Problem with quick launch

Similar Questions

• Problems with the launch and printing from Internet Explorer 10, with updates of Windows Installer and start-up and shutdown of the computer.

  Original title: IE 10 freezes work stoppages and turns off

  I use it is to say 10 since I have a new computer in 2012 have not had problems, but for the last week, if I try to print something from my mail I receive IE has encountered a problem and closes the page and restarts it so go to Mozilla to print, yesterday IE was out completely had to return to Mozilla to get on the web. I have also had problems with my computer do not completely stop or does not start, I get to the part type to password in the and he died, tried to install optional updates in windows and it has not does anyone know what I can do to solve the problem. would really appreciate it

  Hi Mark,

  Have you tried the steps I suggested in the previous posts? If this isn't the case, please try these steps and check if that helps.

  You can also try the steps outlined in the article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• BlackBerry 10 problems with quick keyboard input?

  Curious to know if the owners non - Q10 this experience? If you do not have a Q10, try the following actions that stir up trouble (typing while receiving a text or BBM, message or by immediately typing affter hit send) and I would like to know if the behavior is not the same on the Q10?

  I type very fast on my keyboard of Q10. Often the time when entering text, say in a text message or conversation of BBM, I will hit enter to send and to start writing again. With any iPhone or Android, you would just keep typing. Half the time, I need to re - select the area to keep hits again, or he starts to enter a few characters are echoed to the screen and the unit freezes during a seecond and then the text box is empty, even if the phone works normally after that. Is it a known issue for BB10 lock up like that, and is the duty to select the text box again after sending the default behavior? I have not found a way to disable it and it is very annoying.

  P.S. I'm the only person who can manage almost never hit the X in the circle on the browser to clear the url? I have to remove most of the time...

  Solved... apparently WhatsApp is to blame. Found a tip in the classic BlackBerry users forum which could be related to a memory leak. Deleted and instantly all my problems were solved... hmm...

• problem with quick mask... ?

  When I use the quick mask tool it still gives me the inverse selection... i need to reverse manually each time. What could be the problem? any advice would be appreciated...

  

  Double-click quick mask icon and make the change.

• The problem with the launch of "recovery."

  I'm sorry for the bad English, use google translator

  Everything in order:
  (1) device: ProBook 6570 b (H5E77EA # AKB)
  (2) records 'Recover' and 'tools' are not changed
  (3) two other disk has been modified after the installation of another operating system
  (4) initially, there was a Win7 Pro
  (5) it is necessary to return to the factory setting
  6) press f11 but nothing happens, start the operating system starts

  How to return a function back?

  You can buy discs of recovery or HP usb recovery media or partners of HP.

  How to order recovery disks

• Problem with quick editing in ESP 10

  How can I stop Community Help pop up when clicking on Auto Smart Fix in Adobe Photoshop Elements 10?

  Click on the Word Auto, not the bulb.

• A security update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) cause problem with Catalyst Control Center

  I use the HP Pavilion G6 1117tx with

  AMD Radeon HD 6470 M driver version 8.882.2.0 i.e. graphics card and

  Intel Graphics HD 3000 driver version 8.822.2.0, it came as a complete with

  Microsoft Visual C++ 2010 version 10.0.30319 on the site of sellers.

  And after I installed upgrading security for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) it would cause a problem with the launch of the

  Catalyst Control Center version 2011.0817.2216.38121 the catalyst control center would launch and accident immediately but she always see the process running in the Task Manager.

  I removed all the drivers and the software associated with the control center catalyst with Microsoft Visual C++ 2010 and reinstalled all the package and tried the update, but still the same problem that led me to the conclusion the problem was with the update.

  Assistance would be appreciated. Thank you

  Good morning Mukul,

  Thank you for your response.

  I appreciate your time.

  Please refer to the suggestions marked as answer Andrew.Wu, Moderator on 24 January 2011 and check.
  https://social.msdn.Microsoft.com/forums/vstudio/en-us/10f5ba3a-b0bd-4f53-AC02-fa8634953dd0/Visual-Studio-2010-keeps-causing-display-driver-to-crash?Forum=VSSetup

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Please keep us updated on the status of the issue.

  Thank you

• problem with the Quick Launch bar - see the desktop icon missing

  original title: problem with the Quick Launch bar

  I've lost the 'show desktop' icon in my quick launch because of deleted by mistake the icon. I want that icon to return to the system to go to the office quickly within my work on computer... How can get that back?

  See How to re - create the icon of the Office see the Windows XP Quick Launch toolbar

• Problem with buttons to quick launch on HP Pavilion dv6-2090eo notebook pc

  Hey

  I have problem with my laptop, the button, mute and wifi sound suddenly stopped working from one day to the other. I can't turn off the sound and turn on wifi, so it is a huge problem for me and I don't know how to solve this problem, I hope some of you could help me solve the problem?

  My product number is: VS078EA #UUW

  I hope you can help me...

  Hello

  Try the following.

  Shut down the laptop, remove the AC adapter and remove the battery.  Press and hold the power button for a minute, then reinsert the battery, plug in the power adapter and start the laptop.

  Kind regards

  DP - K

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• HP Quick Launch buttons is not compatible with Windows 7

  Windows 7 Upgrade Advisor has reported that the driver for the HP Quick Launch Buttons 6.40F1 version is not compatible with Windosws 7. Does this mean that I won't be able to use the quick launch buttons. My laptop is a Pavillion dv 2410 us.

  I solved the problem by uninstalling the QLB from the Control Panel, then the upgrade with Windows 7 went through without any problems.

  The QLB work well with W7

• Do not click on & dray of desktop icons to the quick launch with Windows Vista.

  Evening... Maybe someone can help me with the problem, I'm going to not be able to click & drag one of my desktop for the quick launch icons.  It's on my husbands laptop (mine is fine), so I don't know how long it lasts.  Any suggestion would be appreciated.  Thank you and have a great rest of the weekend.

  Hello
   
  Are you connected to this main computer as ADMINISTRATOR?

  Maybe her husband, he is the lead director.

  I hope this helps.

   

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP dv6-2150us + Windows 7 64 bits + quick launch problem

  I have a new install of WIndows 7 64 bit on my HP dv6-2150us, and now there is a problem with the Quiclaunch buttons. Before my reformatting to get a clean install of windows 7, the quick launch buttons has worked, after the installation of the new, I have a problem. The problem is that pressing the volume buttons or button mute are not any notification on the screen. I can adjust the volume from the keys, but no statement is displayed (I need to check the volume slider in the bar of tasks to see how I increased or decreased it). Mute works also but still no notification.

  I installed all necessary drivers and the problem does not reolved. I wonder if windows 7 is somehow blocking notifications or if it's a problem with the application of buttons?

  Install 3RVX,

• DV8T HP Quick Launch Button problems

  On my HP Pavilion DV8T, my quick launch buttons keep it up. My wireless light turns off by itself, and in same time, my treble and bass will fluctuate. When this happens, if I type something in that she left the window, I'm and a treble/bass window appears. Also sometimes, like now, my mute button and my wireless button will not even appear or work. I have tried everything I can think, I have reformatted the hard drive, downloaded the drivers, and I've even sent in HP and they doesn't fix it. Any ideas would be appreciated.

  Thank you for your time,

  Cameron

  Hi Camde,

  This seems to be a problem reported by other users on the HP forum.

  Here's a link with some troubleshooting steps and some info on a patch, you can try:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-dv8t-1000-CTO-treble-bass-indicator-keeps-popping-on/m-p/220247

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.