Windows 2008 Server NFS - permission denied when accessing the NFS data store

Similar Questions

• Multiple ESX servers to access the same data store

  We connect our ESX servers to an Equallogic SAN iSCSI using VMWare iSCSI card.   I have a data store that has ISO files to store.   So far, I can connect only this data to an ESX Server store on time.  I have to disconnect an and connect manually to the other.  We currently have a facility relatively bare bones (don't have vCenter again, grouping, etc.).

  Is there anyway to connect the same data store to multiple ESX servers?  I tried to adjust the volume of Equallogic SAN for read only (since I just need to read ISO files), but I can't connect to ESX servers when I do this.

  Remember that the volume is enabled for clustering.

  From v4.x Equallogic firmware, there is an option advanced on each volume.

  André

• VMware 5.5 Upgrade breaks access the VMFS data store (kind of)

  Now, before I get off, I will say that I am sure that the host I'm doing this on IS NOT on the HCL.

  (why I'm running old hardware?-c' is a community organization that I volunteer for which relies on hardware dontated)

  However, please read on.

  Updated an IBM x 3500 and a x 3650 (same generation - they are basically Tower and rack mount versions of the same kit) to esxi 5.1 to 5.5.

  (Exactly the same problem on both)

  Local storage - IBM Serveraid (aacraid)

  I was a bit confused as the controllers of disk and LUN show always also visible (just no VMFS didn't recognize any time how I rescan).

  (normally the LUNS do not appear due to a driver does not)

  I found that I was able to get future LUNS by practice

  'Add a storage '.

  "Disk/LUN.

  (30-60 seconds then shows the LUNS)

  

  It shows the drive bays, I click Next and select "mount disc and keep the signature '...

  

  The lun then comes fine and everything works.

  However rebooting it gets lost again and I have to repeat the process to get the VMFS volumes to come back.

  Possible entries for the vmkernel.log

  (2014 04-22 T 19: 56:42.265Z cpu2:33418) vmklnx_aacraid bunch of module: creation succeeded. ID = 0x410a640c1000

  (2014 04-22 T 19: 56:42.265Z cpu2:33418) < 6 > Adaptec aacraid driver 1.2.1.30300

  (2014 04-22 T 19: 56:42.265Z cpu2:33418) PCI: driver aacraid seeks devices

  (2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."

  (2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."

  (2014 04-22 T 19: 56:42.308Z cpu2:33418) IRQ: 540: 0x2b < aacraid > shareable, flags 0x10

  (2014 04-22 T 19: 56:42.308Z cpu2:33418) VMK_VECTOR: 218: Manager registered for 0xff2b, 0x10 shared interrupt flags

  (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: kernel 5.2 - 0 [17003] July 25, 2011

  (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: monitor 5.2 - 0 [17003]

  (2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: bios 5.2 - 0 [17003]

  aacraid0 < 6 >: serial

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) VMK_PCI: 395: 0000:03:00.0 device name: vmhba1

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) DMA: 612: DMA "vmhba1" engine, created using the Mapper "DMANull."

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T0:L0': seller: 'SERVERA' model: Rev "DIS1": "V1.0".

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

  0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T0:L0

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T1:L0': seller: 'SERVERA' model: Rev "SATA1": "V1.0".

  (2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T1:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.

  (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T1:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2014 04-22 T 19: 56:44.001Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

  0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

  (2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T1:L0

  (2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T0:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

  (2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.020Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T0:L0: not found

  (2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T1:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

  (2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T1:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.023Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T1:L0: not found

  (2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T2:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.

  (2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T2:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.027Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T2:L0: not found

  (2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T3:L0': seller: model "IBM-ESXS": "N VPBA300C3ETS11' Rev:"A496.

  (2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T3:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.032Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T3:L0: not found

  (2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T4:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

  (2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T4:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.039Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T4:L0: not found

  (2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T5:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

  (2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T5:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.047Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T5:L0: not found

  (2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T6:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.

