer 1 74.219.208.50

card crypto 1 set transform-set ESP-3DES-SHA ikev1 vpn-map

dynamic vpn-map 10 dyn-map ipsec isakmp crypto map

crypto isakmp identity address

Crypto ikev1 allow inside

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 10

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 15

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 35

preshared authentication

3des encryption

sha hash

Group 2

life 86400

enable client-implementation to date

Telnet 192.168.1.0 255.255.255.0 inside

Telnet NCHCO 255.255.255.0 inside

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH NCHCO 255.255.255.0 inside

SSH timeout 5

Console timeout 0

dhcpd address 192.168.2.150 - 192.168.2.225 inside

dhcpd dns 216.68.4.10 216.68.5.10 interface inside

lease interface 64000 dhcpd inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal DefaultRAGroup group strategy

attributes of Group Policy DefaultRAGroup

value of server DNS 192.168.2.1

L2TP ipsec VPN-tunnel-Protocol ikev1

nchco.local value by default-field

attributes of Group Policy DfltGrpPolicy

value of server DNS 192.168.2.1

L2TP ipsec VPN-tunnel-Protocol ikev1 ssl-clientless ssl-client

allow password-storage

enable IPSec-udp

enable dhcp Intercept 255.255.255.0

the address value VPN_Pool pools

internal NCHCO group policy

NCHCO group policy attributes

value of 192.168.2.1 DNS Server 8.8.8.8

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list NCHCO_splitTunnelAcl_1

value by default-field NCHCO.local

admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username

username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg

username NCHvpn99 password dhn. JzttvRmMbHsP encrypted

attributes global-tunnel-group DefaultRAGroup

address (inside) VPN_Pool pool

address pool VPN_Pool

authentication-server-group (inside) LOCAL

authentication-server-group (outside LOCAL)

LOCAL authority-server-group

authorization-server-group (inside) LOCAL

authorization-server-group (outside LOCAL)

Group Policy - by default-DefaultRAGroup

band-Kingdom

band-band

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

NOCHECK Peer-id-validate

tunnel-group DefaultRAGroup ppp-attributes

No chap authentication

no authentication ms-chap-v1

ms-chap-v2 authentication

tunnel-group DefaultWEBVPNGroup ppp-attributes

PAP Authentication

ms-chap-v2 authentication

tunnel-group 74.219.208.50 type ipsec-l2l

IPSec-attributes tunnel-group 74.219.208.50

IKEv1 pre-shared-key *.

type tunnel-group NCHCO remote access

attributes global-tunnel-group NCHCO

address pool VPN_Pool

Group Policy - by default-NCHCO

IPSec-attributes tunnel-group NCHCO

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:a2110206e1af06974c858fb40c6de2fc

: end

ASDM image disk0: / asdm - 649.bin

ASDM VPN_Start 255.255.255.255 inside location

ASDM VPN_End 255.255.255.255 inside location

don't allow no asdm history

---------------------------------------------------------------------------------------------------------------

And here are the logs of the Cisco VPN Client when sailing, then is unable to browse the network behind the ASA:

---------------------------------------------------------------------------------------------------------------

Cisco Systems VPN Client Version 5.0.07.0440

Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.

Customer type: Windows, Windows NT

Running: 6.1.7601 Service Pack 1

Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

1 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600026

Try to find a certificate using hash Serial.

2 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600027

Found a certificate using hash Serial.

3 09:44:55.693 01/10/13 Sev = Info/6 GUI/0x63B00011

RELOADED successfully certificates in all certificate stores.

4 09:45:02.802 10/01/13 Sev = Info/4 CM / 0 x 63100002

Start the login process

5 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100004

Establish a secure connection

6 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100024

Attempt to connect with the server "*." **. ***. *** »

7 09:45:02.802 10/01/13 Sev = Info/6 IKE/0x6300003B

Try to establish a connection with *. **. ***. ***.

