Satellite P500 - migrate from Win7 32 bit to Win7 64 bit?

Similar Questions

• Satellite P500 - periods of 'Busy' or 'not responding '.

  My Satellite P500 seems to have too many spells when a specific program appears as "Not responding", or where the cursor shows a form of "busy". This is particularly true for Internet Explorer.

  Others noticed this, is it just me? For no particular reason, I wonder if there are conflicts known between Win7 64 bit and Norton 360 or if ReadyBoost is really useful.

  Any comments?

  Thank you
  David

  Hello David

  In front of me, I have Satellite P500 preinstalled with Win7 64 bit (original Toshiba recovery image).

  I use just a few days, but I did notice a few strange problems. I do not use Norton and cannot confirm if there are a few conflicts but all things I installed work properly.

• No sound on my Satellite P500

  I have a portable Satellite P500 series - Windows Vista 32-bit - currently there is no audio data.
  A message "no audio output device is installed" appears when I hover over its icon in the toolbar.

  Can someone adcvise what driver should I install. ?

  Toshiba has produced two different models of P500 with PSPG8E and PSPGSE part number. On download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp choose your model and you will find the driver of his right.

  If you still need help to let me know that references your laptop and I'll find it for you.

• migration between the 32-bit versions and 64-bit Vista

  I would like to ask if it is possible to migrate from Vista 32 bit to 64 bit or later. If so, then how can we do that?

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  You will need to purchase a full version of Vista 64 bit disk/license (unless you have a retail license) and do a clean install.

  Read about the acquisition of media 64-bit if you have a license to retail at the link above.

  How to clean installation:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of Windows 7 64 bit on a Satellite P500

  I bought the above system in August last year with 32-bit Windows 7 installed. I understand that it is not possible to upgrade and to a complete new installation. Is it necessary to format the hard drive first? Have backed up all my data (there was not a lot), but wonder if there is something else I need to know before you continue. Any help would be much appreciated.

  Hello

  I m a bit confused because I have too many Satellite P500 and, as far as I know, this laptop model comes with 64-bit only.
  Can you please tell us what P500 you exactly (P500-xxx)?

  You are right; before installation Win7 HDD needs to be formatted. If you have installed the OS in the past, I guess you know how it works.
  Associated with Toshiba here are two things you should know before starting with the installation of Win7 64 bit:
  # Create recovery with the original Toshiba image DVDs. This disk, you can use if you want to have the factory settings once again.
  # Drivers, tools and utilities must be installed in the proper installation order. If you ned some hep with it let us know.

• Satellite P500 - Solution how to operate sound on XP 32-bit and 64-bit

  Hi all..
  Now, I write here how I did something that seems impossible...
  I mean sound running on a computer satellite phone / qosmio p500/505 300/500
  and other models with Conexant sound card high definition on x 32 / x 64 Windows XP sp2/sp3...
  I know that many of us have a problem to run any noise at all,
  the fundamental problem is that Windows XP doesn't have a built-in driver files
  are responsible for the recognition of the last sound based on the high-definition audio cards.
  Latest patch for kb888111 system published by Microsoft to address this issue was published in 2005
  and does not appear in the files that recognize the latest Conexant sound card.

  next problem is the correct driver. Toshiba has not released XP drivers for the card its Conexant
  for computer laptop qosmio / satellite 500 / 505, so you should find and use the drivers supplied by
  the manufacturers of other computer models. most of the pilots and the best have to download Lenovo and Dell.
  Personally I used to run the sound in my P500 drivers downloaded from the web site of Dell
  more important in the downloaded drivers, then to install is to edit. INF file that is located in the folder
  with the drivers. This file is a textfile and then edit it in Notepad.
  Edition. INF file is trolling in the path to the identification of our equipment.
  Hardware ID can be found for example in the Device Manager tab in the detroit, video controllers and games.
  for most new toshiba laptop hardware id is:

  %HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel, HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5069 & SUBSY S_1179FFD4

  but it can vary so please check it on your computer!

  Those who have managed to run the sound will certainly have to deal with another problem,
  After restarting the computer no sound and the computer loses the drivers and settings
  and next to the watch does not appear on the "speaker" icon. This problem is also resolved by me below.

  Now to work...
  I assume that you have already installed XP x 32 or x 64, but not yet executed a sound.
  to run the sound, install the chipset driver, then the kb888111 patch.
  If all goes well,
  the devices of the system device manager tab you should found 2 entries "Microsoft UAA Bus Driver for High Definition Audio".
  where are these 2 entries, click on each of them, right click and select "update driver".
  then you select "install from a list or specific location" and point to the location where you saved the
  files that you have downloaded from the link n ° 1
  Don't FORGET not to confuse it and do not try to update the x 32 system using file system designed for X 64 and vice versa
  When we updated the system should automatically detect the sound card in Device Manager should be of about
  5 points to mark yellow, four belong to Nvidia and one for the Conexant High Definition Audio HD audio.
  Now, install the driver from the Nvidia graphics card that contains the audio driver. After the restart of the installation
  After the computer restarts. Enter the Device Manager and it is more 5 yellow question mark points,
  is the only one this one belongs to map its Conexant, make right click on this one in yellow and
  Select 'update driver' and select 'install from a list or specific location ".
  and point to the location where you saved the files that you downloaded from the link n ° 2
  pointing hand and force the installation of driver. After installation, you enjoy the sounds.
  Don't FORGET not to confuse it and do not try to update the x 32 system using file system designed for X 64 and vice versa

  link n ° 2, includes the drivers that I have edited and I use myself
  in my Toshiba Satellite P500 - 1 CG. What are the drivers for XP x 32 and x 64 sp2/sp3

  link n ° 1 http://www.speedyshare.com/files/23583256/UAA_BUS_DRIVER_update.rar

  link n ° 2 http://www.speedyshare.com/files/23583437/xp_pebble_drivers_for_toshiba.rar

  Hey really interesting what s announcement, mate! :)

  Thanks for sharing this information with us. I think that it s very useful for other users they want to install Windows XP on their laptops.

• Satellite P500 - Touchpad functionality under Win7

  Took me to upgrade to Windows 7 RC, when I got my new laptop and I discovered that my side-scroller has stopped working.
  The touchpad itself works fine, but the side scrolling didn't and I can't find the device for the use of Device Manager, it lists just a PS/2 mouse, so I don't know what brand of touchpad that is or how to get the drivers for it.

  Thanks for the help!

  Hello Dabake

  You use not released operating system.
  Win7 is not officially on the market and didn t Toshiba Satellite P500 for start-up support.
  I mean that you can be happy that most of the functions works well and properly until Toshiba starts Win7 support. This feature is so important to you?

  Anyway, as Akuma wrote most of the drivers Vista works on Win7. Now, all you can do is install Vista touchpad driver designed for Satellite P300 and hope it works well.
  I recommend you to use Synaptics driver version 10.1.7.

• Migrating from 32-bit Windows XP 64 - bit Windows 7 - create Suite 6

  I am migrating from a computer with Windows XP 32-bit to Windows 7 64-bit. Install my existing Creative Suite 6 Design & Web Premium or I have to buy it again?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software.  This frees an activation if you have the option to install the software on another computer at any time.

  You can please consult the system requirements for CS6:-system requirements | Adobe Creative Suite 6

  I hope that answers your query!

• If moving from a 32-bit processor 64-bit, will I need new copies of Adobe software?  I'm currently under OS Win7.

  If moving from a 32-bit processor 64-bit, will I need new copies of Adobe software?  I'm currently under OS Win7.

  Newer versions of PS will install any version that your computer can handle, in most cases, it will charge the 32 and 64-bit versions. I think it started with the CS6, but maybe CS5. What version do you have?

• Migrate from 32-bit to 64-bit (oel4 to oel5)

  Hello
  
  We have applications (database) OEL 4, 7 SERVER has SERVER OEL5. Currently oel4.7 server is 32-bit, and we need to migrate to OEL5 64-bit server.
  Could someone please help us find the correct steps/docs for this type of migration.
  
  1 32-bit server
  Operating system-> OEL 4.7
  Version of database-> 11.2.0.3
  
  2 64 - bit server
  Operating system-> OEL 5
  Version of database-> 11.2.0.3
  
  Note:-we do not seek to upgrade the database. Just Let's break the DB to new 64-bit.
  
  Thanks in advance

  You will need to install the 64 bit 11.2.0.3 software on the new server (pay attention to the pre-reqs), then apply the patches of same to 11.2.0.3 that you applied on the old server, follow the procedure in the above link.

  Oracle Database (RDBMS) under Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]
  How to convert a database from 32 bit to 64-bit on Linux database? [341880.1 ID]

  HTH
  Srini

• Thunderbird. Migration from Windows Mail (Win7) and Firefox 35.0.1 is not compatible with ImportExportTools of Mozilla Support

  Try to migrate from Windows Mail, NOT Windows Live Mail in Windows 7 Home Premium.
  When I try and import the messages I get the message ' ImportExportTools is not compatible with FireFox 35.0.1.
  I'm following the instructions at https://support.mozilla.org/en-US/kb/switching-thunderbird.

  Y at - it a compatible version?

  Concerning

  Chris Parker

  You can download the extension using Firefox.
  But you will need to install it in Thunderbird.
  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Migration from 32-bit to 64-bit host host 32-bit clients

  OK, so this question was asked to me.   We received a new chassis for a blade/SAN solution for free.   The new chassis will be our recovery site and will support 64-bit of the blades (unlike our last production version).    We currently have 32-bit hosts in production with all the 32-bit guests and we intend to put 64-bit blades in the new chassis if we can migrate it 32-bit guests.   What I read 32-bit guests are supported on a 64-bit host but can migrate us host 32-bit to 64-bit host?

  It is still too early, so if it's coherent hike or you need any clarification please let me know.

  What I read 32-bit guests are supported on a 64-bit host but can migrate us host 32-bit to 64-bit host?

  Yes.  No problem.

