Problems of Hibernate with model Portege M750

Similar Questions

• Problems of network with the Portege R500

  I reinstalled a R500 (actually downgraded from VB to XPP) and after loading all that I get a dynamic IP from the DHCP server and I can ping computers on the same local network... but I get no response when ping any device on WAN and, of course, I can't access the internet.

  Any ideas of what it is that the cause of the problem? I get an IP address on the wired NETWORK adapter and the wireless network adapter...

  Suggestions that is very appreciated...

  I'll try to update the BIOS (I've updated everything)

  Oh and Yes... I am a technician experienced in IT (15 + years of professional experience) ;)

  See you soon!

  EDIT / /.
  The update of the BIOS nothing... was already v1.60...

  Thanks for the clarification!
  Good bye

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Problems/Tablet Portege M750

  Recently got my new Portege M750 (12G - but I don't see it on any lists). In any case I'm a graphic designer so I tried to get the laptop to record the pressure so I could better pain by installing the drivers from wacom tablet PC from here: http://www.wacom.com/Tabletpc/driver.cfm

  They have installed fine but since the flexibility of the pen is much diminished. Clique is difficult to register and drag is buggy aswell. I tried to remove the drivers, but when I reboot it wants to just reinstall the wacom tablet driver again.

  Please this is getting frustrating, I remove the drivers from wacom (although it is located on the control panel), I tried to insert the restore disc to let him get the original drivers, but he found nothing.

  Anyone know how to reset the drivers to their original setting?

  Thanks in advance, any help is much appreciated.

  ~ It is a repost of the American forums, haven't gotten an anser yet. ~

  To be honest, I must say that I don't have much experience with the tablet PC computers. I have played several times with a single model of Portege, but I can't say I'm an expert for tablet PC.
  Until you wait the final answer, I just offer my personal opinion on all of this.

  As you know Toshiba delivered this portable tablet with own drivers, tools and utilities. It is designed for some tablet PC. All Toshiba stuff has been tested and it should work properly.

  In any case, go back to your question. How to restore drivers?
  Delivered restore disc is a picture of recovery facilities, and you can use it if you want to install OS and have again factory condition (clean OS preinstalled). So does not allow it for the installation of the single pilot.

  If you want to install specific drivers you can download from the Toshiba support page.
  To download the correct drivers, you know good for your laptop model number. You can find it on the sticker of Toshiba in the lower corner.

  Where you bought this laptop? What is the country of purchase?

• Problem in EBS with rtf in Word Model Builder model

  Hello
  
  I have a problem rtf with model made in generator model for the Word 11.1.1.5.0.
  Simultaneous requests end EBS with warring and a message in the log file:
  
  Failure of one or more shares of post-processing. For more details, see the OPP service log.
  
  When I download a template made manually, it works fine.
  
  My environment is:
  Windows 7
  Office 2010
  EBS 11.5.10
  5.6.3 XML editor
  
  Someone using generator model for the Word 11.1.1.5.0 for XMLP 5.6.3?
  What version of generator model for Word works for XMLP 5.6.3?
  
  Kind regards
  Marcin

  Please check the thread Re: error in CP and report completed with warning

• Big problems with my Portege 7140

  My computer (with X) crushed and windows does not start. Whenever he tries to go into windows (the blacscreen with white markers), it crashes just - I tried to fix the system with my XP disk but everytime I get a blue screen with an error message long claiming a missing partmgr.sys. I tried a boot disk, but the system will not read the boot or diagnostic CD (ISO) I do. I told the bios to boot the cd first. But every time I get an error "PXE - E61 Media Test Failure - check connection"

  As you can see everything I try defective - that means the error and how can I get around it? Advice for me would be very much appreciated.

  Hello!
  I had the same failure Message with my Portege 7010! My dealer told me that the motherboard IDE controller was vice.
  I think it would be best to contact your Toshiba Notebook dealer for control upward.

• Portege M750 - how to use Windows 7 gadgets with 3D sensor?

  Hi all:

  Portege M750 has several sensors on the inside (3D, accelerometer and GPS sensor). Enybody knows's Windows 7 gadgets based on these sensors, as a horizon of aircraft or other?

  Very interesting question.
  Have you also tried to ask this question on the forums of Win7?

• Portege M750 - replacing the CMOS (RTC) battery

  Hello world

  I have a Portege M750 model PPM75A-007010 and I need to change the CMOS (RTC) battery.

  If someone can share with me
  -where to find this battery
  -is normal around the battery and if you can tell me the number of battery?
  - or where I can buy this battery and price range?

  Thank you
  RC.

  Hello

  Normally, the RTC battery in these models are rechargeable.
  If not already done, please leave the unit on for the night (not disable, not extended, not sleep - but ON) and see if the problem is resolved.

  I think the accusation-description/also the RTC battery is mentioned in your user manual.

  Tom BR

• Portege M750 - 2nd HARD drive in the Bay select instead of optical drive carrier

  I just bought I used Portege M750 because my M700 was broken. Unfortunately, the berries to choose between the two models are not compatible. Although the availability of a 2nd drive hard trolley is mentioned in the user manual, I couldn't find the part of the disk for the M750 caddy. I tried a standard SATA-SATA HARD drive caddy, but I get a message "select Bay error" at the start, although the caddy runs under windows, as long as you do not hibernate.

