Win 8 activation problem with a clean istall the new hard disk

Similar Questions

• HP Pavilion DV6-6c35dx: potential problems with OS driver install the new hard drive?

  I want to spend the hard drive of my laptop, but my laptop did not come with recovery discs. I buy a full copy of Windows 7 Professional, but I did save it... because when everything has failed, I guess. If I'm able to reinstall Win 7 Home or if I have to install Win 7 Pro, how can I be sure to reinstall all drivers HP (p. ex., trackpad, meaning cool, beats audio, etc.) for my machine? It is best to download the drivers before you install the new hard drive and have them ready on a flash drive. or is there an easier way? Thank you.

  I personally prefer the new OEM installation & then get required drivers to download for HP support for your laptop model.

  It is slower and more difficult to do if it is not too well known, but the end result is much better.

  If your system has flaws you should try to fix first, but better long-term results come from clean install generally.

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with PSE - 2 and the new 1.5 TB drive

  Hi all. First of all, I use my PSE - 2 recorded for several years without problem. AMD Athlon 7750 2.7 Ghz, 2.0 G memory bicoeur. WD 1 .5TB primary and WD 500 GB secondary drive. Win XP SP3. I recently had a disk fails and installed a new freshly formatted WD 1.5 TB as my boot drive. New installation of Windows XP and updates. When I install the elements, it now seems to install fine. The problem comes when I try to run the first time that I get "could not initialize Photoshop Elements because scratch disks are full '. Then elements shut, not allowing no not me nothing to do with configuring internal program. I tried unistalling and installing on the 500 GB drive, but still not the same error. I increased my page file memory does anyone know of a problem with the installation of the elements on a large drive or can anyone offer a possible solution to what I see? Thanks in advance for suggestions...

  
  

  JohnR.

  I think Barbara meant photoshop 7, which was a little before pse2.

  If you hold them Alt + right Ctrl keys after starting pse2, a dialog box

  should appear allowing you to choose the drive working (keep holding

  keys until the dialog box is displayed)

  If you have a recovery partition on your hard drive, try this to choose

  the drive working, then exit pse2. Then restart pse2 and

  Preferences > Plug-ins and Scratch Disks choose your hard drive regularly to the scratch disk.

  Newer versions of the EPS, the newer less than 3 or 4 don't seem to have this problem.

  MTSTUNER

• Re: Problems with Win7 boot on the new Satellite L670-17 x

  Hi guys,.

  Three days ago I got my new Toshiba Satellite L670-17 x. Installing Win7 was not a problem, but now (after the start of the third or fourth) I suddenly a big trouble with the operating system.

  When I turn on my laptop, it loads up until I can see the Windows loading screen. Then - both - the laptop stop working... I can only see the loading screen, but nothing happens. Turns off the light litte to the frontsite (which shows that the specifications of load/work). No error message.

  I want to avoid using the Toshiba HARD drive recovery, because I saved (important) documents on the desktop (I know... not very smart). I ask you to help me with my problem.

  (By the way: I already tried Windows repair system, System Restore memory diagnostic tool and start Windows Mode without failure).

  Thank you very much for your answers!

  If you cannot boot OS in safe mode, that, in my opinion, you have a big problem. I'm afraid only installation of HARD drive recovery will help you in this m.
  The question is what to do with this data.

  Perhaps you should remove the HARD drive and connect it to another computer to have full access to all of these external data. Copy them, replace the HARD drive in your Satellite and install the OS by using HARD drive recovery option.

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

• Hello, problem with adobe story on the new Safari

  Hello and sorry for my English

  My problem: on this site, my version of the Safari browser is not valid (for accuracy I am on Mac OS el capitan)

  Here the error message or warning-->

  'Browser not supported '.

  We're sorry, but your browser is not able to run Adobe Story
  If you can, please proceed to one of the following browsers:

  Apple Macintosh OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
  Safari 3.x on Leopard
  Safari 5.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  Microsoft Windows
  Internet Explorer 8.x or 9.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  
  

  If you're feeling adventurous, you can use the link below
  try Adobe Story in your browser not supported. Please bookmark
  the link below to bypass this warning in the future.
  Start Adobe Story with a browser not supported"

  
  

  I wonder if Adobe provides an update?

  or

  one way to solve the problem

  If anyone has a solution that allows me to stay on safari... I take

  Thank you

  After you open the site, simply click on the link "start adobe story...". "downstairs.

