Problem with ListStyleButtonSet (I'm a noob)

Similar Questions

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.

• Many problems with my D530 SFF, freezing and black monitor (windows xp operating system)

  First off I want to start by saying that I am a complete noob when it comes to computer repair. But since it wouldn't kill me if I lost the files on my computer and I intend to get a laptop soon, I'm willing to tinker and try to solve the problem with my office on my own. First on my cpu fan had started to get progressively stronger over the years that my HDD approached capacity. And it seemed that the computer can get more hot than the optimal temperature. At the present time, I think the hard drive is completely filled and maybe ultimately causing my problems. Periodicly, I started getting messages that my virtual memory is too low and that the system could make more room. Now I clean a bit and delete files to make more room. A year and a half, this computer has not connected to the internet that last week I hung it and installed a bunch of updates automatically from windows (seemed to run more quiet and cooler). I also deleted bitdefender and malwarebytes and installed Avira. At the beginning everything worked well for a few days (some lag sometimes, but he had been trolling for a while) and that one day I left the system and did things around the House. When I came back my computer was powered down on its own. When I tried to restart led lights up and the fans and cpu but my monitor does not receive a signal. I turned the computer off checked cords, get rid of the dust in the case and that I tried to restart and got the same thing. After that, I pulled the ram and clean the slots and riser and the cd player and I tried to reboot after the installation. If I remember correctly this time the monitor received the signal, but the system froze on the start menu to hp. After that I stopped and restarted the monitor could not receive the signal. At this point, I decided to leave the 'thing' sit overnight and try again in the morning. I have two-way to ram and Board riser with those of d530 my father and got the same results. After about 6 hours or so I started the computer today and was able to start windows, but when I tried to access the control panel the system froze.  Initially, I thought that my graphics card was out, and I read somewhere else that others had similar problems when their processor is out, but the fact that windows started today left me speechless. It seems I can get liked long in the longer boot process I leave my office to sit down. What is an overheating problem?

  Hello:

  Your SFF model has two known issues. The CMT is not the power supply issue.

  1. the power supply explodes and smoke if left unplugged for a long period of time, so do not leave it unplugged. There are videos of this on the internet for your viewing pleasure (say).  I had 2 of them jumping on me. Scares the heck out of you!

  http://www.YouTube.com/watch?v=nHPf6jHdEFg

  More information.

  http://h30499.www3.HP.com/T5/business-PCs-Deskpro-Evo/HP-D530-SFF-power-supply-failure-information/TD-p/1040147

  2. the model is released at the time of counterfeiting capacitor.  The symptoms that you are desribing made the diagnosis of bad capacitors.

  Check the PC for capacitors sealed or curved around the processor and the motherboard in general.

  Here's a good article on who and what to look for. First browse the links on the left and on the right, there are pictures.

  http://badcaps.NET/pages.php?vid=2

  If you have bad capacitors, I would just scrap the PC. IMO not worth fixing - what with the bomb ticking power and everything.

  Get a dc7xxx used on eBay for less than $100.

  Paul

• Having several problems with programs

  I'm a noob to PC so I will probably need the step by step instructions.
  OK, problem 1.
  (1) in my Panel control to uninstall programs I uninstalled many programs, here's the question, icons, name, Publisher, version and installed on dates are there, note how I don't understand the size, Yes, size white on those.

  (2) OK, somehow and I mean, somehow, in my (c) thing I have a folder named "program files and, get this" Program Files (86), which im guessing means there 86 copies of itself or something, that would explain also how 70 GB is used up, even if I have virtually nothing large on my pc. " also, it won't let me remove it because I need of approval of administrator or systems, in addition, in the settings I gave myself all full power on my pc, literally, every box is checked in what I can do, and I still need approval.

  (3) insufficient memory is available to process this command, this only happens on 1 game, the game is very small size, I have a lot of storage space and all with the stacksize IRP does not, any number 1-12 or 90 000 works.

  (4) this text of bloody effin God will strengthen the will doesn't go far, I already deleted all cookies,

  (5) sometimes, just sometimes firefox not illuminate, no reason, so I install chrome, then she also do not turn, sometimes both do not illuminate, now both lights

  more info
  Windows 7 Edition home premium
  64 bit
  install memory (RAM) 4 GB (3,79 GB usable)
  more than 100 GB of memory left,

  Original title: get ready for some messed up problems.

