Problem with my simple on/off button music

Similar Questions

• Problem with a simple integral

  Hi all

  I have 2 problems with a simple integral, and I do not understand how the first HP solves.

  My first problem is that if I add a constant before my variable, the answer becomes really weird.

  My second problem is that if I just change one letter (q becomes Q), the answer changes completely.

  I am attaching a picture of the calculations so that you can understand my problem.

  Thank you very much for your help

  Kind regards

  Xavier

  When you type wx you now have a variable named "wx" - not w * x which is what I suspect you intend. You must manually add a multiplication between them.

  When you use the Q, you are actually using the predefined global real variable that is most likely the value 0. If you've stored 2 in Q, I suspect that you'll get a different result. Remember that all variables in capital letters from A to Z and THETA and already defined as real numbers. VARS-> HOME-> REAL-press and you will see them.

• Problem with the Apple start and stop music

  s everyone having problems with Apple music constantly stop and start today?  It is on my PC and iPhone.

  What is your internet connection?

  Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

  See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

  https://www.Apple.com/support/SystemStatus/

• Problem with m230: not enough space for music DB. Please free 8 MB.

  OK, so. Hi, I'm new in this forum.

  Then.  I wanted to listen to music. SanDisk initialize arrived, then the 512 MB Sansa m230 and then the error:

  Not enough space for music DB. Please free 8 MB.

  And then you can see: no files 0/0. And the battery is fully charged. I thought that the...

  So I decided to connect m230 to my computer. First initialization, then the error came, had to wait a bit and then... the Sansa screen shows:

  USB connected MTP (and this popped into my computer: http://i30.tinypic.com/2i9jo82.png)

  Then. I open Sansa m230 in my computer and the folder that I saw was: RECORDING

  Well... I'm sure many of you could suggest me to format or reset. But... There is a problem:

  Where is the format button? (http://i31.tinypic.com/dvoky9.png)

  Then. I tried to format it in computer management. Device Manager > portable devices >
  Sansa m230. But... where is the format? (http://i31.tinypic.com/10x7q06.png)

  I went through a few topics, and someone suggested to format under removable storage, but there is no m230.

  Then I thought that I try the FirmWare update. But... the error popped up:

  The following error occurred: your device is in MTP mode. It can only be updated in MSC mode. Please disconnect your device and switch to MSC mode if you want to check the updates.

  But good... How can I change the mode MSC, coz... If I press the menu button on my m230, always pops up an error:

  Not enough space for music DB. Please free 8 MB. I can't do nothing in the menus. Aaand by the way, I have this player mp3 more than a year, so there is no guarantee or something for me I guess.

  Then. is there a way to do the hard reset or something? Is there a way to fix my m230? Feel free to ask me questions. I would be very happy if you answer.

  Aaand... Sorry for my English. I'm not from English speaking countries

  All the best,

  MagicIsland

  Hello MagicIsland, you may need to format your device, but it will delete everything on your player to try to see if you can always save the files when you connect your device by following these steps.

  http://KB.SanDisk.com/app/answers/detail/A_ID/1/kW/not%20enough%20space%20For%20Music%20dB%20error%20For%20m200/r_id/101834

  hope this work

• Problem with the Code/Design view buttons

  (My bad... maybe a clearer title will help you...)

  OK, I work with DW CS4 v.10.0 Build 4117 on a platform of Win XP Pro SP3.

  When you work with files from my site, they open in Code view.  The Split and design buttons are grayed out.  When I click the page layout button, the check mark is sometimes next to the option Code, but sometimes next to Design (even if the page is clearly displayed only in Code view!).

  To view the file in Design view or split view, click the page setup button, click on the Code, click on the button layout again, click Design or split view and then it will display the page in this way file.

  It's SO frustrating!  Is this a bug in CS4?  (I scanned through the other topics and can't seem to find anything about it.)  I don't remember having this problem with CS3 and have spoken with other DW CS3 users who also say that they have never had this happen.

  What can I do?

  Thanks in advance for any help you can provide.

  Susan

  Hi Susan,.

