Problem with Kaspersky Setup XBox 360 than WMC Extender

Similar Questions

• Problems with WRT160N and Xbox 360 - please help

  Hello

  I recently bought a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes about 10 minutes to find a game then that in the Hall. I didn't put in the door or disconnected from my profile, there's just a lot of time. It says that my NAT type is open. I've isolated the problem is the router because if I plug in an ethernet cable from the 360 to the DSL modem I find games instantly. I examined the port forwarding and open ports on the 360 and specifically for modern warfare 2 and it was actually my NAT type go as strict, ironic. I have spent 5 hours trying to mess with this and can't seem to make it work right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.

  As your ISP is a provider DSL, most providers DSL has setup their modem in DHCP Mode, so your Modem acts like a router. So, right now, your Setup is NAT behind NAT. So if you try to open the Ports on your Linksys router it does not work as your Modem Hangs only ports.

  So the best way to work is to convert your Modem in Bridge Mode and it will solve all your problems.

• Xbox 360 Media Center extender 545 error code

  Hello everyone I thought I'd ask my question here as nowhere else.

  The problem is, my xbox 360 has benn works fine it's just the media library.
  Whenever I try to add as an Extender happens to the part where it sets up my xbox and it says error and it can not set up my computer. So far, I have tried the part where you remove certificates and restarted some Services, but none of them worked.
  Under Event Viewer, he said
  Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0022483530EF.

  
  

  Error: The system cannot find the specified file.

  If anyone can help me with this, it would be appreciated muchly, Spudals (Jake)

  PS. IM passing by a N1 Vision Wireless router, it worked before, so I don't think it's important.

  PPS. I tried on another laptop and it worked fine, this laptop also had windows 7.

  Hi Spudals,

  Welcome to the Microsoft answers site.

  I suggest that you allow the default Administrator and try to set up the media center extender, follow these steps:

  To activate the default Administrator account, follow these steps:

  1. Click Start and type CMD in the start search box

  2. right click on CMD in the list and click "Run as Administrator"

  3. type the following command: net user administrator / Active: Yes

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/67922948-62b9-4AC0-ba1f-12e9454d231b

  If the problem persists, you can try to create a new user account and the extension of configuration and check, if it works fine, then it could be a problem with the user profile, follow the steps in the link:

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  Check out the links below and try to set up the Xbox as of Media Center Extender.

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/articles/Extenders-Xbox-overview.aspx

  Set up a Windows Media Center Extender device: http://windows.microsoft.com/en-us/windows-vista/Set-up-a-Windows-Media-Center-Extender-device

  Connect your console to the Windows Media Center: http://support.xbox.com/support/en/us/nxe/xboxlive/troubleshooting/NetworkHelp_mcxpc.aspx

  Enjoy Windows Media Center on the Xbox 360 with your music, photos, Live Recorded TV and online media: http://www.xbox.com/en-US/pcsetup/MCEWindows7.htm

   

  Windows Media Center with Xbox 360 media sharing: http://support.xbox.com/support/en/us/nxe/GamesandMedia/SharingMedia/MediaCenter/ShareMediaFromMediaCenterPC.aspx

   

  Demo: setting up a console Xbox 360 as an Extender for Windows Media Center unit: http://windows.microsoft.com/en-US/windows-vista/Demo-Setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center

  Solve problems with a Windows Media Center Extender device: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

  You can also try to temporarily disable the security firewall and check.

  Also make sure that network discovery is turned on.

  Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings

  Make sure that network discovery is turned on.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I configure my Xbox 360 as an Extender?

  How can I configure my Xbox 360 as an Extender?

  If you have an Xbox 360 connected to a home network, you can use it as a Media Center Extender. It is an easy way to share your photos, music, videos and other media from your Windows 7 PC to your TV.

  1. turn on your computer and log on to Windows. Check that it is connected to your home network. (An easy way to do this is to open your web browser and navigate to a web page.)

  2. turn on your Xbox 360 and check that it is connected to your home network.

  3. on your computer, open Windows Media Center by clicking Start , allprograms, and then clicking Windows Media Center.

  4. on the Windows Media Center start screen, access tasks, click Add an Extenderand then follow the instructions.

  5. with the help of your controller Xbox 360 for go to My Xbox, and then select Windows Media Center.

  6 on your TV, follow the instructions on the screen to get a 8-digit Windows Media Center configuration key. Note this 8-digit setup key. It is the key that you will use for your Xbox 360 to your computer that has Windows Media Center of affiliation.

  You don't need to download any additional software because the Extender functionality is built into Windows Media Center.

  7. on your computer, on the screen to enter the "Setup" button in Media Center, enter the 8-digit setup key displayed by your Extender and then continue by following the instructions.

• Windows Media Center crashes when I try to put the Xbox 360 as an Extender

  Hello

  Currently, I am trying to set up my Xbox 360 as an Extender for Windows Media Center.  Everything goes well until I enter the 8-digit code.  I am able to enter the code and when I click on 'Next', it says that the program has stopped responding.  I tried both disable the firewall on my computer and clear the Cache on my Xbox 360 system.  You have any other suggestions as to what could cause this problem and how to fix it?  Thank you.