8 09:45:02.818 10/01/13 Sev = Info/4 IKE / 0 x 63000001

From IKE Phase 1 negotiation

9 09:45:02.865 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***

10 09:45:02.896 10/01/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

11 09:45:02.896 10/01/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

12 09:45:02.896 10/01/13 Sev = Info/5 IKE / 0 x 63000001

Peer is a compatible peer Cisco-Unity

13 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports XAUTH

14 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports the DPD

15 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports NAT - T

16 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports fragmentation IKE payloads

17 09:45:02.927 01/10/13 Sev = Info/6 IKE / 0 x 63000001

IOS Vendor ID successful construction

18 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***

19 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000083

IKE port in use - Local Port = 0xDD3B, Remote Port = 0x01F4

20 09:45:02.927 01/10/13 Sev = Info/5 IKE / 0 x 63000072

Automatic NAT detection status:

Remote endpoint is NOT behind a NAT device

This effect is NOT behind a NAT device

21 09:45:02.927 01/10/13 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

22 09:45:02.943 10/01/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

23 09:45:02.943 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

24 09:45:02.943 01/10/13 Sev = Info/4 CM / 0 x 63100015

Launch application xAuth

25 09:45:03.037 01/10/13 Sev = Info/6 GUI/0x63B00012

Attributes of the authentication request is 6: 00.

26 09:45:03.037 01/10/13 Sev = Info/4 CM / 0 x 63100017

xAuth application returned

27 09:45:03.037 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

28 09:45:03.037 10/01/13 Sev = Info/4 IPSEC / 0 x 63700008

IPSec driver started successfully

29 09:45:03.037 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014

Remove all keys

30 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

31 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

32 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

33 09:45:03.083 01/10/13 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

34 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300005E

Customer address a request from firewall to hub

35 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

36 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

37 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="" **.**.***.***="" isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

38 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70

39 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0

40 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1

41 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8

42 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001

43 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001

44 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000F

SPLIT_NET #1

= 192.168.2.0 subnet

mask = 255.255.255.0

Protocol = 0

SRC port = 0

port dest = 0

45 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO.local

46 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_UDP_NAT_PORT, value = 0 x 00002710

47 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

48 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = 8.4 (1) Cisco systems, Inc. ASA5505 Version built by manufacturers on Tuesday, January 31, 11 02:11

49 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

50 09:45:03.146 01/10/13 Sev = Info/4 CM / 0 x 63100019

Data in mode Config received

51 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000056

Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0

52 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***

53 09:45:03.177 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

54 09:45:03.177 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

55 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000045

Answering MACHINE-LIFE notify has value of 86400 seconds

56 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000047

This SA was already alive for 1 second, expiration of adjustment to 86399 seconds now

57 09:45:03.193 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

58 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" qm="" *(hash,="" sa,="" non,="" id,="" id,="" notify:status_resp_lifetime)="" from="">

59 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000045

Answering MACHINE-LIFE notify is set to 28800 seconds

60 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK QM * (HASH) to *. **. ***. ***

61 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000059

IPsec Security Association of loading (MsgID = SPI OUTBOUND SPI INCOMING = 0x3EBEBFC5 0xAAAF4C1C = 967A3C93)

62 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000025

OUTGOING ESP SPI support: 0xAAAF4C1C

63 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000026

Charges INBOUND ESP SPI: 0x3EBEBFC5

64 09:45:03.193 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

65 09:45:03.521 01/10/13 Sev = Info/6 CVPND / 0 x 63400001

Launch VAInst64 for controlling IPSec virtual card

66 09:45:03.896 01/10/13 Sev = Info/4 CM / 0 x 63100034

The virtual card has been activated:

IP=192.168.2.70/255.255.255.0

DNS = 192.168.2.1, 8.8.8.8

WINS = 0.0.0.0 0.0.0.0

Domain = NCHCO.local

Split = DNS names

67 09:45:03.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 0.0.0.0 0.0.0.0 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 0.0.0.0 0.0.0.0 261

68 09:45:07.912 01/10/13 Sev = Info/4 CM / 0 x 63100038

Were saved successfully road to file changes.