  Hello

  I suggest you to read the following article.

  Take a look at this link here to explain the who of Programs (86):

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/programs-files-vs-program-files-x86/7d631676-e688-472a-a1bb-eefccfeca6d7?page=1&TM=1349285263858

  If you use a text improve Firefox see: How can I disable the affiliation platform 'Improve text' which is present on all my web surfing: http://support.mozilla.org/en-US/questions/887190

  Problem with the installer and uninstaller to consult the following link:

  The program to install and uninstall problem solving:

  http://support.Microsoft.com/mats/program_install_and_uninstall

• problems with partitions - help please. [Hp dv6 2135sl]

  Hi all! So, I'm first of all I apologize for my English Italian.
  I bought a laptop HP dv6 2135sl with Windows 7 and I have a problem with the partitions.

  The partitions are all primary and the order is the sequent:
  C (450 F)
  tool HP (99MB)
  recovery (16GB)
  Sistem (199 MB)

  I would decrease C up to 50 GB and create two other partitions: J (programs 150 GB) and K (250GB of data). Is this possible? I realized that I have to change one of the 4 partitions in scope. What is the best? (Partition Wizard report an error: "no free slots of MBR"). Can I still use PM or I need something else?

  PS: Cannot use Acronis (not supprt W7) and if it's possible I won't use Gparted because I'm a noob; )

  Thank you all!

  I found a solution:

  I used the tool of W7 to handle the drive. I have create a 270 GB partition (the maximum allowed this program), then the disk was converted from basic in dinamic one disk. I opened the Partition Wizard, I turned the disc in the base. As if by magic, I found recovery logical (previously primary). Now I am able to create the partition n!

• Upgrading to Windows 7 HP Pavilion dv6500 and have a problem with the resolution

  OK, here's my problem. I had Windows Vista, has been sick with it. I'm not used to ask someone if I can or can not install some software or OS, so I have two formatted partitions (recovery hp too) and installed windows 7 now, I discovered that he had a lot of problems with the drivers. I have successfully resolved all of them, even my hp legacy works and everything else, except the driver Nvidia. My screen resolution is 1024 x 768 and should be 1280 x 800. I tried all the drivers that are provided in the topic above here (dv6000 - dv9000 update for Win 7 or something like that) also downloaded and installed this driver "179.48_notebook_winvista_win7_32bit_beta", nothing helps worked on this problem for 2 days, am tired and ask for help I need resolution 1280 x 800 on my screen , and I now have 1024 x 768.
  Product: HP Pavilion dv6500
  s/n: CNF7310HBF

  p/n: GT391EA #ABB

  AMD Athlon X 2 and probably GeForce 7 GB video series...

  PS sory for my English.

  Dan or one of the others may be able to help if you post exactly what indicates the error.

  As you say you are not a noob so maybe you need to change something in the NVIDIA Control Panel. Maybe go to the advanced option when you're at NVIDIA.

  Personally when I clean installs I delete, and format the entire disk before installing W7. Doing it this way usually prevents this kind of error occurs. When you use the W7 install disk to format, it may not remove all of the old files registry Vista and can cause problems.

  If you start from scratch once again, this may solve your problem, but there is no guarantee.

  It took 4 tries on my HDX from Vista to W7 to do things.

  I just took a glance at my NVIDIA advanced and under Show options there is an option to "manage custom resolutions. Here I could input what I wanted. What's your has that?

• Edge E330 problems with OS 2

  Got a new E330 and I'm supposed to use Windows and linux for the University distribution, I tried installing fedora on my Thikpad 19. After having downloaded the .iso image file and install, everything has worked, except the wireless lan. I can't turn it on, and I can't find the drivers for a linux distribution.
  Well, after a few hours I just wanted to return to 8.1 windows and the boot manager didn't work. My friends helped me and after some google search we have disabled the UEFI and I could start W8. Knit the two, but the problem with the wifi is still there.

  PLS HELP

  (Preferably German)

  SOLUTION

  I found a Solution given by a guy in another community. Very well explained for all linux noobs.

  Link: http://ashhar24.wordpress.com/2012/06/15/setting-up-wireless-driver-fedora/

  (each WLAN adapter included)

• Problem with fluid form is not "fluid".

  I have problems to do a fluid form in Designer ES...

