Problem with PSE - 2 and the new 1.5 TB drive

Similar Questions

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Anyone having problems with Windows 7 and the HP LaserJet P2035n?

  It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

  TechNet forums

• Re: Problems with Win7 boot on the new Satellite L670-17 x

  Hi guys,.

  Three days ago I got my new Toshiba Satellite L670-17 x. Installing Win7 was not a problem, but now (after the start of the third or fourth) I suddenly a big trouble with the operating system.

  When I turn on my laptop, it loads up until I can see the Windows loading screen. Then - both - the laptop stop working... I can only see the loading screen, but nothing happens. Turns off the light litte to the frontsite (which shows that the specifications of load/work). No error message.

  I want to avoid using the Toshiba HARD drive recovery, because I saved (important) documents on the desktop (I know... not very smart). I ask you to help me with my problem.

  (By the way: I already tried Windows repair system, System Restore memory diagnostic tool and start Windows Mode without failure).

  Thank you very much for your answers!

  If you cannot boot OS in safe mode, that, in my opinion, you have a big problem. I'm afraid only installation of HARD drive recovery will help you in this m.
  The question is what to do with this data.

  Perhaps you should remove the HARD drive and connect it to another computer to have full access to all of these external data. Copy them, replace the HARD drive in your Satellite and install the OS by using HARD drive recovery option.

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with configuration properties and the java plugin

  Hello
  
  I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
  ' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
  Wait I use properties by default, then I don't get any errors.
  
  What is the problem?
  
  MyAutoDiscoveryServerDetector.java
  ---------------------------------------------------------------------------------------------------------------------------
  SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements
  
  {AutoServerDetector}
  
  public list getServerResources (ConfigResponse platformConfig)
  
  get {PluginException}
  
  Server list = new ArrayList();
  
  Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));
  
  ConfigResponse productConfig = new ConfigResponse();
  
  productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
  productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
  productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
  productConfig.setValue ("myValue", 10);
  
  server.setProductConfig (productConfig);
  
  Servers.Add (Server);
  
  return of the servers;
  
  }
  ---------------------------------------------------------------------------------------------------------------------------
  
  HQ - plugin.xml
  ---------------------------------------------------------------------------------------------------------------------------
  <? XML version = "1.0"? >
  < package = "com.citytechinc.articles.hyperic.plugin plugin" >
  
  < name of the filter = "domain" value = "My Auto Discovery" / >
  
  < name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >
  
  < plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
  < plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >
  
  < config >
  
  < name of option = 'myUrl '.
  
  Description = "Enter the URL for this resource"
  
  " default = ' http://127.0.0.1 "/>
  
  < name of option = "Description".
  
  Description = "enter a description of this plugin"
  
  default = "default my Auto Discovery Description" / >
  
  < name of option = "myTimeout."
  
  Description = "time-out for something in my plug-in.
  
  default = "0" / >
  
  < name of option = "myValue"
  
  Description = "a metric value.
  
  default = "10" / >
  
  
  < / config >
  
  
  < name metric = "availability".
  alias = 'availability '.
  Template = "System.avail:type = Platform:Availability"
  category = "AVAILABILITY".
  indicator = 'true '.
  collectionType = "dynamic".
  units = "percentage" / >
  
  < name metric = 'value '.
  alias = 'value '.
  model = "" MyPlugin:Type = value: value ' "
  category = 'USE '.
  indicator = 'true '.
  collectionType = "dynamic".
  units = "none" / >
  
  < / Server >
  
  < / plugin >
  ---------------------------------------------------------------------------------------------------------------------------

  UM,.

  This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.

  First of all, always check the server log, errors that appear it should lead to the cause.

  The plugin xml initialized ok on the server, or any error appear?

  You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
  If this isn't the case, errors occurred when starting the server, check the log.

  Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?

  Generally the pitfalls that come from these errors.

  Been there, done that.

• You can control volume with bluetooth headset and the new Apple tv?

  Hello community!

  I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

  Thanks for any help you can provide.

  You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

• I was wondering if there were other problems with Adobe CC and the last IOS El captain?

  I've recently updated to IOS Yosemite to El Capitan, when I went to launch Premiere Pro for the first time, there were a few very visible differences of how things went, if not, the program has worked very well.

  Thinking that this might just be a problem after installing just El Capitan, I thought that a reboot would clear things up. When I went to restart, I could not go beyond the initial start-up of the grey Apple screen, I ended up having to wipe the drive and reinstall El Capitan, nd, then migrate my data from my backup of TM, what a shot, it took hours to complete.

  Anyone else having similar problems? Anyone know when Adobe get out their CC to CE upgrade?

  I don't know about Apple (I'm on Windows), but I read that Microsoft has a way to restore the previous operating system if an upgrade to Win10 does not work

  I don't want to know about it, because my Win8.1 works with all my current software... I have read Win10 problems with the software that I have now, so I will NOT go to Win10

  If Apple does not offer a way back to the BONE you had before, I think you're stuck with problems until 'the 3rd party vendors' make changes to work with El Capitan

  And, if you do a "time machine" backup before the upgrade, be aware that TM backups do NOT work with Adobe because of... hidden folders software then you would need to uninstall and reinstall

  And just so you know, Microsoft has also problems with Mac 10.11 El Capitan

  -http://www.macrumors.com/2015/10/05/microsoft-office-2016-el-capitan-bugs/

• Problem with my account and the Group of

  Hey there,
  
  I have some difficulties to group by my result, and I ask for assistance in this forum.
  
