Problem with Intel 4965AG wireless and logins to 5.21 on XP SP2

Hello

I updated the Intel Wireless 4965AG driver from 12.1.0.14 to new 12.4.0.21 (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70504), and I received the error "internal error 2753. iWrap.exe ". After that the ThinkVantage Access Connections did not find the wireless adapter, but the adapter works just fine under windows.

Access the version 5.21 of connections in Windows XP SP2. I have try the pilot to restore, but don't work too hard.

Please, I need help.

PS. I'm Brazilian and my English is bad.

Thank you

version of AC and OS added to the object.

Fixed a problem.

I installed the Protocol of Transport of WLAN and now everything works fine.

Thanks for help.

Tags: Lenovo Products

Similar Questions

  • problem with intel proset & atheros and M30X

    Hello

    I have problem with Intel PROSET. When I opened this program can't do anything just because my Wireless 2200 BG is not be listed in "network components. Moreover in Atheros I'm not able to do anything as well. It can suggest the problem with the driver, but I managed to connect to my friends wireless net. What can be wrong?

    I have my own installation of Win XP SP2 with all drivers and programs of Toshiba tools & utilities. (I had the same problem with recovery of victory)

    Thank you in advance for your help!
    Happy user of T M30X

    Hello

    I guess you have INTEL Wireless Card. After installation of SP2 to check if there is some conflicts in your device manager. You can update driver for the wireless card. It is always good. :)

    As BOB said go to https://eu.computers.toshiba-europe.com (then adapter & download of drivers and downloads).

    It is driver for your Intel (V. 8.0.12.9000W2BG) wireless card. Install it and check is there no conflicts in Device Manager.
    If this is not the case, turn your wireless card and FN + F8 to enable the wireless connection.

    If you re router wireless works correctly and if your WLAN has a name you see now. I know it's sometimes very complicated to establish the connection, but you must try all the options.

    Please let us know if you are creating your successful login.

  • A30 - problem with intel pro Wireless 2200bg - wireless always turn off

    Hello.

    I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
    I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

    Thanks for any information

    Hello

    Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
    If this isn't the case, then there is something wrong.
    Did also attach you the antenna cables to the Wifi card?
    You use the Windows XP client or customer of Intel for wifi?

    BR

    Tom

  • Problem with access to WV and HAVE

    So I see a few problems with the two Appstacks and writeable volumes in 2.5.0 which I think relate just a matter of what needs to be changed.

    • Writable volumes
      • I have 2 accounts for my account that I attributed an accessible volume writable on a specific system.  When I log in the system in question that subscribe to the Windows profile Service is unable to load.  If I am in the same system with my secondary account on the same system I have no problem.  If I kill the accessible volume writable in the Manager of that then I can login with my account first without problem.
      • I checked that I have no profile on the system, because it is a fresh charge and I use a local administrator account to join to the domain.
    • App stacks
      • If I attached a test battery to a provisioning system and try to install the software I could not create the directory "C:\Program Files (x 86) \Cryptophane" error 5: access is denied.  As soon as I cancel the commissioning Manager of installation of the software is complete without problem.

    The service account, I'm under Manager of appVolumes as the role of the admin

    If I connect to vcenter I can watch the virtual machine and see that the volumes are attached to the virtual machines in question.

    I tried several versions to see if there is something defined in Windows which is causing the problem.

    If a solution has been found.  It turns out a GPO has been the cause of the problem.  Once I added my test machines to an exclusion it resolved the problem.

    The policy in question contains the following settings that were the culprit

    Access to the removable storage / system

    • All removable storage Classes: deny all access-enabled
    • WPD Devices: Deny access read-enabled
    • WPD Devices: Deny access to write-enabled

    Is about to test an App stack, but this seems to be the culprit.

  • dv7t Quad Ed with Intel Centrino Wireless Card drops connection Internet with Netgear

    Hi all the world-help please!

    I received my dv7t Quad Ed with Intel Centrino wireless/Bluetooth card two Monday running on Windows 7 64.  I can't get my pc to maintain an internet connection more then a few minutes.  I'm solid on connecting wireless to the router (Netgear RangeMax Dual Band Wireless-N Gigabit Router WNDR3700) but I'm constantly getting "no internet access.

    I have updated the firmware of the router.  I made several updates of Windows.  Nothing has helped and then fifteen minutes.

    Thanks for any help you can give.

    Hello:

    Go to the Intel site and run their driver update utility and see if there is a newer driver for you to install.

    http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

    Once you do this, if an updated driver didn't help, or we were not available, click on your adapter wireless in Device Manager. Then click the Advanced tab.

    I enclose a general link to the Intel Advanced Settings menu and what they are doing...

    http://www.Intel.com/support/wireless/WLAN/sb/CS-025393.htm

    Make sure that the settings are default all except that I would like to change the following:

    Roaming aggressiveness... Lowest value.

    If this does not help, go to the configuration menu of your router and change the string being aired on channel 1 or 11 and see if that helps.