  Using Windows 7, Acrobat 9 Pro Extended and life cycle of Designer ES 8.2

  I'm a noobie to the use of life cycle of Designer ES and usually only use Acrobat Pro Extended to create PDF files in other formats.

  I am trying to help a group not-for-profit with a scholarship application form. They gave me a form that was created in Word. I converted it to a form of Acrobat in Acrobat 9 Pro Extended without problem (as I know in any case). However, the problem with the Acrobat form was the answer for the questions boxes would create a scroll bar when the answers are longer that the size of the box and the text beyond the viewable area is not displayed when you print. I read the other threads in this forum and looking for tutorials to make the fluid shape using the life cycle Designer ES by checking allow several lines, expand to fit under Y:/height and economy in a dynamic form of XML.  What makes the text box expand as needed, but the text and then overlay the text below in the form. I need the entire form to expand as needed based on the length of the answers to the questions. I know that others have had this problem, but I can't seem to implement correctly based on what I read when others have reported this problem. BTW - the form contains a header with the page number on the second page that should be repeated if the shape extends to three pages, etc. and a signature block which must remain at the bottom of the form when you are finished. I was not able to make the fluid form to test or work with these other potential issues.

  I am frustrated with this problem and would appreciate your help. I downloaded a copy of the form sanitized to see if someone can take a look and see what I'm doing wrong or missing.

  http://www.box.NET/shared/9a0bf9v8l8nn97slxchh

  Thanks a lot for your help.

  Eric

  Hi Eric,.

  Here's your form to you, I did a job on page 2 for you out of the box. https://acrobat.com/#d=0Dm * XIrtAFi4Y49nwWXBWQ.

  What I would say is that you have a bit of work to do. I changed the content on the Master Page (purple dashed area) area. This should be within the area of the page, giving you a margin. This is especially important when working with past presentations.

  You will need to place all the objects that are static within a positioned subform, then objects that grow in height within a Flowed subform. So also, the page must be set flowed.

  There are some forms here you should have a good overview:

  Explorer positioned and flowed subforms: http://assure.ly/eSGQMt.

  Extend page layouts objects flowed: http://assure.ly/e2jR0C.

  Making the dynamic fields: http://assure.ly/g80MVY.

  Create dynamic tables (has screenshots): http://assure.ly/gk8Q7a.

  Hope that helps,

  Niall

• swapImage problems with IE

  Hello

  I have a problem with the swapImage in my page. It works perfectly on Firefox but does not react (not even an error message) on IE.

  It's one of the pages:

  http://chat.Carleton.ca/~ryaniv/bookart.html

  If you open it in Firefox, you will see that when you hover over the information thumbnails appear below the image, but in IE the image appears (this is because I used a different method for images, I'm a noob and was learning as I went and just figured out swapImage late, huh).

  in any case

  The code is quite messy, but here is a part of it. I've highlighted the place where to get all the swaps. This is made with a DWT with one area editable I ID was later in the code like "Image2". As I said, it works in Firefox.

  function MM_goToURL() {//v3.0
  var i, args is MM_goToURL.arguments; document. MM_returnValue = false;
  for (i = 0; i <(args.length-1); I += 2) eval(args[i]+".location='"+args[i+1]+"'");
  }

  function MM_swapImgRestore() //v3.0 {}
  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;
  }

  function MM_findObj (n, d) {//v4.01
  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}
  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}
  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];
  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);
  If (! x & & d.getElementById) x = d.getElementById (n); Return x;
  }