  My table is really simple, have an Ilie and a COM domain that contain the string with line breaks. I want to count the number of group ResId by COM.
  
  My data in my table store have look like this:
  
  RESOURCE TABLE:
  ResId. COM
  1. Server: Walcot15.\nCOD M50
  2. Server: Walcot15.\nCOD M55
  3. Server: Walcot16.\nCOD M55
  
  I would like to get as a result:
  
  Count (RESID) | COM
  2. Server: Walcot15.
  1. Server: Walcot16.
  
  First of all, I did substr in order to keep only the string that contains the server and not the \nCOD...
  
  
  SELECT
  County (RES. (' ' ID ') as "ResId".
  substr (RES. CMT, 0, instr (RES. CMT, Chr (10))) as 'COM '.
  
  Of
  
  RES THE RESOURCE
  
  WHERE
  
  REGEXP_LIKE (RES. ("' CMT ', 'Server', 'i')
  
  Group (RES. "" THE ID ", RES. CMT)
  order by
  1
  
  The problem is not count and group by server. Anyone help me, please?
  
  Kind regards
  Jarod.

  Hello

  When you assign a column alias (for example, COM) in a query, you can't reference this alias in the same query (except in the ORDER BY clause). It is necessary to repeat the expression or affect the aliases in a subquery. Then, you can use the alias in any part of the request of the mother.
  For example:

  WITH     got_com          AS
  (
       SELECT     id
       ,     SUBSTR ( cmt
                   , 1
                   , INSTR (cmt, '\') - 1
                   )     AS com          -- Alias defined
       FROM     resources
       WHERE     INSTR ( UPPER (cmt)
                  , 'SERVER'
                  )     > 0
  )
  SELECT       COUNT (id)     AS count_resid
  ,       com                         -- Alias referenced
  FROM       got_com
  GROUP BY  com                         -- Alias referenced
  ORDER BY  com                         -- Alias referenced
  ;
  

  Output:

  COUNT_RESID COM
  ----------- ------------------------------
            2 Server : Walcot15.
            1 Server : Walcot16.
  

  If the idea is to have a production line for evry value distinct from com, the GROUP BY clause should not contain anything except com

  You will notice that I used SUBSTR and INSTR, above, in the places where you can also use regular expressions. This is because regular expressions tend to be much slower. If the speed is not a problem, and you prefer to use REGEXP_SUBSTR or REGEXP_LIKE, then it is fine to use.

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Win 8 activation problem with a clean istall the new hard disk

  GET THE ERROR MSG THIS PRODUCT KEY IS UPGRADE. IT IS SOMETHING THAT THEY COULD NOT ADVERTISE

  In order to install Windows 8 Pro upgrade, you must first reinstall your original version of Windows that has been run on your computer before installing the Windows 8 Preview version. If it's (Windows XP, Vista or Windows 7). After installing it, you can then do a upgrade to Windows 8 Pro. The output preview Windows 8 does not support upgrades to Windows 8 Pro.

  Try activating the phone and see if it works, otherwise, you will just have to reinstall a release candidate and try again:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Oracle Weblogic domain creation problem with Webcenter portal and the content of the products.

  Hello

  I tried to create a new domain weblogic support webcenter portal and content products. However, I got the following error on the progression of 70%:

  --------------------------------------------------------------------------------------------------------------------------

  Preparing...

  Extract the contents of field...

  Creating new domain security information...

  Failed to create in the domain!

  Location of area: C:\Oracle\Middleware\user_projects\domains\base_domain

  Reason: null

  Exception:

  Traceback (innermost last):

  "< Iostream >" file, line 86, in there?

  ImportError: no module named javaos

  --------------------------------------------------------------------------------------------------------------------------

  Server operating system: Windows Server 2012 R2

  FMW Version: 11.1.1.8

  Your help would be greatly appreciated.

  Thank you

  Cyrus

  Hello

  Did you add the name of your operating system (Windows Server 2012) in the javashell.py file?

  After you add the name of your os you must re-create the jython file - modules.jar.

  Use after command to generate the jar again

  jar - cvf jython - module.jar Lib META_INF (records created after extraction of the jar file)

  I have also been facing same problem, solved by above to get around.

  -Prashant

• Hello, problem with adobe story on the new Safari

  Hello and sorry for my English

  My problem: on this site, my version of the Safari browser is not valid (for accuracy I am on Mac OS el capitan)

  Here the error message or warning-->

  'Browser not supported '.

  We're sorry, but your browser is not able to run Adobe Story
  If you can, please proceed to one of the following browsers:

  Apple Macintosh OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
  Safari 3.x on Leopard
  Safari 5.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  Microsoft Windows
  Internet Explorer 8.x or 9.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  
  

  If you're feeling adventurous, you can use the link below
  try Adobe Story in your browser not supported. Please bookmark
  the link below to bypass this warning in the future.
  Start Adobe Story with a browser not supported"

  
  

  I wonder if Adobe provides an update?

  or

  one way to solve the problem

  If anyone has a solution that allows me to stay on safari... I take

  Thank you

  After you open the site, simply click on the link "start adobe story...". "downstairs.

  Just make sure you have flash player installed like history depends on. You can get the latest from http://get.adobe.com/flashplayer