69 09:45:07.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

**. **. ***. 255.255.255.255 96.11.251.1 96.11.251.149 100

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.2.0 255.255.255.0 192.168.2.70 192.168.2.70 261

192.168.2.0 255.255.255.0 192.168.2.1 192.168.2.70 100

192.168.2.70 255.255.255.255 192.168.2.70 192.168.2.70 261

192.168.2.255 255.255.255.255 192.168.2.70 192.168.2.70 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 192.168.2.70 192.168.2.70 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 192.168.2.70 192.168.2.70 261

70 09:45:07.912 01/10/13 Sev = Info/6 CM / 0 x 63100036

The routing table has been updated for the virtual card

71 09:45:07.912 01/10/13 Sev = Info/4 CM/0x6310001A

A secure connection established

72 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B

Look at address added to 96.11.251.149. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.

73 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B

Look at address added to 192.168.2.70. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.

74 09:45:07.943 01/10/13 Sev = Info/5 CM / 0 x 63100001

Did not find the smart card to watch for removal

75 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014

Remove all keys

76 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010

Creates a new key structure

77 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F

Adding key with SPI = 0x1c4cafaa in the list of keys

78 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010

Creates a new key structure

79 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F

Adding key with SPI = 0xc5bfbe3e in the list of keys

80 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370002F

Assigned WILL interface private addr 192.168.2.70

81 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700037

Configure the public interface: 96.11.251.149. SG: **.**.***.***

82 09:45:07.943 10/01/13 Sev = Info/6 CM / 0 x 63100046

Define indicator tunnel set up in the registry to 1.

83 09:45:13.459 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

84 09:45:13.459 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205276

85 09:45:13.474 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

86 09:45:13.474 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

87 09:45:13.474 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205276, seq # expected is 107205276

88 09:45:15.959 01/10/13 Sev = Info/4 IPSEC / 0 x 63700019

Activate key dating SPI = 0x1c4cafaa key with SPI = 0xc5bfbe3e

89 09:46:00.947 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

90 09:46:00.947 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205277

91 09:46:01.529 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

92 09:46:01.529 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

93 09:46:01.529 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205277, seq # expected is 107205277

94 09:46:11.952 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

95 09:46:11.952 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205278

96 09:46:11.979 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

97 09:46:11.979 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

98 09:46:11.979 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205278, seq # expected is 107205278

---------------------------------------------------------------------------------------------------------------

Any help would be appreciated, thanks!

try to refuse the ACL (access-list AnyConnect_Client_Local_Print extended deny ip any one) at the end of the ACL.

Problems with Windows 7 Pro Remote Access

I'm on a Windows 7 Pro machine, but it is connected to a working network.

I'm trying to access Windows 7 Pro machine to my parents at home.

I went through These Instructions. We have created a password for one of the user accounts. I checked the name of the computer (there is no listed area). We confirmed that remote access has been enabled and allow remote access has been verified in the firewall settings.

However, when I start "Remote Desktop connection" on my computer and put their computer name in the box, I get a message that it cannot find the computer. Then, the message indicates that the computer cannot belong to "the network specified." But there is no specified network, and I see no where to do it.

In addition, it is possible that my work security settings prevent me from remote accessing another computer?

Last question: if I used the Fusion of the virtual machine on my Mac, with Windows 7, I can remote access to another computer?

Real technique. The problem boils down to the IP address. Your computer probably has an IP of 192.168.1.8 or something like that. But the router any fact domestic in the world. So when you want to connect to the remote computer, you must use the IP public face (which the internet service provider home assigns to your router/home, not that of your router assigns to your computer). But then, you're always short because now you have at home, but you have to tell the House what PC actually send this letter too. It's like an envelope with an address half. Port forwarding it tells the final step which PC should receive the message.

But yes I agree they could at least put a link or an explanation.

problem with users to access remote vpn site to site vpn network

I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?

execution of the configuration of my asa 5510 is

Result of the command: "show run"