  function MM_swapImage() {//v3.0
  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).
  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}
  }
  ->
  < /script >
  < / head >
  < body leftmargin = "0" topmargin = "0" marginWidth = "0" marginheight = "0" >
  <! - except for the Web Slice (tamplate general.psd) components - >
  < table width = "800" height = "601" border = "0" align = "left" cellpadding = "0" cellspacing = "0" id = "Table_01" >
  < b >
  "< td colspan ="13"> <!-InstanceBeginEditable name ="EditRegion10"--> < img src =" images/BookArtTitle_01.gif"alt =" "width ="800"height ="94"onClick ="MM_goToURL ('parent', 'index.html'); return document. MM_returnValue"> <!-InstanceEndEditable--> < table >
  < /tr >
  < b >
  < td colspan = "2" > <!-InstanceBeginEditable name = "EditRegion1"--> < img src = "images/tamplate - general_02.gif" width = "151" height = "46" alt = "" >
  < div id = "Divap2" >
  <! - except for the Web Slice (book art strip.psd) components - >
  < the table id = "Table_" width = "2440" height = "40" border = "0" cellpadding = "0" cellspacing = "0" >
  < b >
  < td > <! - except for the Web Slice (book art strip.psd) components - >
  < the table id = "Table_2" width = "2800" height = "40" border = "0" cellpadding = "0" cellspacing = "0" >
  < b >
  < td > < img src = "images/book-art - strip_01.gif" alt = "" width = "80" height = "40" onMouseOver = "MM_swapImage (" Image2 "," ' portfolio/Book Art Centre/info/1.gif',1); "MM_showHideLayers ('entry'", 'show') ' Mm_swapimgrestore; "MM_showHideLayers ('entry'", 'hide') "> < table >
  < td > < img src = "images/book-art - strip_02.gif" alt = "" width = "80" height = "40" onMouseOut = "MM_showHideLayers ('entrance2'", 'hide'); MM_swapImgRestore()"onMouseOver =" MM_showHideLayers ('entrance2' ", 'show');" MM_SwapImage ('Image2', ",' portfolio /Book Art Centre/info/2.gif',1)" > < table >.
  < td > < img src = "images/book-art - strip_03.gif" alt = "" width = "80" height = "40" onMouseOver = "MM_showHideLayers ('ap3dview5',", 'show'); "MM_SwapImage ('Image2',",' portfolio /Book Art Centre/info/3.gif',1) "onMouseOut =" MM_showHideLayers ('ap3dview5', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_04.gif" alt = "" width = "80" height = "40" onMouseOver = "MM_showHideLayers ('ap3dview4',", 'show'); "MM_SwapImage ('Image2',",' portfolio /Book Art Centre/info/4.gif',1) "onMouseOut =" MM_showHideLayers ('ap3dview4', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_05.gif" alt = "" width = "80" height = "40" onMouseOver = "MM_showHideLayers ('down,'", 'show'); "MM_SwapImage ('Image2',",' portfolio/Boo k Art Centre/info/5.gif',1) "onMouseOut =" MM_showHideLayers ('down,' ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_06.gif" alt = "" width = "120" height = "40" onMouseOver = "MM_showHideLayers ('Base1'", 'show'); "MM_SwapImage ('Image2',",' portfolio/Boo k Art Centre/info/6.gif',1) "onMouseOut ="MM_showHideLayers ('Base1 ',", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_07.gif" alt = "" width = "120" height = "40" onMouseOver = "MM_showHideLayers ('2'", 'show'); "MM_SwapImage ('Image2',",' portfolio/Boo k Art Centre/info/7.gif',1) "onMouseOut ="MM_showHideLayers ('2 ',", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_08.gif" alt = "" width = "120" height = "40" onMouseOver = "MM_showHideLayers ('forfait3',", 'show'); "MM_SwapImage ('Image2',",' portfolio/Boo k Art Centre/info/8.gif',1) "onMouseOut =" MM_showHideLayers ('forfait3', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_09.gif" alt = "" width = "120" height = "40" onMouseOver = "MM_showHideLayers ('planroof',", 'show'); "MM_SwapImage ('Image2',",' portfolio/Book Art Centre/info/9.gif',1) "onMouseOut =" MM_showHideLayers ('planroof', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_10.gif" alt = "" width = "80" height = "40" onMouseOver = "MM_showHideLayers ('facadenight',", 'show'); "MM_SwapImage ('Image2',",'portfol io/Book Art Centre/info/10.gif',1) "onMouseOut =" MM_showHideLayers ('facadenight', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_11.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers (" façade ",", 'show'); "MM_SwapImage ('Image2',",' portfolio/Bo ok Art Centre/info/11.gif',1) "onMouseOut =" MM_showHideLayers ('front', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_12.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('summersunstudy',", 'show'); "MM_SwapImage ('Image2',",'port folio/Book Art Centre/info/12.gif',1) "onMouseOut =" MM_showHideLayers ('summersunstudy', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_13.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('springsunstudy',", 'show'); "MM_SwapImage ('Image2',",'port folio/Book Art Centre/info/13.gif',1) "onMouseOut =" MM_showHideLayers ('springsunstudy', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_14.