  I might have a solution for this one. I had the same problem. It would be 'reliable' whenever I would create a new PHP file.

  "File" > "New" > "PHP" > Layout 'None' > 'Create' - no buttons 'Split' or 'Design' (grey)

  In 'preferences' under 'File Types/errors', there is a section "open in code view".

  I removed the. The extension PHP from here, tried again and it worked!

  Maybe it will work for you.

  Good luck

  Tony

• Problem with the simple query.

  Hi all

  I am facing problem with the query below

  Select A.COL1, A.COL2

  B.COL1, B.COL2

  FROM TABLE1 A

  TABLE 1 B

  WHERE A.header = '123'

  AND B.header = '123'

  AND nvl (A.COL6, 'ABC') = 'ABC '.

  AND NVL (B.COL6, 'DEF') = 'DEF '.

  Basically, my requiremenyt is: I have only one table, TABLE1 here, which has a line two lines (for the same header) as "ABC" and another is "DEF". Table 1 has two columns (col1, col2) that should be displayed for both lines.

  When the header has two records in table1 top query works. and but if I do not have a record for any header example there are a record for "abc" in col6 only. so my query above does not work because there is no record for 'DEF' in col6. But I want to again request to fecth the output (for b.col1 and b.col2 should have null values)

  could you pls suggest me how to get the 4 columns.

  Thanks in advance

  Kind regards

  UVA.

  Try to place the status of outer join on column: analytical_criterion_code as

  and nvl (AUDIT.analytical_criterion_code, 'AUDIT2') = 'verification2. '

  .

  .

  and nvl (TRANS.analytical_criterion_code, 'TRANS2') = 'TRANS2.

  In the sub query based on the opinions that you have given in post # 1, although there is no value "DEF * ' for col6 due to the condition of outer join on b.col6 (+) line is extracted with b.col [1,2,3] as NULL values. Try to remove the (+) sign b.col6 and test.

  with t as)

  Select 111 col1, col2 'aaa', 'ABC' col6 123 header of all the double union

  Select 222 'bbb', 'DEF' col6, 123 double header

  )

  q as (select 123 double header)

  Select A.COL1, A.COL2, A.COL6

  B.COL1, B.COL2, b.COL6

  q.header

  T a

  t b

  q

  where a.col6 (+) = 'ABC '.

  and b.col6 (+) = "DEF."

  and q.header = a.header (+)

  and q.header = b.header (+)

• Problem with "PCI Simple Communications controller" driver in inspiron n5010

  Hello

  As a first step to apologize for my bad English

  After installing Win7 Ultimate 32 bit on my inspiron n5010 I installed all the drivers and components are working properly, but one of the devices have problem because I can not find the drivers for it. This device is "PCI Simple Communications controller" and he scored in the device with the yellow symbol Manager and button update driver in Device Manager does not work for this.

  How to find the driver for this part of my laptop?

  Thank you

  Hello

  You can also download it from dell.

  N5010--> chipset--> Inter Management Engine Interface Driver

  If you see the version of the file. you will see that it supports windows 7 32-bit ultimate too.

• Problem with users simple Javascript running in an Active Directory environment

  I support the local government environment.
  After the latest updates for firefox 25.0.1 and Java 7 update 45 we are facing a lot of difficulties to access the sites provided by the central Government.
  In some cases, the problems are solved by re - install java or that allow plugins to run.
  In a particular case, we can access all the features (same photos and links to java scripts) to a site by using an administrator account, but cannot use a simple user. Activation of java deployment toolkit and Java (TM) platform plugins for the site did not work.
  Computers face the problem to run Windows XP Pro + SP3.

  The same issue does not appear when you run google chrome...

  Hello ageorgopoulos,

  Please contact the Mozilla Support. This seems to be a difficult issue and I hope that we can help you.

  • Did you try a hard refresh of the page with Ctrl + F5?
  • Also have you tried to see if there are errors listed in the Web console Tools > developers Web > Web Console?

  See you soon,.
  Patrick

• Problems with the simple serial communication.