  Just make sure you have flash player installed like history depends on. You can get the latest from http://get.adobe.com/flashplayer

• Problem with Windwos license on the new HP Pro 3500 Series

  Ho UN pc HP PRO 3500 labor-intensive (con Windows 8 downgraded a Windows 7)

  Sul pc non c'e ' the con adesivo licenza PT di Microsoft Windows. Sono dal tool fits, me lo sono fatto auswechseln, my e' lo stesso, anche questo senza adesivo! COSA posso fare?

  Translate...

  I bought a PC HP PRO 3500 (with Windows 8 downgraded to Windows 7)
  On pcmissing the sticker with the Microsoft Windows license. I went to the dealer, I have replaced it, but it's the same thing, more without this sticker! What can I do?

  Sorry for my English. Thanks for any response.

  Oh, I'm sorry that I misunderstood. I'm not sure about this. You might want to contact HP support and see if there is a reason that the sticker was not on your computer and see if maybe they can provide one for you. I'm sorry that I have no more information.

• I was referred to this site. Problems with installing Windows on the new drive.

  Greetings!

  I just installed a new hard drive on my Mini 311 1037. I bought the HP recovery discs. The operating system is Windows 7 Home Premium (I guess it was the correct operating system for that computer). The installation seemed fine, but after installing the drivers, I get the message, "Windows Setup could not configure windows to run on a hardware on this computer."  Then after the restart, after the initial windows screen, I get a message that says "Windows cannot complete the installation. To install Windows on this computer, run the Setup again. "I atempted to iireinstall 3 times. All diagnostic tests are good: the hard drive, the memory. I have no idea what to do next. Help, please?

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Use the installation of Windows 7 USB/DVD tool to convert the ISO file you download. Link and instructions below. You need to a DVD + R or DVD - R. Or a flash drive 4 GB to use the USB method.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool#installation

  Use 25 characters on the COA key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then, go to the page support and driver to install the drivers you need.

• problems with laptop computer on the new Lightroom download

  Hello! I bought a prepaid card and I used it to download lightroom on my laptop. He worked a lot on my pc, until about a year later, I received a macbook and downloaded lightroom. I have the trial version free on my mac and then clicked on software license. I typed in my redemption code and it doesn't have a valid redemption code or something like that. How can I get the full version that I bought on my new laptop?

  Use your license lightroom serial number by clicking Help > sign in/activate/license

• Removed the HARD disk with MBR/BCD who installed Vista x 64 Business on the new HARD drive

  I have vista x 64 business installed on a HARD drive, but it was (and still is) installed on an older HDD aswell and the smallest, the result being that when I removed the old hard drive to put in another computer, I was unable to boot the copy of vista on the new HARD disk as the MBR or the BCD bit that allows me to choose what vista start is on the old HDD. Using the installation DVD I can get up the command prompt and run Bootrec.exe without the old HARD disk installed, which can find the vista installation, but fails to solve the problem. I'm not an expert so I can't properly use Bootrec.exe, and startup recovery also does not work, although it seems to say that something to do with the startup has been fixed. Is it possible that I can get the computer running without the old HDD without having to reinstall vista on the new hard drive? Currently, I put the old HARD return drive to start the new installation of vista.

  When you move an old hard drive to a new computer, the installed operating system will find new hardware (motherboard, etc.).

  A clean install is a normal requirement, as no drivers are installed for the new hardware on the operating system.
  Thus, it will not start.

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L30: CD player does not work with the new HARD drive

  Hello

  Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

  My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

  However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

  The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

  Person not answering, so I'll do it.

  I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

  It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Activation problem with new hard drive on another computer.

  When I upgraded to Win 8 on my pc, I decided to install my copy of Win7 on my computer laptop girls as well as an upgraded HARD drive. As we had all two Dell Inspiron Laptops and his laptop was in use, I installed the new HARD drive in my laptop and proceeded to the installation and updates at my ease.

  I made the mistake to activate the Windows 7 successfully while the new HARD drive in my laptop.
  My problem is when I mount the HARD drive in my Dell laptop, it took re activation of girls and he does not accept the key.
  Can anyone help?
  Thank you, Simon
   
  Original title: the woes of Activation

  14 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can purchase a license upgrade and convert the license for use on the new system:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

  When you get the license for the corresponding edition, follow these steps:

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter the new product key, and then click next to activate via the Internet.