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers (" streetview "," 'show'); "MM_SwapImage (" Image2 "," ' o/Book Art Centre/info/14.gif',1 sensu) "onMouseOut =" MM_showHideLayers ('streetview' ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_15.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('back',", 'show'); "MM_SwapImage ('Image2',",' portfolio/Book Art Centre/info/15.gif',1) "onMouseOut =" MM_showHideLayers ('back', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_16.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('bookartdisplay',", 'show'); "MM_SwapImage ('Image2',",'port folio/Book Art Centre/info/16.gif',1) "onMouseOut =" MM_showHideLayers ('bookartdisplay', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_17.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers (" kristen "," 'show'); "MM_SwapImage (" Image2 "," ' portfolio/B ook Art Centre/info/17.gif',1) "onMouseOut =" MM_showHideLayers ('kristen' ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_18.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('displaymodel',", 'show'); "MM_SwapImage ('Image2',",' heart lio/Book Art Centre/info/18.gif',1) "onMouseOut =" MM_showHideLayers ('displaymodel', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_19.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers (" cabinets ",", 'show'); "MM_SwapImage ('Image2',",' portfolio/Book Art Centre/info/19.gif',1) "onMouseOut =" MM_showHideLayers ('cabinets', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_20.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('cutview',", 'show'); "MM_SwapImage ('Image2',",' portfolio/B ook Art Centre/info/20.gif',1) "onMouseOut =" MM_showHideLayers ('cutview', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_21.gif" alt = "" width = "140" height = "40" onMouseOver = "MM_showHideLayers ('diagnolback',", 'show'); "MM_SwapImage ('Image2',",'portfol io/Book Art Centre/info/21.gif',1) "onMouseOut =" MM_showHideLayers ('diagnolback', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_22.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('frontelevation',", 'show'); "MM_SwapImage ('Image2',",'port folio/Book Art Centre/info/22.gif',1) "onMouseOut =" MM_showHideLayers ('frontelevation', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_24.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('section1',", 'show'); "MM_SwapImage ('Image2',",' portfolio/Book Art Centre/info/23.gif',1) "onMouseOut =" MM_showHideLayers ('section1', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_23.gif" alt = "" width = "140" height = "40" onMouseOver = "MM_showHideLayers ('section 2',", 'show'); "MM_SwapImage ('Image2',",' portfolio/Book Art Centre/info/24.gif',1) "onMouseOut =" MM_showHideLayers ('section 2', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_25.gif" alt = "" width = "140" height = "40" onMouseOver = "MM_showHideLayers ('oldplan',", 'show'); "MM_SwapImage ('Image2',",' portfolio/B ook Art Centre/info/25.gif',1) "onMouseOut =" MM_showHideLayers ('oldplan', ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_26.gif" alt = "" width = "120" height = "40" onMouseOver = "MM_showHideLayers ('bookart'", 'show'); "MM_SwapImage ('Image2',",' portfolio/B ook Art Centre/info/26.gif',1) "onMouseOut =" MM_showHideLayers ('bookart' ", 'hide');" MM_swapImgRestore() "> < table >"
  < td > < img src = "images/book-art - strip_27.gif" alt = "" width = "100" height = "40" onMouseOver = "MM_showHideLayers ('bookartclose',", 'show'); "MM_SwapImage ('Image2',",' heart lio/Book Art Centre/info/27.gif',1) "onMouseOut =" MM_showHideLayers("bookartclose", ","hide");" MM_swapImgRestore() "> < table > "

  Soon, I hope you can help

  Rotem

  -using absolutely positioned elements (in addition to not be able to align the entire page to the Center or right)

  See link to Nancy.  And you can certainly line up any page you like same using absolute positioning.  Simply understand how positioning works.

  -not having a doctype (that means quirks mode and why is it bad)?

  Each browser has its own rules for rendering in quirks mode usually generating wildly different views cross-browser and compared to how you want it to look.  Quirks mode is how your pages are rendered when you do not have a doctype on the page.

  -do not use anchor tags (what are the anchor tags?)

  An anchor tag, it's what makes a hypertext link made a mistake to link, for example, go to foo.  The tag in red is an anchor tag.

  I am not really trained in html, but I would like to understand better.

  It is worth.  DW will be very frustrating if you don't.

  Okay so I replaced the Image2 (it was from the code DWT) and now it works, the problem is resolved.

  Do you have all related images or just this one?  You should do all.

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian