Problem with open.window does not

Similar Questions

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Problem with opening Windows store after upgrade to 8.1 Windows

  Original title: cant access window 8 app store

  I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

  Help, please.

  Hello

  Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. are you able to open other Apps of metro?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupt the App Store.
  2. Incorrect settings App.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Method 2:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Hi guys,.

  I hope you can help, I bought an Asus Vivo tab RT with month windows RT 13 there, I used it only for the first two weeks after I bought and then travel. I went back to find he does not start and going to a blue with 0 xC0000001 error screen after several attempts of the operating system on your PC could not start, so it needs to be repaired.

  It is now one month out of warranty and ASUS refuse to provide support for me, I used the recovery media to reset the Tablet, but still he starts to this message.

  I'm not sure what I can do, I'm totally stuck. Can anyone offer some advice on what I can try? anything via the command prompt?

  At this point I have an expensive paper weight.

  Thanks in advance

  Joel

  Hello Joel,
   
  Usually, the error code 0 xC0000001 indicates that winload.exe in C:\Windows\System32\Boot could not be found or is corrupted. This could be the result of a corrupted download, before the creation of the operating system.

  Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  I'm really sorry not to be useful in this regard.

  Please do not hesitate to contact us for any further assistance on Windows.

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Problem with Photoshop CC does not work after update

  I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

  So I installed which.

  Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

  is the hit Control-Alt-Delete.

  What can I do to fix this?

  David

  Hi dneely101,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• I have a problem with my printer does not print not the computer it's a software problem, a problem in device driver or a service pack problem

  I'm having a problem with my printer. he do not print on the computer. He told me that it is connected. Is this a problem with windos vista or is it a problem that I need to upgrade to service pack 2 and how do I know which service pack I have.

  Hello

  ·        What is the model and brand of the printer?

  ·        What happens when you try to print?

  ·        The printer worked fine before?

  You can run the fix in the here is given a link and try the solutions too.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Problems with the keyboard does not

  I am on windows 7 and for a week, my keyboard does not work. some of the keys do not work. p, return, tab key, and a few others do not work. My on-screen keyboard works fine - except for the question mark-. I tried the drivers, and the computer says that it has the best drivers so no need to update. I don't know where it came from, but then, after an update of windows, my keyboard is back to normal. It worked fine for three days and then, once again, he screw up. It's always the same keys that don't work, so I don't think that my keyboard is worn. my computer is only a year. It's a computer laptop sony vaio. whenever I press the p key, for example, the Start button - a physics - flashes. same thing for the other buttons. When I press the return key, the Start button flashes.

  in the bios, the keys do not work either.

  can anyone help

  Get a cheap USB keyboard and see if it works.  You can buy those cheap for $10 or less.  The fact that the keyboard does not work in the BIOS means is not a Windows problem.

  Good luck.

• Having a problem with my page does not stop scrolling?

  Hi, I am very new to Muse and have been plugging away learning and design. I came across a new issue where when I go to preview my site, that my pages are not self limiting the amount of content I have on her page, if that makes sense.

  On one page, I have a picture of style small hovering with a small text below, does not come close taking over my office around, but there are still some amount scroll down on the page. On another page I have an image gallery and if you scroll down it just guard putting a space more photos below and you can scroll basically forever. Any contributions to this issue would be greatly appreciated.

  Thanks, Ben

  That's great! An easy solution: simply omit the widget!

  I paid for the widgets (like others) that presented of problems... when all else fails, stick to what provides the Muse. Frustrating at times, but they do not work.

  (Can also be useful to meet with the developer and asking for a solution/explanation)

• Problem with complex schema does not

  Hello

  I created the fairly complicated pattern: http://i.imgur.com/Wt2Bo7w.png

  And when I'm playing with him (some pathfinder to the cutting edge etc.) Illustrator is "not responding" problem and after a few minutes it comes back to life (with process finished). It's weird because my machine is pretty good and Illustrator, while that "does not" use only 30% of my CPU and about 6 GB of ram (I've got 16 GB). Is there a way to make it faster? What would you recommend?

  Try using fill patterns.

  Or try to use overlays raster graphics