problem with parental lock

Similar Questions

• problem with the locking of the data

  Hi all
  
  I'm having a problem with the locking of the data.
  
  When I was trying to lock FY12 real periods. We cannot block periods. The consolidation runs perfect and all entities have the status of OK and all levels of the process are published, but when we try locking... We receive an error that "Consolidation, calculations or translations are required.
  
  Published by: user10926115 on October 16, 2012 10:34

  We had this problem with our application, as well. I don't know what causes it, but I can advise on our solution.

  In your grid lock, change your Value [None] member. Bear has the value and shows that all entities are in a State of OK or OK SC. However, when we go to the [none] member value, we see that some entities still need calculation. Select the groups that aren't in an OK OK SC or ND OK and select 'calculate '. Once solve us this problem in the [None] member value, we have no problems with locking or unlocking of these entities for periods that have been addressed.

  I would like to know if it works for you.

  Also, if someone else may be able to weigh in on the root of this problem, it would be certainly appreciated by more than just the op.

  Thank you!
  Scott

• I want to delete an add it becauase I've had problems with FIrefox lock because I installed it. How the hell a removes an add-on. I hate to be stupid, but I can't figure out how to uninstall an add-in on

  I had problems with Firefox 4.0 locked pretty much since I installed it. I have add a few Add-ons and all I can think to do is to remove them. I can't figure how to get rid of them.

  On the left side of the window, did you go to the bottom of the list "Extension"? The other.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• Problems with parental control - clicking 'Allow' has no effect and the apps / programs that are permitted by the user are not allowed.

  Hello.

  I use Windows 7.

  User account from my son has parental control of Microsoft Watch.  It cannot open an iTunes account.  When he tries to do, a widow who opens shows the administrator permission is required.  We ask in person, I type my password.  Nothing happens.  iTunes will not open and if it clicks again, the same window again.

  Another problem is that iTunes is blocked at all.  Why is this?  In my account of parental control of Microsoft, I have the option 'ALLOW' next to iTunes.

  NOTE: this problem, namely, nothing happens when I enter my password to give permission to my son for a program or a Web site, it happens a LOT.  It occurs not only with iTunes.

  Hi Robert,.

  I understand the frustration when things don't work as expected.

  Solving the problems of family security
  We will run the resolution of the problems of parental control and check the status.

  How to update the family safety filter?

  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ

  Family Safety: frequently asked Questions

  https://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• problem with the locking insert and delete between two linked tables help please.

  Hi guys I have a problem with a table of locking in Oracle forms, but when I try in SQL happens here too many users. I was wondering if anyone can shed some light on this?
  
  I created two scenerios one that works and is not based on the primary key and foreign key constraints (but one that works is not possible for us because it would mean change design table that we can not do).
  
  I've hardcoded in 1127,1128 number to make it easier (in reality it is a sequence)
  
  OK scenerio one (our scenerio)
  
  two tables
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_REF_SL NUMBER(8,0), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN,LABP_REF_SL)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN,labp_no)
         REFERENCES TESTSFLABPR (LABP_REF_IRN,LABP_REF_SL) ENABLE
     ) ;

  OK now session is done the following
  

  DELETE FROM      testSFLABPR     WHERE   LABP_CONFIG_ID            = 1127;          
                 
  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_SL,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127,
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  session one remains in this State.
  
  second session now does the following

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;     

  second session is now locked until a commit or rollback occurs.
  
  If I run the exact scenerio even with only a primary key on the table without locks held
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN)
         REFERENCES TESTSFLABPR (LABP_REF_IRN) ENABLE
     ) ;

  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;

  I hope I posted all the information that is relevant... version of DB were is Oracle Database 10g Release 10.2.0.3.0 - Production
  
  Any help is appreciated...

  Creating indexes on columns of the FK. Something like:

  CREATE INDEX testFK_SFLABP_SFLABPR_IDX
  ON testSFLABP(LABP_IRN,labp_no)
  /
  

  SY.

• Problem with re - lock the bootloader

  Hi can you please help me with the problem re - lock?

  A summary of what has past.

  After kitkat 4.4.3 GPS upgrade (from 4.4.2) stopped working, tried everything: reboot, airplane mode, clear the cache, factory reset, etc...) After these procedure, something bad happened and I was not able to start my Moto X, in the boot animation, it stops.

  The search in the forum much, the only solution was unlock bootloader and RDS (fastboot) 4.4.2 - Brazil to the detail of the Motorola site.

  After this Moto X was alive, but GPS still does not work, it detects the satellites, but their power level increases not (test GPS or GPS status app), when you change the precision, he complains that GPS should be on (but it's on).

  So I wanted to send it to repair, because it seems question HW.