  I followed a tutorial online to start learning basic communication series. The involved tutorial shorting pins 1 and 3 on port 1 Comm and write a simple program (attached). I've edited it a bit, the program to see varied results I get when trying to write and read a simple sentence via a serial port.

  Could someone explain what causes the kind of result shown in "Serial Comm example.png"? I think it has to do with timing. Why would be transmitted only the parts of the sentence?

  Thank you

  Sarah

  sarahzig wrote:

  The involved tutorial shorting pins 1 and 3 on the Comm 1 port

  What should be pins 2 and 3?  On a standard serial port DB-9, pin 2 is the receive and pin 3 is the transmission.

  Now for your code...

  1. move the Serial Port to be before the loop to set it up.  Simply configure the port once.

  2. close the port after the loop.

  3. managing your error after closing.

  4 stop your loop on an error or the stop button has been pressed.  You will need a RC in there.

  5. no need to Flush Buffer function.  Remove it.

  6. using the bytes to the Port is a dangerous thing.  It introduced all kinds of race conditions that are interesting.  Instead, say VISA reading to read the number of bytes that you expect to read.

  6a. Moreover, don't forget to send a character to end of line at the end of your data and all the number of bytes to read something a lot more than you ever expect read.  The VISA read will stop reading when he a) sees the number of bytes, it was said to read, b) sees the stop character (currently enabled and set to a line break, which is part of the end of line), or c) the time-out occurs.  Whichever comes first.

  7. with 6, the wait is no longer necessary.

• Several problems with a simple replacement of the subset of table

  I'm new to LabVIEW and I try to teach me how to use it.  As you can imagine, I'm running into a few barriers.  The code that I'm including embodies many of my problems.  If someone can explain to me how to improve this code, I would be grateful.

  Copy the following code is a simplified version of a more complex code, that I'm writing.  In the simplified code, I have a control ('VALUE') that I would like to register at different locations in my table of 5 x 3.  To do this, I tried to make a 5 x 3 constant I could replace it with the value of the control.  The code does not work as expected and this is my specific problems:

  1. I can't initialize the array constant (the one I intend to crush).  I can only initialize the first row.  Based on the help files, I thought I should be able to initialize it by clicking on the boxes in the chart on the block diagram and entering values.  But it doesn't seem to let me do this.  Don't know if there is a special way to open when more than 1 dimension is involved?

  2. my slider controls are intended to establish where in the table to place the element.  But is not no longer works.

  3. I can't understand how properly to a code which has a while loop integrated in a while loop.  Someone recommended using a structure of the event, but as a beginner, I will have trouble to know how I would enact who.  I tried to play with the settings of locking/switching the button stop, but that did not work, either. The problem seems to be that, if I am inside the while loop, the program does not see my stop command.  Is there a way to connect as the stop button works, regardless if I'm inside the another while loop?  If not, is there a way to accomplish what I want in the smallest loop without using a while loop?  If I used a structure of the event, how would I created an 'event' to tell the program to store a new data point in the array?

  Thank you.

  Jessica

  Jessica,

  Also note that in LabVIEW array indices are zero-based.  If the values of the row index can be 0, 1, or 2.  If you want your users to see 1, 2, and 3, then put a function decrement between the terminals of the cursor and the function replace table subset.

  Lynn

• I have a problem with the security being off center.

  Hello world. I'm trying to solve the problems on a laptop of series of 15NB57 Phillips, under Vista Home Premium, 32-bit + SP2.

  1 "the Security Center is disabled. After clicking the box "Turn on Now", the error message reads:-"the Security Center

  cannot be started ".

  After visiting the Microsoft Forum, in which relates to this specific issue, after you follow the instructions for 'Services', navigated to the folder 'Security Centre', as shown, & there is NO!

  "Security Center" can be installed on the computer 'Services', without that there is a backup drive, or a system image

  to fall back on, because the computer is old for a few years now, but still in good working condition? And, IF it can be done, how?

  Two software I have for protection that are on the computer are:-Microsoft Essentials, & Spybot S & D. I'd really like to

  you want to be able to put a real anti-virus/anti-spy on software.