  Does anyone know the part no of the real 2nd hard drive for Portege M750 caddy / M780? Or is there another 2nd carriage of hard drive that works with the M750 without restriction?

  Hello

  I guess that you will need a hard drive caddy part number: P000452980
  Then you could place this in the Toshiba Ultra Slim PA3408U-2CTE and PA3408U-1ETC HARD disk adapter

  But you can also contact the Toshiba ASP in your country to get a confirmation...

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• Portege M750 PPM75E Windows 8 drivers - SOLUTION

  Hello

  I just wanted to leave a message with the solutions that I found for different applications for Portege M750.
  These are the applications that I use the most,
  so if you need other drivers and applications just leave a reply and I'll try to find it.

  _Got work: _
  Pilot Bluetooth and 3G and GPS ([Toshiba Europe | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU])
  Keys, except the button Assist de Toshiba and presentation.
  Both opens it: [buttons | https://skydrive.live.com/?cid=0b5d644d977b4b3a&id=B5D644D977B4B3A%212226&sf f = 1].

  What I find more useful then the old functions.
  Installed value-added package, I think that from here: [go to the download section: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=M750-S7213&rpn=PPM75U&category=&selCategory=2756709&moi d = 2266999 & os = & ct = SB & selFamily = 1073768662]. The website of europe has failed.

  Utility of fingerprinting.
  Control Panel-> user accounts and the safety of the family-> user accounts and you have an option in the left side of the window for fingerprints. Install the drivers and programs, works like a charm. Or search on google for TrueSuite

  For the ctrl + al + arrow down to reverse the screen, I used iRotate (google it).

  Still no solution for the protection of HARD drive utility, again.

  Many drivers Win7 would work with system Win 8.
  But there are still some drivers and utilities which are not entirely compatible.
  I have a tip for you:
  As far I know the HDD protection as utility isn't a model of related software.
  You can try to install Win 8 HDD utility out to protect Z930 protection

  It would be really interesting to know if it works.

• Portege M750 - change from 32-bit to 64-bit

  I just bought a laptop Portege M750 which is preinstalled with Vista Business 32 bit and separate tablet XP on a recovery disk.

  I await with resinstall with 64-bit Vista business, then install the XP as part of a system to dual-boot to take full advantage of the 4 GB already installed in memory extension and more in the future.

  My question is this: Although the drivers Toshiba download page does not specifically list a Vista 64 bit OS, no matter who made a similar change of OS on a Portégé / or other laptop and had all incompatabilty with applications and 32-bit drivers? If so, what drivers/features have caused problems later.

  The "Toshiba" folder in the notebook computer C:\ directory contains all of the drivers and install files required or these all need to be downloaded from the Web site.

  Thank you

  Hello

  Usually, 32-bit divers are designed and created only for the 32 bit OS and usually they would not run on 64 bit OS. But who knows, maybe some unique drivers would be compatible with 64 bit but it is more than questionable.

  > Does the folder "Toshiba" in the directory C:\ for laptop computer contain all drivers and install files required or these all need to be downloaded from the Web site.
  Generally all Toshiba drivers can be downloaded from the page of European driver of Toshiba.
  Toshiba on C file can contain only the installed tools and software.

  See you soon

• Who are the real or compatible cards for the Portege M750-109?

  Hello

  Anyone know who is the number of the actual card for the Toshiba Portégé M750-109?

  I wonder if the PA3283U-1ACA iscompatible.
  (15V) voltage and amperage (5V) are the same, but what about the decision-making that plugs into the laptop?

  Can someone explain the significance of the various characters in the nummer adapter?
  For example, the difference between a (-1ACA) and a (-3ACA), a.s.o..

  For 200V cord, country differences are not a problem, I can get the power supply one another.

  But I need the adapter and its taken low voltage to be compatible with the M750-109.
  So, how do I identify what Toshiba cards are compatible?

  Thank you very much.

  Supports the adapter used for Portege M750 * 15 Volt ampere 5 *.
  You must use a power adapter that supports 15V too!
  This is very important!

  The value of intensity can be a little different but too low because in this case the laptop would not get enough power!

  > Voltage (15V) and amperage (5V) are the same, but what about the decision-making that plugs into the laptop?
  The 15V AC adapter should be the same

• Portege M750 and Win8.1 Pro - the tablet buttons do not work

  Hello

  I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

  In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

  I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

  > I don't know that I have installed all the drivers who wverything work with Windows 8

  Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

  As much as I know the Toshiba can't win on this Portege M750 8.1.
  This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

  You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

  So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

• Portege M750 and Win8 - metro and touchpad interface does not work

  For those of you who, like myself, tried to install windows 8 in a Toshiba Portege M750 and had problems in tablet in portrait mode I recommend the following driver, it works perfectly:

  http://CDN.Wacom.com/U/drivers/TabletPC/ISD_DualTouch_710-8.zip

  The problem that I had was that shot didn't work with the metro interface and touch works also and in portrait, strangely, when you touch the secren with different directions woul two arrows appear.

  This driver solved my problem.

  Hope this can help...

  Thanks for the info.