  Now, I tried to re - lock the bootloader (according to the procedure of re - lock of motorola) but in the first command, I get the following message:

  Explanation of the risks of unlocking the bootloader can be accessed hereand the terms legal can be found here.

  In legal terms, he said, "the user understands and acknowledges that, because it can be difficult or impossible to know if or ohow a device has changed once its unlock code has been delivered to the user, Motorola disclaims any responsibility for any use of a device either, once he provided the unlock code for the device.»

  Maybe someone here in the developer community can offer advice or suggestions... in the meantime, have you tried the convenience store?

• problems with parental controls

  I tried several times to block specific web sites on my daughters account. I followed the instructions in the help to the letter, but my daughter is still able to access sites blocked and other sites that are not on the green list. I tried with its connected account and making the changes, but it makes no difference.  Has anyone else had similar problems and can help you?

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Setting up Windows Vista's Parental control

  Above, would be about the best tutorial on the Net relative to setting up Parental controls.

  See you soon.

  Mick Murphy - Microsoft partner

• A problem with the lock 10 - Bug ios screen?

  Bug:

  Steps to follow:

  1. slide right on the lock to go to Widget screen screen

  2. scroll and click 'CHANGE '.

  3. Requests that an access code

  4. change the Widgets in the "ADD WIDGETS" screen

  5. click on done

  6. the onus is on the screen of Widgets

  7 now drag to the right and click the 'home' button the phone unlocks without asking for a pass code.

  
  

  My pass code is set to require immediately

  Everyone has the same problem?

  You already unlocked the device once and like you don't a not lock again when you changed the widgets, it remains unlocked. This is how it works on my iPad that comes, I have updated to iOS 10.

• EA6350 - problems with parental controls

  I bought the EA6350 almost a week ago.  Implementation has taken every 30 seconds - a big change of the time to fight with my last Belkin router.

  Internet was fast and I love the parental control.

  After a few days, the parental control just stopped working properly.  Devices that were on the schedule would be blocked from internet for 24 hours.

  There are also random slowdowns that affect all users, even the times not on.  Disabling parental settings causes everything to run smoothly once more.

  Let's you have updated the firmware on the router, hlmichel. Please follow the steps on this link and download the firmware here. Make sure you download the appropriate firmware version that matches the version of your router. Once you're done, rebuild and reconfigure the router, then test again the parental control. An update of the results.

• problem with the lock on the xperia neo screen

  How the lock screen is looking? for my neo when I press the release button it unlocks just she dislikes in the Go when I need to slide on the screen... is this normal? I saw a few screens of xperia pro and the device of the slide to unlock screen is still there...

  Can you please go to the following and advises that it is selected.

  Menu > settings > Security > lock screen

• Problem with interlocking entities

  Hi all

  I have problems with my locking entities. I locked them up to what Q2 but the problem is when I try to lock Q3. Some entities are as locked for the period of July. So, when I try to unlock July, I get the error next "node value for all parents of the selected entity who have selected as default currency members be unlocked"

  I tried looking at some old messages in this forum and I tried their solution (https://community.oracle.com/message/10640755#10640755). It still does not for me.

  I have attached a screenshot to show the dimension of value < entity currency > vs [no]

  

  All entries are greatly appreciated.

  Thank you

  Steffi.

  Hey Steffi,

  Do you have alternative hierarchies that you share these entities? I think you need to unlock all the parents of all hierarchies.

  See you soon,.

  Thanos

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• Publish with essbase lock and send

  I am facing a strange problem with my lock essbase and send. For example if there are 2 lines in the worksheet we need loack and send data, if a member of the second row who is mentioned is incorrectly or not present in the outline, essbase replaces the invalid member with the Member of the same column in the previous row, and sends the data instead of reject the line It's the origin of the data issues. I want the second row is rejected by the lock and send, I use essbase excel addin. the version of the addin is 11.1.2.0 and execution of upload essbase server version 11.1.2.4.004. Could someone please help me solve this problem.

  Hello

  what you describe is a common feature. Unknown member (or comments) are ignored in SmartView, but when the application can be designed by taking the last known member of the dimension, the query (and lock operation and sending) are carried out.

  For example, there are 2 dimensions in rows, the period and the scenario.

  He comes to work and click OK:

  Real 11 Jan

  Budget of Jan 10

  Real 11 Jan

  Budget 10

  This will work, Budgets is misspelled, and when we let out, you see a bad request:

  Real 11 Jan

  Budgets of Jan 10

  Real 11 Jan

  Jan                     10

  This will work, Jans is spelled wrong, and when we let out, correct query will appear:

  Real 11 Jan

  Jans Budget 10

  Real 11 Jan

  Budget 10

  This will happen at your side. Smart View has (for me) not a real feasible option to come around that. It goes same for formulas - the result of these will be loaded with lock and send.

  Kind regards

  Philip Hulsebosch

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help