  2. in the section 'Firewall' of the program, a command prompt says "Windows Firewall is not using the recommended

  To protect your computer, the settings ".  Along the coast, which is one is an another prompt 'Parameters of update now'.  After clicking

  "Update settings now", the error message reads:-"Windows Firewall was impossible to make the requested updates.

  And finally, always in the firewall section, the two features on the left hand...

  ... "Turn Windows Firewall On or Off" & "Allow A program Through Windows Firewall" on the TWO actions, the error message reads:-"due to a problem not identified, Windows cannot display Windows Firewall settings.

  I think the problems are especially linked, & these are produce because the "Security Center" in the section of the program Services does not exist. It could a virus of one form or another has deleted it.

  I am familiar with computers to a certain extent, but not when it comes to dive deeply into the program. With 'step by step' instructions when it comes to bios & register (I was at a time when looking for something that I had to look for), should be no problem.

  Any help, advice or assistance that can be offered, would be welcome, and appreciated.

  Thank you, in advance for your help.

  Yours Sincerely

  cw63

  p.s. isn't the computer, I'm trying to sort my own. I have an Asus nice execution 8.1 Win

  Colin,

  Thank you for keeping us posted.

  I wish that refer you to the first article, but also the response of the second -

  http://support.Microsoft.com/kb/2519899/en-us#top

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Vista-Home-Premium-Security-Center-service-is/b04734b6-Deab-44D7-aa2c-0d73149daf21

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  We know if that helps you.

• Positioning of the problems with State multi (9 Captivate) buttons

  Hey all,.

  I just tried to use a button with an additional State (the text will turn green when chapter is complete). When I change the position of the button it will jump around everytime I go on it with the mouse cursor. The problem is that I can't change the position of other States of the button, but it is clearly recorded independently. Looks like a bug to me.

  So I actually can not press at all more.

  Update:

  1. This only happens in a responsive project
  2. This problem affects each smartshape transformed into a button, not just those with an additional State.

  Post edited by: Nicolas Reibnitz

  Just to finish this place for now:

  The issue seems to be the project file. Why this has happened, I can't say.

  Sonia has discovered and wrote in an e-mail we can resize the button jumping a little. Then the position is again in phase. After that even the new buttons show no more jumping behavior. Maybe it helps someone who has the same problem at one point.

  If someone finds out how this corruption of the project may occur, I would like to know about it.

  Thank you all!

• Problems with a simple site, had fixed the issues but now its happening again, shifting of pages

  Hello

  
  

  I'm building one pretty simple compared to my other site and have never had this problem before that's why I'm really confused.

  Two of my pages keep transfer of a couple of cm to the right, and others remain the same.

  I'm gone in the FAQ forum and found that someone else had the same problem so added

  HTML {}

    overflow-y: scroll;
  }

  Who stopped to question, until I rebooted the computer today, and the issue is back. I use DW8.

  
  

  This is the CSS for the site

  * {

  padding: 0px;

  }

  
  

  
  

  {#wrapper}

  width: 890px;

  margin-right: auto;

  left margin: auto;

  }

  #wrapper #header {}

  height: 77px;

  width: 890px;

  margin-right: auto;

  left margin: auto;

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 70px;

  color: #000000;

  }

  {#wrapper #div2}

  height: 9px;

  }

  #wrapper #header #leftheader {}

  float: left;

  width: 740px;

  height: 77px;

  }

  #wrapper #header #rightheader {}

  float: left;

  width: 150px;

  height: 77px;

  }

  page of #wrapper #main {}

  height: auto;

  }

  #wrapper #navigation {}

  height: 30px;

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 18px;

  color: #000000;

  }

  {#wrapper #div1}

  height: 9px;

  }

  
  

  #wrapper #bodyarea #left {}

  background-color: #FFFFFF;

  height: 200px;

  width: 757px;

  float: left;

  }

  #wrapper #bodyarea #bottom {}

  height: 50px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea #left1 {}

  width: 640px;

  float: left;

  height: 180px;

  background-color: #FFFFFF;

