Connection problem with 10.11.3 on MacBook Pro

Similar Questions

• Problems with the transfer software for MacBook Pro, MacBook Air

  The store transferred applications and content of a machine for new applications of the NEB and most works OK. However, the Adobe Creative Suite 4 Design Standard CS 4 for Mac (purchased in October 2009) is unusable. I need two packages in particular: In Design (this is the version 6.06 and continues crashing, which gives a 0x0008014B error code) while Photoshop said some components are missing and must be reinstalled. How? Adobe says these versions are incompatible with the MacBook Air and that they can offer no support. I'm not technically proficient and feel totally perplexed. Any suggestions?

  Jokila

  I do not know. I don't own a MacBook Air.

  You can download the demo version of the software through the page linked below and then use your current serial number of disks to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• connection problem with screen

  I bought a compaq presario cq61-421sa about 18 months ago, so it is now out of warranty, and I have a connection problem with my screen. the entire right is taken up by different colored about vertical lines 1 pixel everywhere and therefore can not see half the screen.

  any idea how much it would cost to get HP support to do a repair on it? as I don't have the confidence to do it myself

  Hello

  Thre are 2 things that are likely

  the video card

  (b) the screen itself

  To check this, simply connect the laptop to an external monitor (from a friend, parent,...) If nothing wrong with the external monitor, which means that the screen of the laptop is faulty, if the video card is faulty. I don't know the cost but I charge $640 plus a party; Sometiomes my recommendation is to buy a new machine.

  Kind regards.

• My BT Broadband connects to all other devices except my MacBook Pro, help?

  My BT Broadband connects to all other devices except my MacBook Pro, help?

  You use a wired connection to the router or WIFI?

  If the latter can you see other networks on your computer, and you can see your own network?

• Question AHCI with Bootcamp Windows 7 on Macbook Pro (please help!)

  Hello, I've been running into issues with my Early 2011 15 "Macbook Pro since I used Bootcamp to install Windows 7 64 bit Home Premium on my new Samsung 840 Evo SSD, I installed in it." What I read, it meets the criteria to run AHCI, but for some reason, I can do activate or install the Intel series 6 Chipset AHCI drivers.

  I was thrown around the web with people saying: they got their SSD to work on the Windows partition, but I can't understand what I'm doing wrong.

  Here is the link that I got more at Apple, which has all of the other information that you might be looking. If this isn't the case, please post and I will reply as soon as possible.

  https://discussions.Apple.com/message/26326822?ac_cid=op123456#26326822

  Help, please! It drives me crazy, and I really need this working classes begin about a month.

  Thank you in advance for your time and effort.

  Hello

  Thanks for the reply.

  As directed by the error that you have given, I suggest you follow the steps below to install the drive in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  Let us know the status of the issue.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• iPhone/iPad connectivity problem with of 5508 WLC

  Hello

  We are implementing a new Cisco 5508 WLC and C3602I LWAP corporate wireless network. Us are not running no matter what RADIUS or EAP for now and start with WPA2 / AES with a pre-shared to start flying.

  The question that we are conducting is based iOS devices (iPhone/iPad) don't seem to want to connect. We just get one couldn't enter wireless messages. We had success with several portable Windows-based, my MacBook connects, as well as several different Android devices.

  Looking at the logs on the WLC I see those entries that correspond to the MAC address of my iPhone.

  * apfMsConnTask_6: 17:25:20.620 Jul 17: % CSA-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:376 could not check support rate. Lack of support rate. Length: 0 mobile MAC: 24:ab:81:92:4 d: 97.

  Does anyone has any ideas or have encountered this problem before?

  Any help would be greatly appreciated.

  Thank you!

  Andrew

  What is happening with several iDevices?  Can you try to restart one of these iDevices, because there seems to be a problem with the unit and not the wireless.

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• Connection problems with M6 1205-dx

  I recently bought a 1205dx M6 model and am enjoy, but I'm having a problem with connectivity to the internet.

  Sometimes, the wifi adapter will totally fall signal. My laptop is about 5 feet from the router so it isn't falling because of a problem of distance it disconnects sometimes just the router for no reason. I can't click on network settings and reconnect quickly without problem, but if I'm in the middle of a Skype call or an online game it disconnects me and is aggrivating.

  The card built into the system is an AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter and I have everything from the BIOS updated for specific drivers for the card itself, and she continues to perform. Does anyone else know this or have a fix for this, I'd be more than happy to give it a try. Thank you!

  EDIT: I also tried the fix listed on the sticky at the top of the page, but it did not help.

  You are the very welcome.

  If all goes well, it will go around.