Problem with model tests

Similar Questions

• problem with loopback test base with NOR-6008

  I recently started to use DAQmx in c# .NET 4.0 with NOR-6008 USB DAQ. I tried a loopback test by connecting output to an analog input analog and tried readign the signal from the output to the entrance but did not send the signal (or maybe a problem with the code). The analog input readign reads a random value rather than the value entered by the user for the output. I connected ao0 and ai3 on data acquisition. Here's the code.

  private void button1_Click (object sender, EventArgs e)

  {

  Task analogOutTask = newTask();

  AOChannel myAOChannel = analogOutTask.AOChannels.CreateVoltageChannel ("Dev1/ao0", "myAOChannel", 0, 5, AOVoltageUnits.Volts);

  AnalogSingleChannelWriter writer = newAnalogSingleChannelWriter (analogOutTask.Stream);

  Double analogDataOut;

  analogDataOut = Convert.ToDouble (AnalogOut.Text);

  writer. WriteSingleSample (analogDataOut, true);

  }

  Private Sub button2_Click (ByVal sender As Object, EventArgs e)

  {

  Task analogInTask = newTask();

  AIChannel myAIChannel = analogInTask.AIChannels.CreateVoltageChannel ("Dev1/ai3", "myAIChannel", AITerminalConfiguration.Differential, 0, 5, AIVoltageUnits.Volts);

  AnalogSingleChannelReader reader = newAnalogSingleChannelReader (analogInTask.Stream);

  Double analogDataIn is reader. ReadSingleSample();

  AnalogIn.Text = analogDataIn.ToString ();

  }

  Hello

  I built an application using your code (with task.verify) and it works beautifully.

  Have you tried different channels of inputs/outputs?

  

  Curt

• 'Ink cartridge problem' with model C309g

  I inserted a new black ink to the my Photosmart C309g. I want to only use black instead of having to buy the colors as well. When I put in the dark, the screen comes up with 'ink cartridge problem", saying that the following cartridges (all color and black in the photo) are missing or damaged. Is any way to get the printer to work with the black only? I can't make it past the 'problem' screen and it will not bypass it with me I'm trying to print something in black and white.

  Thank you in advance for your help!

  @khuransh, you will need to replace the color cartridges until you are able to print again. The printer will not work without the color cartridges if you try to print in black. Color cartridges mixed with black to form a true black color. So when the colors are missing, the black will not work.

  @creditcard, the same applies, if the cartridge of yellow that came out, the black will not work because she needed some than yellow to form a black.

• Anyone having problems with sending test emails?

  During the last week, we seem to have issues when sending test emails... spins small hourglass and psins up to 5 minutes until the test is off... trying to figure out if this is a problem or something Eloqua...

  Hi Paul

  Our development team has been aware of this, and the gears are already in motion in order to continue the investigation and to solve them as soon as possible. Please log a case in the Support Portal, so you can be notified to the resolution.

  Kind regards

  Zainab

• Problem with Unit Test

  What I am doing wrong?

  I created a small example of how to test the functionality of substitution of variables within the unit test framework.

  Documentation: SQL Developer: unit tests

  create or replace procedure SimpleTestProcedure (param1 in varchar2) as

  Start

  null;

  end SimpleTestProcedure;

  /

  Test configuration with the following configuration:

  Input value: Test

  Process: Boolean function

  declare

  Param varchar2 (4 char);

  Start

  param: =: param1;

  If "{param1}"! = param then

  Returns false;

  end if;

  end;

  

  Is found in the following message is displayed after the test run:

  

  I use SQL Developer Version 4.0.3.16.

  Any help would be appreciated!

  Kind regards.
  

  Hi Flofe,

  It looks like the Boolean function as a validation of process takes no parameters that a function pl/sql 'generic' put... it's probably called "function" only because it returns a value, as does any function. But you can use substitutions of setting the parameters for the stored procedure that you are testing, which you are already doing.

  So, try to change your code to:

  declare

  Param varchar2 (8);

  Start

  param: = "{param1}";

  If "{param1}"! = param then

  Returns false;

  on the other

  Returns true;

  end if;

  end;

  And it should work for try you the little test...

  I hope this helps...

  Val

• Problem with the tests

  Hi, I bought a year subscription on my mac. Installed and everything is ok. but on my pc if I install the product, I get only trial version (with the mac off and connected)... I know it's up to 2 computers, but I only have 2. Thank you

  Hello

  Yes, you can use it on 2 computers.

