Photosmart B110a: Installer disappears for B110a

Similar Questions

• Cartridge for HP Photosmart B110a to the Brazil?

  Hello everyone, I have a HP Photosmart B110a, I bought in Germany, where I used to live. Now I am back in the Brazil and do not find the cartridge HP 364. Y at - it an equivalent cartridge that I could use with this printer and sold in my country? Thank you for the attention.

  Hello

  Compatible cartridge for the Brazil's HP 564. Given that you have moved to a different printer area will not accept the new cartridge immediately, please contact HP to get a regionalization reset after which the printer accepts the new cartridges.

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• Photosmart B110A: Photosmart B110A - missing HP Support Assistant.msi

  Hello

  I use Windows 10 and I just installed the latest

  version of the software for Photosmart B110A

  from scratch.

  The software always tells me that it is missing

  the file Assistant.msi of taking in charge of HP.

  It says Error 1706, and something about a bad resource.

  I don't know where to find the file or how to

  solve the problem.

  Kind regards
  Martin

  Hi @mploug,

  Welcome to the HP Forums!

  I understand that you are missing the file HP Support Assistant.msi for your HP Photosmart B110A, on the operating system Windows 10. I'm happy to help you!

  Please, try the following steps:

  1. Close the window to locate the file with the message "Error 1706", if you don't have already done.

• How can I disable wireless on Photosmart B110a?

  I had a lot of intermittent problems with the Wi - Fi on my Photosmart B110a, but the USB connection is perfectly OK. I had a few printintouts on my printer from a neiighbour, those unwanted. Please tell us how to completely disable my wireless connection. Thank you, Bill.

  Windows7 64bitAcer ' aspir ' 5732Z

  There is an option to disable the card wireless in the printer.

  * Press the key for the Setup Menu on the front panel of the printer

  * Select the submenu wireless

  * Under this menu is an option to turn on/off wireless.

  I hope this helps.

• Two HP Photosmart B110A printers but just a watch onscreen HP Solutions

  I have two printers Photosmart B110A in different places. Does not show that I just installed on the screen on my laptop (Windows 7) HP solutions Center.  All I can see is the former.  Any ideas? The printer is connected to the network and installed on the laptop.  I have NOT reinstalled the software (i.e., I did insert the CD supplied with the newest printer) fear that it overwrites the original and I lose the connection with the first.

  Any ideas? The screen of the HP Solution Center can handle two identical printers?

  Thanks ciccarelli - all sorted now.  A little research showed me that the screen of HP solutions will indeed two or more printers that appear as tabs on the left.  I loaded the CD that came with the new printer and my fears of crushing the first were unfounded.  I now have a tab for each printer on the screen of HP solutions.  Well done HP and thank you once again, ciccarelli.

• Photosmart B110a yellow ink went Brown (HP364 cartridge)

  On December 24, 2013, I replaced all three colors HP364 ink cartridges in my Photosmart B110a as they were exhausted. (The black cartridge didn't need of replacement). Today (21 January 2014) I noticed that the colors were bad printing; a race of 'print quality' showed that the reason was that the yellow cartridge, while always 75-80% full, was in fact the Golden impression. The withdrawal of the yellow cartridge, I noticed that the stamp was no longer a yellow/orange color, but was in fact a darker tan/brown color. A 364 yellow replacement cartridge and a clean print head have solved the problem, but I would like to know four things:

  1. Is this a common problem? The guy where I bought the replacement cartridge said he had heard of that happens (specifically with yellow HP cartridges and specifically 'Brown printing') front.
  2. Is he likely to damage my printer permanently? Is the oxidation or whatever it is the yellow ink that is likely to cause damage to the print head itself?
  3. If it still happens once can I claim for a warranty replacement cartridge (and if it does not damage the printer at all times can I claim repair/replacement of the printer under warranty although the printer itself, which works perfectly, is no longer under warranty?)
  4. The printer is slightly used. I can avoid this by making a color print (of anything, even a page "print quality") at regular intervals? If so, what type of interval? And if that's the case could it be documented somewhere?

  It is a 'real' HP 364 cartridge (supplied by Argos to the United Kingdom, manufactured in Czech Republic and with a warranty date in 2015), not OEM, not recycled, either said in passing.

  Hello tonyinselby,

  Welcome to the HP Forums!

  I am pleased to learn that you have been able to get the problem solved.

  1. it is very difficult to say whether this is a 'common' problem with the yellow HP364 cartridge. Without the complete troubleshooting with the cartridge, I can't tell what the more precisely caused the problem. Sometimes Yes, like all other products, some have flaws.

  2. no is not likely to cause damage to the print head, you are able to use the yellow replacement cartridge.

  3. According to the guarantee of the cartridge, and the printer warranty. It is possible to have the cartridge, printer or replaced. To do this well you will have to contact HP Support at the time of the question, because I can't guarantee what options are available to you.

  4. with printing in color at certain intervals, this can help with the print quality, as the ink is not just sitting there. Keep in mind also that your printer does its own maintenance as long as it stays on. You can also run a cleaning print head to properly maintain the printer.

  I hope that this answers your questions .

  Thank you.

• HP Photosmart B110a - poor print quality

  Hello

  I have a HP Photosmart B110a CN245B and I use Mac OS X Lion version 10.7.2.

  I bought this HP Photosmart camera in the month of August, I changed the black cartridge once and it worked well. But now, replacing the black cartridge for the second time, I had a few problems. Printing is faded, I can barely read what is written on the page, even if I chose 'Grayscale - black print cartridge only' and 'Best quality'... the print quality is very bad. What can I do?

  Thank you very much!

  I think that the printhead has failed.  It should be under warranty.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• Photosmart B110a does not print another property

  I replaced the cartridges of color with authentic products on my Photosmart B110a.  Until then it worked perfectly.  Now it prints shocking images of color in pastels.  Does not print black which is 3/4 full.  I use a Mac.  I powered by printing, computer, uninstalled and reinstalled and still no luck.

  Test pages print works and the colors appear.  I cleaned the print heads.  I have re-aligned heads too.  Help, please!

  Hi Deelesley, don't know what fixed it but glad to hear it of good feeling back for you.

  FYI, if you have problems again the link below has a lot of support documents & troubleshooting for PS b110a

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&CC=IE&DLC=en&LC=en&product=4022343&tmp_track_link=ot_search

  Ciara

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• HP PhotoSmart b110a stops at halfway printing

  When printing from Windows 7 for HP Photosmart b110a cable, the printer starts normally but pauzes at halfway. Nothing happens for minutes, and then he throws the paper and gets a new. Then again, but stops at halfway. Same thing.

  When printing wireless smartphone Android or Ipad I have no problem at all, so the problem is not in the printer I think.
  I already reinstalled complete driver. And the critical update installed on HP site...
  Please help, thx for the Netherlands,
  Steven

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - Photosmart Wireless e-All-in-One Printer B110a - Software & Driver Downloads
  <- set="" to="" your="" vesion="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart Wireless e-All-in-One Printer B110a - Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably still the drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• Photosmart B110A: Ink cartridges Setup

  Hello world!

  I have reset my Photosmart B110A (by entering the hidden menu) but now when you want to install it and set it up, the process stops because I did not SETUP ink cartridges, but others. How can I fix that?

  Hi @Daniela3,

  I came across this post which, if you want to try it at your own discretion to see if it helps. I'll send you a PM. In the forum next to your handle name, simply click on the envelope to see.

  Thank you!