  }

  {#wrapper #autremoiintro}

  height: 110px;

  }

  #wrapper #bodyarea #right1 {}

  float: left;

  height: 180px;

  width: 250px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea #bodyarea1 {}

  height: 700px;

  }

  #wrapper #main page contact {}

  width: 890px;

  }

  #wrapper #body #bottom {}

  background-color: #FFFFFF;

  height: 50px;

  }

  #wrapper #bodyarea1 #leftcon {}

  float: left;

  height: 350px;

  Width: 465px;

  are-family: "Times New Roman", Times, serif;

  are-size: 16px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea1 #bottom {}

  background-color: #FFFFFF;

  height: 50px;

  }

  #wrapper #bodyarea1 #rightco {}

  float: right;

  height: 350px;

  width: 425px;

  }

  #wrapper #bodyarea1 #leftport {}

  float: left;

  height: 170px;

  width: 640px;

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 16px;

  text-decoration: underline;

  }

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  width: 250px;

  
  

  HTML {}

  Overflow-y: scroll;

  }

  And here is the html code for a page that does not move

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"

  autremoi < title > < /title >

  < style type = "text/css" >

  <!--

  {body

  background-image: url(images/background.jpg);

  background-repeat: repeat-x;

  margin-top: 0px;

  }

  ->

  < / style >

  < link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "

  < style type = "text/css" >

  <!--

  a: link {}

  color: #000000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #000000;

  }

  a: hover {}

  text-decoration: none;

  color: #CCCCCC;

  }

  a: active {}

  text-decoration: none;

  color: #000000;

  }

  {.style2}

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 24 PX;

  }

  .style10 {do-family: Georgia, "Times New Roman", Times, serif; do-size: 18px ;}}

  .style9 { do-family: Georgia, "Times New Roman", Times, serif; }

  are-size: 14px;

  }

  ->

  < / style > < / head >

  
  

  < body >

  < div id = 'wrapper' >

  < div id = "header" >

  < div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""

  < div id = "rightheader" > < a href = "http / /" > < / a > < / div > ""

  < / div >

  < div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >

  < div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "

  < u > < span class = "style2" > team </span > < / u >

  < div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "

  < div id = "bodyarea" >

  < div id = "left" >

  < class p = "style10" > Mattaeus Ball < /p >

  < class p = "style9" > Mattaeus Ball is a professional photographer who has been published in the world. He is also a designer and set Builder. An all around artist with a taste for the magic and the macabre. Mattheus has & quot; eyes & quot; When it comes to making certain this one and is much more than a photographer! Mattheus is a visionary and loves nothing more to make her visions and live through his photographs. You want Mattheus can do with his countless talents and imagination. < /p >

  < class p = 'style9' > < / p >

  < / div >

  < div id = "right" > < img src = "images/matt.jpg" alt = "matt" / > < / div > "

  < div id = "div3" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "

  < div id = "bodyarea2" >

  < div id = "left" >

  < class p = "style10" > < u > Roseanna < /u > < / p >

  < class p 'style9' = > Logan is our head makeup artist. His work speaks for itself, we have searched high and low for an artist who has the whole package and with Martin, we have all this and more! Roseanna vellum is published internationally and has worked for Torture Garden and the clothes Show Live, to name a few. Unique and inspiring Roseanna can help your imagination to life. < /p >

  < / div >

  < div id = "right" > < img src = "images/roseannanew.jpg" alt = "roseanna" / > < / div > "

  < / div >

  < div id = "div4" > < img src = "images/div.png" alt = "div3" / > < / div > "

  < div id = "bodyarea3" >

  < div id = "left" >

  < class p = "style10" > Starla James < /p >

  < class p = "style9" > Starla James is a professional model, the creator of prop, the dresser of the wig and the stylist. She has worked in different genres within the modeling industry. Charles-Antoine has worked with officials in the past but prefer finding his own work that allows his imagination without limits and current. Has dabbled in the popular genres of pinup and Gothic modelling, she sees herself as more of a model with no particular genre, taking gas from different eras and styles to make his own. Knowledge of Charles-Antoine of fashion through the eras is comprehensive and accurate. < /p >

  < / div >

  < div id = "right" > < img src = "images/starla wrath.jpg" alt = "starla" / > < / div >

  < / div >

  < div id = "div5" > < img src = "images/div.png" alt = "div5" / > < / div > "

  < div id = "bottom" > < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  It's one of the pages that moves the html code
  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"

  autremoi < title > < /title >

  < style type = "text/css" >

  <!--

  {body

  background-image: url(images/background.jpg);

  background-repeat: repeat-x;

  margin-top: 0px;

  }

  ->

  < / style >

  < link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "

  < style type = "text/css" >

  <!--

  a: link {}

  color: #000000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #000000;

  }

  a: hover {}

  text-decoration: none;

  color: #CCCCCC;

  }

  a: active {}

  text-decoration: none;

  color: #000000;

  }

  {.style2}

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 24 PX;

  }

  body, td, th {}

  are-family: Times New Roman, Times, serif;

  are-size: 16px;

  }

  ->

  < / style > < / head >
  
  
  < body >
  < div id = 'wrapper' >
  < div id = "header" >
  < div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""
  < div id = "rightheader" > < img src = "images/facebook.jpg" alt = "facebook" width = "150" height = "46" / > < / div > "
  < / div >
  < div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >
  < div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "
  < u > < span class = "style2" > Contact </span > < / u >
  < div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "
  < div id = "bodyarea1" >
  < div id = "leftcon" >
  < p > other me < /p >
  6 unit < p > < br / >
  Clements Mews < br / >
  5 avenue of Stevenson < br / >
  BH4 8ED < /p >
  < p > < a href = "mailto: " [email protected] "> [email protected] < /a > < /p > "
  < p > 07989414201 / 01202-778414 < /p >
  < p > Note: keep double clicking on place to zoom in < /p >
  < p > < br / >
  " < small > view < a href =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & source = embed "style =" color: #0000FF; text-align: left "> location < /a > on a larger map < / small > < / p > "
  < / div >
  < div id = "rightco" >
  " < iframe width ="425"height ="350"frameborder ="0"scrolling =" "marginheight ="0"marginWidth ="0"src =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & o utput embed = "> < / iframe > .
  < / div >
  < div id = "div4" > < img src = "images/div.png" alt = "div4' width = '890' height = '8' / > < / div >"
  < div id = "bottom" > < / div >
  < / div >
  < / div >
  < / div >
  < / body >
  < / html >
  
  

  
  

  Thanks in advance for your help.

  -Change

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  Width: 250px;

  HTML {}

  Overflow-y: scroll;

  }

  on this subject.

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  Width: 250px;

  }

  HTML {}

  Overflow-y: scroll;

  }

  Note the braces - one of you was missing.  Use it instead of the suggestion of Ken.

• Problem with web url assignment to button

  I have a file decompiled swf which I modified heavily composed of two big buttons with identical behavior. When I assign a url to the layer button after double clicking the left button, then the right, the behavior are both applied to the same sprite who, seen in the library, represents only the left button ("url one"), while the second url is missing. There are two separate layers for each button on the stage, but I can't get distinct URL applied to them because of that.

  I could just create two separate files, but which would add to the amount of code... Any suggestions?

  You are welcome.

  If that solves your problem, please mark this thread as answered.

• Problem with the play, pause, stop buttons etc on Satellite M30 842

  I have tried pretty much everything I can to get these buttons to work, but it seems that their just their for pleasure. any suggestions?

  I also wonder if anyone knows if it is possible to download the drivers for the sd card reader able to read cards mmc...?

  Hello

  I put t believe that the buttons were eating here just for fun. If the laptop is not preinstalled with recovery CD all tools must be installed correctly. I don't know, but TOSHIBA controls V3.01.0400 tool is responsible for this button.

  To read SD cards, you need to install a tool SD Card Driver Set V2.0.4 and TOSHIBA SD Memory Card Format V2.0.1.1. Try it.