  (2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T6:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.054Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T6:L0: not found

  (2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T7:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A3GA '.

  (2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T7:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.061Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T7:L0: not found

  (2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T0:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."

  (2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T0:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.845Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T0:L0

  (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T1:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."

  (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T1:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)

  (2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T1:L0

  (2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid device 0000:03:00.0

  (2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid 1 device

  (2014 04-22 T 19: 56:44.903Z cpu3:33418) ScsiNpiv: 1510: GetInfo for adapter vmhba1, [0x4108991c4400], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  (2014 04-22 T 19: 56:44.903Z cpu3:33418) Mod: 4780: aacraid initialization succeeded with module ID 4174.

  (2014 04-22 T 19: 56:44.903Z cpu3:33418) aacraid loaded successfully.

  (2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba32:C0:T0:L0 '.

  (2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba0:C0:T0:L0 '.

  (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T1:L0 '.

  (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T0:L0 '.

  (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T1:L0 '.

  (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T0:L0 '.

  (2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

  0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T0:L0 for the device "unregistered".

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiEvents: 501: events subsystem: device, created events!

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0

  0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.092Z cpu7:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T0:L0 unit could not detect. Failure of the error.

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T0:L0:1': not supported

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T0:L0" from plugin "NMP" of type 0

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

  0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T1:L0 for the device "unregistered".

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0

  0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.115Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T1:L0 of the unit could not detect. Failure of the error.

  (2014 04-22 T 19: 57:07.154Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T1:L0:1': not supported

  (2014 04-22 T 19: 57:07.154Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T1:L0" from plugin "NMP" of type 0

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T0:L0 for the device "unregistered".

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T0:L0

  0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0 x 79 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.166Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.166Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...

  (2014 04-22 T 19: 57:07.166Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 24 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.187Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.207Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe279 of the unit could not detect. Initiator error of storage.

  (2014 04-22 T 19: 57:07.217Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 25 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.253Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 26 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.289Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x27 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.317Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.317Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe279" from plugin "NMP" of type 13

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T1:L0 for the device "unregistered".

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T1:L0

  0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0x7b 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.328Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.328Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...

  (2014 04-22 T 19: 57:07.328Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 28 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.350Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.371Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe27b of the unit could not detect. Initiator error of storage.

  (2014 04-22 T 19: 57:07.381Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 29 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.417Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2a 0-dev 'naa.5005076c07bfe27b' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.453Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2b world 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.

  (2014 04-22 T 19: 57:07.479Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 04-22 T 19: 57:07.479Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe27b" from plugin "NMP" of type 13

  (2014 04-22 T 19: 57:07.501Z cpu2:33204) ScsiUid: 273: "vmhba0:C0:T0:L0" path does not support VPD device Id page.

  (2014 04-22 T 19: 57:07.510Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id

  (2014 04-22 T 19: 57:07.510Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba0:C0:T0:L0 for the device "unregistered".

  (2014 04-22 T 19: 57:07.511Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]

  (2014 04-22 T 19: 57:07.511Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!

  (2014 04-22 T 19: 57:07.520Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id

  (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba0:C0:T0:L0 unit could not detect. Way to not found error.

  (2014 04-22 T 19: 57:07.520Z cpu3:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba0:C0:T0:L0" from plugin "NMP" of type 5

  (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: detected SCSI revision number 6 on vmhba32

  (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change the revision number of the SCSI 6 to 2 on vmhba32

  (2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change removable media, bit of 'stop' on 'on' on vmhba32

  (2014 04-22 T 19: 57:13.043Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...

  (2014 04-22 T 19: 57:13.043Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd0 world 0-dev 'naa.5005076c07bfe279' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.

  (2014 04-22 T 19: 57:13.081Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...

  (2014 04-22 T 19: 57:13.081Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd1 world 0-dev 'naa.5005076c07bfe27b' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.