  Do not forget that you are connected to correct address under which you purchased membership.

  You can refer it, please-

  Connect and disconnect activate Cloud Creative applications

  Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Applications creative Cloud back in test mode after an update until 2015 for CC

  See also-

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sandrine

• Problem with the Satellite A300D - 14 p

  Hi all!!

  I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

  Maybe that's the problem of processor, and I need to update drivers...! What do you think?

  I look at my CP CPU load is 100% the two core, when I play this game!

• Problems with HP laptop (model dv4-1225dx), turns off

  I have bolded the important bits.

  To be honest, I had problems with this computer since the beginning.  A lot of it, however, is due to a problem of overheating resulting from a wrong place fan and cons set to automatically install updates.

  But a cooling pad and a setting to choose what is installed more or less solved that.

  Now for the problem.  I installed Windows 7 a few months ago, and everything has been working fine since then.  Since yesterday, however, the computer shuts down after a few minutes of being on.  Now, the fan on this thing is very strong, even in low use (another drawback of this model, but is not the point) so I'm pretty sure that's not working.  But it does not seem likely that the computer could warm up enough to warrant a hard stop in a few minutes, it?

  I tried the Startup Repair but the computer is turned off before being able to complete it.  I'm still able to do if I start Windows normally, but once again only for a few minutes before it stops.

  So I have two questions:

  1. replacement of the fan of something I can do myself, or is it too integrated or complicated to manage?

  2. the random stop is really a matter of fan at all?

  On an unrelated note, Norton seems to have dug his own player to backup on my D drive, which means it cannot do a good backup.  How can I get rid of what I properly backup?

  Hello

  It may be a faulty hard drive. Try to run a test drive. here

  It can also be a fan problem. You can replace the fan yourself. Step by step here Guide

  With respect to the reverse, use the one that provide windows. Try this from microsoft. here

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Problem of matrix report with model RTF - text columns

  I have problem with matrix necessary report...

  I did it before using the pivot function in rtf export then the stylesheet xsl fo... model

  My problem here is in this case, the desired column (value - the center column) is the text column, and the pivot is based on the aggregate (sum or count) function that I don't want in my case.

  Attached my XML, and sample to in the excel sheet...

  and to understand the business, it's for quality module in EBS... The user can take 3 samples in the same sample for the same item, I want to show the name of tests alongside its results grouped by the number of the sample.

  any help would be much appreciated...

  This can be achieved through custom PivotTable.

  I created the RTF template for your condition.

  PFA (model and output)

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Problems of Hibernate with model Portege M750

  I have 2 Toshiba M750 models that have problems with hibernation. They have about 15 to 20 applications accessible. They put the device in hibernation, and it seems 4 of the 5 times that hibernation wakes up on his own. I don't know where to start check. Wake on lan. BIOS, they are issues where the Toshiba power save feature disappears from the taskbar.

  I've dealt with some Toshiba laptops not and never had a chance with the Hibernate. I wonder what I can do or check?

  Is there connected USB devices? Or a network cable?

  Maybe they are waking up the system.

  Check the BIOS and utilities Toshiba for these options.

• Problems with WebCam? YouCam allows to test your WebCam

  Software using YouCam to solve your Notesbook WebCam problems

  Problems with your computers webcam portable? You can use the YouCam software to solve problems with your webcam. It was really only a few questions, which can cause problems with webcam. Driver problems, bad video configuration and software issues. YouCam will be able to identify these two problems for you.

  Troubleshooting with YouCam

  
  First you want to make sure that all other applications are closed. Other applications can steal the priority of the YouCam software that could interrupt the troubleshooting. Then open the YouCam software. If there are problems with the WebCam, you will be alerted with an error message here.

   

  "Unable to connect to the video device" error:

  Hope this helps to solve many problems of webcam. Again, this is an informational message that should serve as a reference. If you have gone over these steps and are still problems please create a new thread and include your computer model, operating system, and any other information that would be helpful in resolving the issue.
  
  Thank you!
  Sean S

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot save model fuse to library cloud there was a problem with your account

  Cannot save model fuse at library of cloud, it is written: there was a problem with your account. Please log in online creative cloud to your account. So I did - login, what should I check? for is always written the same thing.

  I use Mac

  Povilas

  Hello!  Sincere apologies to this topic.  We had a few users report this error and have not been able to determine the exact cause.  However, most of the users were able to remedy by signing off accounts creative cloud, closing the CC desktop application and then restart and re-login.  Please let me know if it suits it for you!