  Hi Josh

  You can get support for all things XBox on the following Microsoft Web sites.

  Xbox.com: Support Forums - Main Page
  http://forums.Xbox.com/

  Technical support of Microsoft Xbox | Help for Xbox 360, Xbox LIVE and Kinect:
  http://support.Xbox.com/en-us/pages/default.aspx

  Concerning

• I have a problem with my gamepad xbox workin with my WIndows XP Dell Laptop

  IM using a dell 430, I have a black xbox 360 controller, I have installed the software, when I connect to the laptop the popup of connections on my screen apears but no light up light... in my device manager, I see something that said microsoft controllers, but in the control panel nothing under controllers so I can't set it up and I don't think she even shows up... am I something wrong?

  Hello Lazram,

  Thank you for your message.  Configure you your controller after plugging in it?  Please see the steps below:

  Click 'Start' > click 'Control panel' > double click on "game controllers".
  Here, you should be able to configure your controller to your liking.

  Please let us know if it did or did not help to solve your problem.

  Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with Kaspersky Security System.

  I have Windows 7 countertop and use Kaspersky PURE 3.0 for the last 4 years.  Last week, it was corrupted.  I'm having a HUGE problem with society which, for some reason, do not want to give me a help to help solve my problem.  I uninstalled the program and tried to download the program from the Kaspersky website, this is the error message I have every hour (tried about 4 times!) - cannot install the application. Internal error 2771.  Password management feature.  I checked my computer for viruses with a Malware program and downloaded a temporary security system and the computer works fine.  I paid for this program to Kaspersky and it is not due to run out until December but I can't have someone to contact me?  Could someone please advise me and tell me what means this error message.  Thank you.

  Internal error 2771.

  Seems that this error is a typical for kaspersky

  http://bit.LY/1nQ1Wpy

  You can ask the help of http://forum.kaspersky.com/ and http://support.kaspersky.com/

• Im having problems with PC - my xbox connection

  Help me im get the sotware installer download of files and it says my xbox dosent have something but I'm totally confuesed my xbox is very well my PC is very good please help!

  Hello

  I suggest you for the link and check if that helps.

  Set up an Xbox 360 (or other device) like an Extender

  If the problem persists, please contact Xbox support for assistance on this issue.

  http://support.Xbox.com/en-us/contact-us

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  Please get back to us if you have questions about Windows. We will be happy to help you.

• Problems connecting a controller Xbox 360 to PC Vista

  I have problems with the connection and install it. I downloaded the program it appears on the help page, but my computer does not recognize the controller as being a game controller. Perhaps, I downloaded the drivers hurt or something. Please any help would be greatly appreciated.

  Hi guys here is the link for the driver for vista 32 bit http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=Gaming&type=Gaming&name=C8G-00004&os=WVista_32&lang=en it could be useful

• (I tunes has detected a problem with your Setup audio. audio video playback is not always possible.)

  Have already downloaded a new audio driver on the internet, its max. To install it but still no sound. always the same error message. Wran diagnosed and sought to sounds and Audio devices in Control Panel, all devices are listed as working properly. frustrated and need help.              Ideas, please, I could use some help. Thank you...

  Hello

  Are you facing this problem with ITunes?

  Try to set up the device in the default playback tab and check whether the problem is resolved.

  1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.
  2. click on the playback tab, click speakers and set its default value.

  Check whether the problem is resolved.

  Try to play music using Windows media player and check if it works.

  If you are facing this problem with ITunes, you may have to uninstall and reinstall the program ITunes that could help you to fix the program.

  If this does not work, I suggest you to contact Apple for assistance. Unfortunately, we can not help with third party software/hardware changes.

  http://www.Apple.com/support/

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I can not configure my xbox 360 as an Extender, nor can I play music it in WMP 12.

  I tried all the methods on the internet you can imagine, even those that I knew would never work, I tried anyway.

  Here are some of the things I've tried:

  • delete the DRM folder
  • disable the firewall on my computer and my router
  • restart all services related to windows media player, streaming, extenders, etc.
  • It removing the xbox 360 of streaming options and let them settle
  • Hook the two up to the router with an ethernet cable (I use my wireless PC)
  • I even tried to download zune to see if maybe this method would work in other

  It announced no results. I'm not a tech model, I was usually able to solve problems of this kind in the past. I went through the PC and the xbox and other parameters and identified which seems to be the issue. My PC sees the Xbox on network perfectly fine, even if sometimes he appears only in the option of "play to" in WMP. My Xbox, however, does not seem to recognize my PC on the network at all because I ran the PC connection on xbox test several times. This may seem like a firewall problem, but as I said earlier, I tried to disable both firewalls without result

  My setup is as follows: my PC is connected wireless (pretty sure this isn't a Word, but it just happened) to my router. My Xbox is connected to my router (ethernet) and my router is connected to a cable modem. My router is a Belkin N150, my computer is a Toshiba Satellite, I'm running Windows 7 Home Premium (100% up-to-date) and a white Xbox 360 (not sure what model it is, or if she same material).

  Please see what you can do with this problem, I tried to fix this for months, and I really wish I could listen to my music and videos on my xbox.

  Thanks in advance,
  James

  I'm so happy I finally thought to it. Just for someone else who has this problem can get it fixed, suggest a routers firmware update. I update my belkins firmware and my xbox my pc immediately. : D

• UPnP search fails when adding Xbox 360 Media Center Extender

  First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.

  My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.

  When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.

  The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538

  Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.

  That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated

  Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.

  That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?

  FIXED.

  Reinstalled NIC drivers.

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• Problem with FAX Setup dialog box

  When I start, a box dialog indicates that WIndows is trying to install a fax MACHINE and I have to go to the Manager end tasks now.  I don't want that, I didn't ask for it, I don't have the disc for it.  How can I get rid of him.  Microsoft doesn't make it easy to communicate with them.

  Hi Babs336,

  1. Did you the latest changes on the computer?
  2. Have you recently tried to install the Fax on the computer?
  3. When was the last time it was working fine?

  Method 1

  If you want to remove the computer's fax services, then try the steps mentioned.

  (a) click Startand then click run.

  (b) copy and paste or type the following command in the Open box, and then click OK:

  appwiz.cpl

  (c) it may take several seconds for your computer to compile a list of programs. The dialog box Add / Remove Programs opens.

  (d) click on Add/Remove Windows components on the left of the list of programs to start the Windows Components Wizard. This only lasts several seconds.

  (e) in the components list, clear the Fax Services check box, and then click Next. The installation program uninstalls the computer's fax services.

  How to enable and configure the fax service in Windows XP

  http://support.Microsoft.com/kb/306550

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Problems with basic setup and split tunneling VPN

  I created a SSL VPN in an ASA CISCO ASDM 6.6 8.6 running.
  IM able to connect to the VPN and reach all the devices with the LAN but I am not able to browse the web. When I activate the tunnel split Im able to browse the web, but then Im not able to reach any internal device.
  Here is part of the show's run:

  network of the RedInterna object
  150.211.101.0 subnet 255.255.255.0
  Description Red Interna
  network of the NETWORK_OBJ_10.4.1.0_28 object
  subnet 10.4.1.0 255.255.255.240
  inside_access_in list extended access permitted ip object RedInterna all
  Standard access list VPN_INTERNET allow 150.211.101.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  local pool VPN_POOL 10.4.1.1 - 10.4.1.14 255.255.255.240 IP mask
  failover
  secondary failover lan unit
  failover lan interface GigabitEthernet0 fail-1/2
  key changeover *.
  failover interface ip fail-1 10.3.1.21 255.255.255.252 watch 10.3.1.22
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 66114.bin
  enable ASDM history
  ARP timeout 14400
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.4.1.0_28 NETWORK_OBJ_10.4.1.0_28 non-proxy-arp-search to itinerary
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 187.217.68.145 1
  Route inside 10.0.0.0 255.0.0.0 10.1.1.78 1
  Route inside 150.211.0.0 255.255.0.0 10.1.1.78 1

  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.00495-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_VPN_ group strategy
  attributes of Group Policy GroupPolicy_VPN_
  WINS server no
  value of server DNS 8.8.8.8
  client ssl-VPN-tunnel-Protocol
  dominio.com.MX value by default-field
  type tunnel-group VPN_ remote access
  attributes global-tunnel-group VPN_
  address VPN_POOL pool
  Group Policy - by default-GroupPolicy_VPN_
  tunnel-group VPN_ webvpn-attributes
  enable VPN_ group-alias
  !

  I m don't know if Im missing a few small details or Setup. Any help will be much appreciated.
  Thank you!!!

  Hello

  When you use full VPN Tunnel (which is the default setting), you will have a number of things that you need to configure on the SAA.

  First, the ASA by default will not allow traffic to enter via an interface and then exit through the same interface. It is essentially, what happens when the customer VPN traffic comes to the ASA and then heads on the Internet.  In your case the traffic goes through the 'outside' and leaves via the 'outside' interface.

  You will need this command

  permit same-security-traffic intra-interface

  You can check if their licence at the moment with the command

  See the race same-security-traffic

  Second, VPN users will need to have the NAT configuration like all users LAN behind the ASA real. So you basically configure dynamic PAT for 'outside' to 'outside' traffic

  You can get there with the following configuration

  network of the VPN-PAT object

  subnet 10.4.1.0 255.255.255.240

  dynamic NAT interface (outdoors, outdoor)

  I suppose it should do for you to be able to connect to the Internet and the LAN when the VPN is active.

  Hope this helps

  Let me know how it goes.

  -Jouni