  (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T1:L0:1 detected device can be a snapshot:

  (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 16746273972281211240 >

  (2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 1308713170419776745 >

  (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T0:L0:1 detected device can be a snapshot:

  (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 15010766293529110797 >

  (2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 13427631733060988540 >

  (2014 04-22 T 19: 57:13.131Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba0:C0:T0:L0': unsupported

  (2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported

  (2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported

  (2014 04-22 T 19: 57:13.155Z cpu2:33204) SFS: 5092: pilot no. FS claimed "on the remote control": unsupported

  (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2059: device rescan time 101 msec (total number of 5 devices)

  (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2062: Filesystem probe time 70 msec (devices surveyed 5 on 5)

  (2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2064: refresh the open volume time 0 msec

  (2014 04-22 T 19: 57:14.826Z cpu3:32851) LVM: 13089: one or more LVM devices have been discovered.

  Commissioning services2014-04 - 22 T 19: 57:16.014Z cpu0:32895) Tcpip_Vmk: 123: nd6_rs_timer: no router on 'vmk0 '. Waive

  (2014 04-22 T 19: 57:16.531Z cpu1:33651) VisorFSRam: 634: vsantraces with (0,300,0,0,755)

  (2014 04-22 T 19: 57:16.531Z cpu1:33651) SFS: 6895: mounting fs visorfs (4108aa584010) with o 0,300,0,0,1,0755, vsantraces on 4108af971220 file descriptor

  Possible the syslog.log entries

  2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522a475e-80e96251-5f62-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log

  2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522 a 4783-5bbdaecf-9237-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log

  Someone at - it useful ideas?

  Thank you!

  Either you have to will the volumes - or clean all paths dead in your esx.conf

• Can I download windows 2008 server R2 64 bit Bill through the Internet.

  I bought the copy at retail of windows server 2008 R2 64-bit x. and I send out countries but Server 2008 Media Server is here in India. I want to install this product on this server what can I do. ? can I download the support from the operating system through the internet in its place. ?

  media is here and server in the other place and he wants intallation with in 2 days and I can send media can I download os across the net.

  Help me for this matter.

  No, you can't downloadit. You must purchase the appropriate version.

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Remote desktop disconnets after login Windows 2008 Server R2

  When I try to log on my windows 2008 server r2, it immediately disconnects with the following message remotely.

  Your Remote Session ended. The connection to the remote computer was lost due to network connectivity issues possible. Try to reconnect to the remote computer. If the problem persists, contact your network administrator. But the thing is I have other servers on the same network and I am able to connect remotely to them with all the problems. Please help me.

  FredAm

  Hello

  The question you posted would be better suited in thethe TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Mapping in NFS data store fails in PowerShell

  I'm trying to access a data store NFS on my server ESXi of Powershell. I am able to access the VMFS data stores, but not my NFS datastore. I use this command:

  new-psdrive-location (get-data store Backup) - name dsBackup - psprovider VimDatastore-root ' '

  When I type cd dsBackup: I get this error:

  Get-Location: no player named ' \Datastore\ [email protected] \Datastore-172.XXX.XXX.XXX:\VM\' was found for the specified provider. Online: 1 char: 3 + cd & lt; & lt; & lt; & lt; dsBackup: Set-Location: cannot find path ' dsBackup:------' because it does not exist. Line: 1 char: 3 + cd & lt; & lt; & lt; & lt; dsBackup:

  I use the same command when you access warehouses of VMFS data without problems. I am able to browse, read and write in the VI Client NFS data store.

  Everyone knows this behavior? Any help would be much appreciated.

  Just tried with an ESXi 3.5 build 130755 store data as well.

  Works well.

  Note that I used VITK 1.5 build 142961 for this last test.

  Have you tried with VITK 1.5?

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• Windows 2008 server v2

  Hi all

  Can you help me with this? a windows logon has been deployed on my windows 2008 Server v2. and when I tried to log on to the server as admin, I get a message 'security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator for assistance. Now, I can't log on to the server and everything I tried but to no avail. I can only log on locally as administrator on a client system if the virtual machine is stopped.