• Update/Migration from 9i solaris (32-bit) at 4 knots RAC (10.2.0.4) Linux

  Source is on the single box with knot Conc Manager(Admin node) + DB under Solaris 8 (32 bit) and 1 App node(Forms/web) and version of the App is 11.5.10.2 and DB version is 9i (9.2.0.8).
  
  : Migration Plan target will be the 4 RAC on Linux 64-bit node and 1 Application under Linux 32-bit node.
  Target database is 10.2.0.4 and the version of the App 11.5.10.2
  
  
  
  My question is: is there another available method to migrate to Linux 32-bit solaris (64-bit).
  
  Using Note 9i process Import/Export for Oracle Applications Release 11i [ID 230627.1]
  
  Using the note above we can update/migration of 10.2.0.4?
  
  and for the application, I will use the migration to Linux version of Oracle Applications 11i [238276.1 ID]
  
  Please comment.
  
  Thank you
  Pavan

  So basicallly source steps and preparation of the source system so that the export must be made using metalink Note 230627.1

  Correct, if you're on 9iR2.

  and implementation of the target must be performed using 362203.1, if it is 10.2.0.4 is 1135973.1.

  Fix.

  Thank you
  Hussein

• Satellite P500 turns off most since re install Windows7

  Hi all

  Toshiba satellite laptop
  series: P
  Model: P500
  Model number: PSPGSE
  Operating system: Windows 7 Home Premium edition

  Following a final crash of the original hard disk, so I changed the drive and performed a complete re-installation of windows7 (an original touch and put my original).
  Subsequently I have re installed the driver via the toshiba site (most importantly, so no software supplied automatically with PC purchase), and that all are present according to device (of interrogation or other point of warning) Manager.
  More through the touslesdriver.com site, I added their scanning software small told the pilot to missing day or not (so basic but all seems normal...)

  Windows of decanting finished and I started to update the drivers, windows out never normally, menu, start, stop, closing the session and after that bogus on "stoppage of work" until the "Blue Shield (about 10 minutes later, a solution or the button works / stop)."
  Single point, drivers arrive to their windows or windows installation to restart, but the problem always comes back.

  Then in normal mode, no messages or any other information that makes me say that there is a problem, but when close windows here is barattes in a vacuum no solution other than the button walk / stop (I also tried ms config: stop all, same effect).

  Now in safe mode gives the change!

  Beginning and end of windows that is no problem!

  Still in safe mode, the device section driver, then display devices, 'plug and play' shocks only information is that an exclamation mark on 'Security processor loader driver' is not visible outside the safe mode.

  No possibility of anything and much too much different information on the net which could help me solve this exclamation point and certainly my problem?

  Hello

  I own P500 too, but I use it with the new HARD drive but with the original recovery image (Win7 64 bit) I've had with her. Why have problems such as you, when I can have perfectly installed OS. That do after the installation of recovery image's own upward and the optimization of the OS. I have delete all things I don't no need and turn off all unnecessary processes that can slow down my system.
  I m really wondering why you do the same and use OS without a few installation issues.

  In any case, after reading your ad I didn t understand what your problem is, but what I can say is follow:
  Satellite P500 is fully supported for Win7 so you do not have some third-party software of the part for the detection of drivers and similar useless diagnosis. All the necessary drivers, tools and utilities, you can find and download from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  On this virtual path, I can't tell what your problem and how to fix it. I know, it's that the whole available drivers on the Toshiba download page are tested and are part of the original image recovery.
  I think either you should reinstall the OS using original recovery image and remove all the stuff, you need or reinstall Win7 clean and begins to install the drivers, tols and utilities Toshiba download page only.

  Order of installation:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Value Added Package
  O2 card reader controller
  Audio driver
  Wireless LAN driver
  Synaptics Touch Pad Driver
  TOSHIBA HDD Protection
  Bluetooth Stack for Windows by Toshiba
  LAN driver
  Sleep USB TOSHIBA and service charges
  TOSHIBA face recognition
  TOSHIBA eco Utility
  TOSHIBA HDD/SSD Alert 3
  HDMI Control Manager
  ConfigFree
  TOSHIBA Assist
  TOSHIBA Web Camera Application

  Bye and good luck

• Satellite P500-12D - civilization 4 does not start

  Problem with Civilization IV patched in version 1.74

  Tried to run the game without a patch and it could load into a black screen and stop.

  Patched in version 1.74, he did the same thing but the message
  "Error loading shader libraries.

  Windows is up to date,
  Geforce drivers are up to date about those on the Toshiba site. I can't install

  the later versions available directly from NVIDIA, which is strange, as I am with a Geforce 230 M.

  SYSTEM INFORMATION: OS WIN7 64 bit

  Date 03/01/2010 01:14:58

  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video NVIDIA GeForce GT 230 M version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  May I ask if you have checked the system requirements for Civilization 4 first? Before you try to play a game, you should check the system requirments. Is the laptop fast enough and very important: the graphics card is compatible with this game?
  Check this box!

  If you meet the system requirements make sure that the latest Toshiba display driver is installed. Don t use the driver from nVidia directly, it doesn t have a protection against overheating.

  And you have installed the latest version of DirectX?