    Paul

  • Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

    Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

    That may be a problem with the DDE.

    Try to undo and redo Firefox as default browser.

    Make a different browser like IE browser by default and then let Firefox do it again.

    See:

  • Are there problems with Firefox 5.0 and 1Password 3.6.1?

    I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
    Are there problems with Firefox 5.0 and 1Password 3.6.1?

    They say you need 1Password 3.6.0 or later to work with Firefox 5.0

    http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

    http://help.agilebits.com/1Password3/firefox.html
    
  • Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    Kev2012 wrote:

    Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

    It would depend on what you're trying to link to?

    Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

  • Equium L10: Problem with the main battery and battery RTC

    Hello

    I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

    Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

    About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

    The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

    Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

    Concerning

    Brave0

    Hi Brave0,

    The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

    Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

    With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

    Kind regards

  • There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

    There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

    There are no withdrawal, must be replaced and released.

  • problem with the Finder - files and folders displaying incorrectly

    After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

    This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

    Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

    I decided to do a clean install of the operating system but nothing works.

    Is there some setting in Prefs I'm missing?

    Hi there highland99,

    Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

    Thank you for using communities of Apple Support.

  • I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

    I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

    Thank you

    Hi Bob,

    You can consult the following links of wire and check if it helps.

    Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

    With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

    Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Problem with Quicken 2012 House and the company after installation, runtime error

    I have a problem with my Quicken home and business 2012. I upgraded from 2009 to 2012 and was able to use the new version for about 1 hour, but he hung a little.  Now when I tent to access my Quicken program, I get a runtime error "program: C:\Program Files\Quicken\qw.exe ' abnormal program termination. Quicken is then stopped immediately.  I am currently running Windows XP service pack 3.  Any suggestions?

    Hi RENEE HETTERLY,.

    I suggest that you uninstall and reinstall Quicken program on the computer, check to see if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    If the previous step fails, then you will need to contact Quicken support for assistance.

    http://Quicken.Intuit.com/support/Windows.jsp

  • Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

    I recently tried to remove malware on my Vista based laptop Toshiba.


    I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

    I found that the best place to ask this type of question is here: -.

    http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

    There are some very good people out there who helped me (successfully) on 2 occasions.

    Good luck.

    I'll be interested to know how you go.

  • Problems with media player 11 and all other players, playing music is broken?

    Problems with media player 11 and all other players, playing music is broken?

    Hi all

    I have a big sound even and odd / problem reading music?

    My computer using windows media player 11 and classic media windows and others to play my music in the hard lists recorded by windows media player 11 copied from my CD.

    But here's the weird problem that only started to happen now, when I play music saved on any one of the players of the computer the sound breaks sometimes but not always?

    Even if I try tp use players like windows media player 11 to play recorded video clips sound breaks toward the top, but the video image only?

    I have a newly completed with windows xp home system and service pack 3, and all memory and material necessary for a pc game of level, a new graphics card was installed and by the way the problem of noise was there before this was done?

    I don't know what is the fault? And I don't know how to find out what the required audio driver are for his computer system I?

    I tried the right click on the audio device to see if the pilot could be updated in case that's all? All he asks is a cd or a floppy disk, but I thought you could ask to search for drivers online too?

    He even now breaks the game sounds too!

    Help, please

    If you access Windows Update (start - programs - Windows Update), you can
    see if there is a newer driver. The drivers are optional updates are not so made
    automatically.
     
    Download the driver for your audio hardware manufacturer (or motherboard if
    "It's built-in sound). They are often newer than Windows Update.
     
    This explains how to disable the improvements.
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it
     
     
     
    --
    ..
    --
    "zorkspacer" wrote in message news: 9bd0240a-60ba-4186-a47f-38d6b3f88ddb...
    > Problems with media player 11 and all other players, playing music is
    > broken?
    >
    > Hi all,
    >
    > I have a big sound even and odd / problem reading music?
    >
    > My computer using windows media player 11 and windows classic media and
    > others to play my music in the hard lists recorded by windows
    > media player 11 copied from my CD.
    >
    > But here's the weird problem that only started to happen now when I
    > play music saved on any one of the players of the computer sound
    > breaks sometimes but not always?
    >
    > Even if I try tp use players like the windows media player 11 to play
    > saved video clips, sound breaks toward the top, but the video image only?
    >
    > I have a newly finished system with windows xp and service pack 3 home, more
    > all the memory and the material necessary for a pc level game, new graphics
    > card has been installed, and by the way that the noise problem was there before
    > who did?
    >
    > I don't know what is the fault? And I don't know how to find out what the
    > driver needed sound are for his computer system I?
    >
    > I tried the right click on the audio device to see if the driver could be
    > update in the case where that's all? But everything he asks a cd or a floppy disk, but I
    > thought you might ask it to search for drivers online too?
    >
    > It even now breaks the game sounds too!
    >
    > Please help
    >
     
     

Maybe you are looking for