  Anyone can help the possible solution?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 2008 Server R2 Std - issue of Best Practice Analyzer

  Windows 2008 Server R2 Std - question BPA
  I built a new Windows 2008 R2 Standard Server and configured as a domain controller. When you run the BPA I get the following error, which I can not solve:

  Question:
  The default domain controllers policy is not in force on the OR OR = Domain Controllers, DC = WRIGHT.
  Impact:
  If the Group Policy settings that are defined in the default domain controllers policy are not applied to domain controllers, Active Directory operations may fail.
  Resolution:
  Link the default domain controllers policy to the ORGANIZATION OR unit = Domain Controllers, DC = WRIGHT

  The default domain controllers policy is linked to the domain controllers OU. I dun dcdiag and the only failure is NCSecDesc but I don't plan to add an RODC to the forest. When I run the resulting strategy game I can see domain controller policy has been applied.
  Is there something I can do to clear this error message?

  Hello Lynn Furlong,

  Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Your question deals with Windows 2008 Server R2, it would be better to post your question in the forums TechNet for ITPros.
  Click on the link here to transfer your question in the Forum Windows Server 2008 Group Policy. They will be better able to meet your group policy do not apply to domain controllers.

  Sincerely,

  Marilyn

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• Installation of vCenter Server on Windows 2008 Server R2

  Hi all

  I have the bits for vCenter 2.5 5 update and I try to install on a new Windows 2008 Server R2.  When I select the server option he returned that ports 80 and 443 are to use (which they are) and then advises to use the custom option.  I select custom and it indicates that the server cannot be installed and the client is available to install.  I'm missing something here, and vCenter Server will not install on R2?

  Any ideas?

  Thank you

  Anthony

  Hi Anthony,.

  vCenter 2.5 U5 cannot be installed on Windows 2008 Server R2.

  Please see page no. 15 of the http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

  Thank you.

  If you have found this unit or any other answer useful, please consider to allocate points for correct or helpful answers. *

• my software oracle 32 or 64-bit on Windows 2008 server (64-bit)

  I have a Windows 2008 Server(64-bit OS) in which oracle software are already installed (32-bit and 64-bit). But I do not know how to find the 32-bit oracle House and who is the oracle 64-bit home. I don't know when it was installed. I just want to know how could I check the address bit for oracle.
  
  Thanks in advance for the help.
  
  Kind regards
  Imran khan

  There are several ways (including those who work for only client installations) of MOS/metalink:

  How to check the size of Word (32 bit vs 64 bit) of the Oracle binary on systems MS Windows [465060.1 ID]

  Never tested, but this tool (filever.exe) should show the wordsize of an executable file or a dll:

  http://support.Microsoft.com/kb/913111

  Edited by: oradba the 23.11.2011 15:12

• How to create the listener in 11g RAC on windows 2008 server

  Dear all,
  
  I also worked on win 2003 and linux 4, 5. I installed oracle RAC on windows and linux.
  
  now, I have installed oracle on windows 2008 server.than RAC11gR1 installed oracle software. now, I want to create listener db_home i am facing problem.
  I m leaving db_home netca. After the insturction when I finished, start the process, but in the Middle shows the listener on node1 and node2 cannot be created.
  
  GUID me please how I willl be able to creat it.
  
  2nd fist how to create an instance of the DSO on RAC11gR1. is it need to install saparate House like 10g for it or I can create 11 g Software House.
  
  Thank you
  Shir khan

  http://www.Oracle.com/pls/db111/homepage?remark=Tahiti

• Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2

  I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role

  I managed to install Windows 2008 server but unable to t the wireless or ethernet to work.  I tried to use the driver 64 bit Windows 7 without success.

  I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2

  Thanks, in advance.

  Tour37

  Hi Paul,.

  Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.

  The driver works for Windows 2008 Server R2.  I just need to find the drivers for the wireless card.

  Best regards

  Round 37