: Saved
:
ASA Version 8.4(2)
!
hostname asa5510
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.178 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.10 255.255.255.0
!
interface Ethernet0/2
description Mreza za virtualne masine- mail server, wsus....
nameif DMZ
security-level 50
ip address 172.16.20.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name dri.local
object network VPN-POOL
subnet 192.168.50.0 255.255.255.0
description VPN Client pool
object network LAN-NETWORK
subnet 192.168.0.0 255.255.255.0
description LAN Network
object network NETWORK_OBJ_192.168.0.0_24
subnet 192.168.0.0 255.255.255.0
object network 192.168.0.10
host 192.168.0.10
object service ssl
service tcp destination eq 465
object service tls
service tcp destination eq 995
object network mail_server
host 172.16.20.201
object service StartTLS
service tcp destination eq 587
object service admin_port
service tcp destination eq 444
object service ODMR
service tcp destination eq 366
object service SSL-IMAP
service tcp destination eq 993
object network remote
host 172.16.20.200
object network test
host 192.168.0.22
object network mail
host 172.16.20.200
object network DMZ
host 172.16.20.200
object network Inside_DMZ
host 192.168.0.20
object service rdp
service tcp destination eq 3389
object network DRI_PS99
host 192.168.0.54
object service microsoft_dc
service tcp destination eq 445
object service https448
service tcp destination eq 448
object network mail_server_internal
host 172.16.20.201
object service Acronis_remote
service tcp destination eq 9876
object service Acronis_25001
service tcp destination eq 25001
object service HTTP3000
service tcp destination eq 3000
object network VPNPOOL
subnet 192.168.50.0 255.255.255.0
object-group network PAT-SOURCE-NETWORKS
description Source networks for PAT
network-object 192.168.0.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object admin_port
service-object object ssl
service-object object tls
service-object object https448
object-group service DM_INLINE_SERVICE_2
service-object object admin_port
service-object object https448
service-object object ssl
service-object object tls
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_3
service-object object admin_port
service-object object https448
service-object object ssl
service-object tcp destination eq smtp
service-object object tls
service-object object Acronis_remote
service-object tcp destination eq www
service-object object Acronis_25001
service-object object microsoft_dc
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object tcp
object-group service DM_INLINE_SERVICE_4
service-object object Acronis_25001
service-object object Acronis_remote
service-object object microsoft_dc
service-object tcp destination eq www
service-object tcp
service-object ip
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
access-list DMZ extended deny tcp any any eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
mtu management 1500
ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
!
object network mail_server
nat (DMZ,outside) static x.x.x.179
object network mail
nat (DMZ,outside) static x.x.x.180
access-group outside_access_in in interface outside
access-group DMZ in interface DMZ
route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record dripolisa
aaa-server DRI protocol ldap
aaa-server DRI (inside) host 192.168.0.20
ldap-base-dn DC=dri,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
virtual telnet 192.168.1.12
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 195.222.96.223
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.0.14-192.168.0.45 inside
!
dhcpd address 172.16.20.2-172.16.20.150 DMZ
dhcpd dns x.x.x.177 interface DMZ
dhcpd auto_config outside interface DMZ
dhcpd option 6 ip x.x.x.177 interface DMZ
dhcpd enable DMZ
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_x.x.x.223 internal
group-policy GroupPolicy_x.x.x.223 attributes
vpn-tunnel-protocol ikev1 ikev2
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 192.168.0.20 192.168.0.254
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-network-list value Split_Tunnel_List
default-domain value dri.local
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnadrese
authentication-server-group DRI
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group x.x.x.223 type ipsec-l2l
tunnel-group x.x.x.223 general-attributes
default-group-policy GroupPolicy_x.x.x.223
tunnel-group x.x.x.223 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect tftp
inspect ip-options
inspect netbios
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
: end

running config asa 5505

Result of the command: "show run"

: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password csq7sfr0bQJqMGET encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.5.0 PALATA
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.17 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.13.74.33 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp
service-object icmp echo
service-object icmp echo-reply
service-object tcp eq domain
service-object tcp eq ldap
service-object tcp eq smtp
object-group service DM_INLINE_SERVICE_2
service-object ip
service-object tcp eq domain
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
object-group service Sharepoint8080 tcp
port-object eq 8080
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
pager lines 24
logging enable
logging asdm informational
logging mail errors
logging from-address
logging recipient-address level debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 192.168.0.0 255.255.255.0
static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
http server enable
http 10.13.74.0 255.255.255.0 outside
http 192.168.0.0 255.255.255.0 inside
http 10.15.100.0 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
virtual telnet 192.168.0.53
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_2_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 10.15.100.15
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!

threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group 10.15.100.15 type ipsec-l2l
tunnel-group 10.15.100.15 ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
smtp-server 173.194.79.109
prompt hostname context
Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
: end

Thank you

Hello

I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel

EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"

So you don't really have any of those.

Please mark the question answers and/or assess response

Ask more if necessary

-Jouni

problem with host Governments 12 import location adobe

Hello
I have problems when I import my pictures from external het X drive. When he start the import of the image it is import
drive X. When it is finished and I expect for the location of the Organizer say are on the disc of Y. When I ask the Organizer to show the location in windows Explorer, it has the right of the road. Whenever I want to see a picture of the complaint of the Organizer regarding the location and want the image reconnet. But what I do more than 13000 image.
Or is it a failure of the installation. Right now I only did the albums so the system is only loaded with pictures.

I found the answer. I unplugged the drive there and the issue of the media. No problem. I plugged the drive there and the problem was there. Then I renamed my drive Y P and imprtet the media once again. Now, all the media remains on the x drive and the problem is solved.

Internal problems with ip addresses from remote desktop.

I have three servers that I can access via remote destop using public ip addresses, but I can't access it by using the server name or IP private via remote desktop. I can ping both the name and the ip address and nslookup resolves names correctly in the research front and rear. All firewall rules look OK. What can possibly be the problem?

Hi Ben,

Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums of Technet Remote Desktop Services.

Needing to make a larger banner and I have problems with Photoshop is very slow with the answer.

Windows 10
32 GB of RAM
1 TB SSD for essential motivation
System 64-bit
AMD Radeon HD 7800 series graphics processor
The banner, I'm getting is need to be 8ftx4ft. When I add more photos of her, the answer in Photoshop becomes slower I have most of the lap ram to Photoshop the project uses about 10 GB of ram! Performance its set to 80% of all the ideas on this acceleration or process to do? It's hard doing a project and answering super slow and not be able to do great thing.

I have not tried, but it can be useful a go.

1 open Task Manager)

(2) set the display to update slowly or paused

(3) find the process photoshop.exe (Photoshop must be open)

(4) make right click the process and set the priority of Normal to high or maybe even in real time

This should ask Photoshop receive more CPU time.

Problem of GPS location after updating to IOS 10

Anyone have problems with GPS location problem after update from IOS10?

I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway. Could not find 90% of time on my road. Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

I wonder if anyone has the same problem after the update.

Hello yinchiu85,

I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
Improve the accuracy of GPS

GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:
- Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
- Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.
If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.

If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

On privacy and location in iOS Services 8 and later versions
https://support.Apple.com/en-us/HT203033

X230T USB 3 port sleep problem with external Blu - Ray drive

Hi all

I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly. It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'. It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port. The drive is powered by an AC adapter and USB 3.0 cable included one.

I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows. Also enabled and disabled USB hub root energy saving. Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly. I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

I guess I'm out of luck at this point because I think I've tried all possible solutions?

Thank you.

Hi again,

I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

Best,

Adam

Problem with the Db link
Hi Experts,

I am facing a problem with Dblink

AMT OF remote Db
```
X1 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABC.DEF.COM)(PORT = XXXX)))
    (CONNECT_DATA = (SID = X1)))
```
Local Db AMT
```
 
X2 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = XYZ.DEF.COM)(PORT = YYYYY))
    )
    (CONNECT_DATA =
      (SID = ELF)
      (GLOBAL_NAME = ELF.world)
    )
  )
```
I am able to connect to X 1 with the id user USR & PWD password

However, when I create db link
```
 
create database link L1
connect to USR
identified by PWD
using 'X1'
```
It is created, however when I test, he says the invalid user id and password

Please let me know what I am doing wrong

Thanks in advance
Kind regards

Published by: 34MCA2K2 on July 11, 2012 08:37

Published by: 34MCA2K2 on July 11, 2012 09:18
Please refer to this http://lihaobin.com/?p=78

Maybe a problem with the case-sensitive password

Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

-By doing a reset network

-Do a reset total and restore my phone

-To restart my phone twice.

-Audit and third-party applications unnistalling

Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

Please fix bugs fast.

Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

Problem with GPS in very remote locations...

Similar Questions

Improve the accuracy of GPS

Maybe you are looking for