DELL startup repair problem

Similar Questions

• Satellite C650-17Z: (new!) startup repair problem

  A few weeks ago, I used the Toshiba restore disk to fix my laptop to its original state. However, I have now faced a similar problem. I have shut down prematurely on startup 'Starting Windows' screen, which then caused the Startup Repair to launch when I rebooted my laptop a few hours later.

  What could be the results if the startup repair does not fix anything, since there is no set system restore points.

  Hello

  Wait a second time: your ad is a bit confusing

  This means every time on starting Windows screen, the computer stops and the next time you get message startup repair or what exactly?

  Hmm, what other programs and drivers that you installed after recover installation?

  You can start Windows in safe mode?

• startup repair problem.

  I have an acer aspire 5920 equipped Windows vista and only recently, it has had problems with the start up. whenever I turn on the laptop Startup Repair guard arise and checks the system for problems. After a few minutes its says "windows cannot repair this computer automatically" and "If you have recently attached a device to this computer, like camera or portable music player, remove it and then restart your computer...". "When I cliquerai finish it again the whole process.
  I tried running on safe reboot of the last good configuration mode. and it starts repairing appears again.
  Help, please. Thank you.

  As the system restore does not work, try this:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If this fails, the Acer Recovery Options:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  See you soon.

  Mick Murphy - Microsoft partner

• Startup repair problem - uwvwg.sys

  Computer Acer with vista... maybe not of course 32-bit

  Please bear with my long history

  When I start my computer, I get the Startup Repair... no matter what I do same in SafeMode or who were previously working mode settings or what it's called.

  It all started with a stop... which means that I held until the ignition button it closed because of my suspended computer itself.

  Then he started a loop of startup repair no matter how many times man I fix my computer it always starts the computer with startup...

  So I went to aid navigation. I tried to boot from the cd/dvd to install vista and repair from here, nothing...

  Then I saw a few posts that said he might have hardware problems and I need to contact acer... I tried to run several test to cehck if there is no hardware problem, but all the tests said no... tried something advanced startup repair, something called something memtest and also seatool if I remember correctly...

  Then I found some info on the use of cmd with commands like bootrec.exe... didn't work so I tried a last thing before that wierder

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  obtained from http://support.microsoft.com/kb/927392/en-us

  He rel screwwed my computer completely now, when I boot my computer without disk vista installation everything I get is a black screen with the text

  File \windows\system32\drivers\uwvwg.sys

  Status 0xc0000225

  Something important the driver file is damaged or missing.

  And then I tried to repair by there with my vista... instalation disks Startup Repair I then checked that the report of the repair and he could fix everything but this file uwvwg.sys error 0x2

  I also tried to do a reostre system to a previous point, but it seems my computer isn't everything.

  Is my last resort completely re-installing windows vista? I can't go directly to windows 7 same with my computer in this State? and always keep my files in c: drive?

  Please help... Thank you

  Yes. Here's how to recover data from a disk hard when you can't get to Windows:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Vista won't start and the startup repair can't find any problems

  Have a Dell Inspiron under Vista 64 bit, which does not start. I have inserted the re installation DVD and ran the Startup Repair which could not detect a problem.

  Diagnosis and repair are the following

  ----------------------

  Managed last start: 2010-10-23 21:12:44 (GMT)

  Number of repair attempts: 1

  Details of the session

  -------------------------------

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  ------------------------------

  Name: Search for updates

  Result: Completed successfully. Error code = 0 x 0

  Take time = 0ms

  The test is performed:

  ------------------------------------

  Test the disc name: System

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Name: Troubleshooting disk

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 218ms

  The test is performed:

  ------------------------------------

  Name: Metadata for the drive Test

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 62ms

  The test is performed:

  ------------------------------------

  Names OS test target

  Result:

  Completed successfully. Error code = 0 x 0

  Taking time = 188ms

  The test is performed:

  ------------------------------------

  Name: Checking content Volume

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 140ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic Boot manager

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 78ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic log for the system startup

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 16ms

  The test is performed:

  ------------------------------------

  Name: event log diagnosis

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 530ms

  The test is performed:

  ------------------------------------

  Rated: Internal audit of State

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  The test is performed:

  ------------------------------------

  Name: Start-up condition Test

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Root cause found:

  -----------------------------

  State of the start indicates that the OS booted successfully

  But the laptop still wont start I tried to run chkdsk/r from the command line and was unable to do as he says Windows cannot run disk checking on this volume, because it is write protected. I don't know what to do now anyone no matter what ideas thanks in advance.

  Seems odd. Startup Repair should have solved the problem.

  Have you tried new reboot running?

  Give it a shot...

  Any chance that you have a "backup computer?

  Try to do a full restore of the PC.

  See how it goes...

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• MS Vista startup repair couldn't fix the problem automatically

  Hello

  A little history - MS Vista was trying to install updates when the delivered system running. He failed. So I rebooted and it worked very well.

  When I re-started again after using it, even once, he tried to install updates. He failed. So I rebooted and it worked fine again. I went through the whole process several times in recent weeks.

  Then the other day, I got this screen start that says "Windows cannot repair this computer automatically. Since then, I can't get the computer started.

  The details of the problem are shown as:
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:524296 problem
  Signature of the problem 05: CorruptFile
  Signature of the problem 06: CorruptFile
  Signature of the 07:3221225624 problem
  Signature problem 08:3
  Signature of the problem 09: WrpRepair
  Signature of the 10:10 problem
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  In addition, all tests have been completed successfully, with the same error code = 0x0

  First cause is to the states that "Startup Repair tried several times but still not determine the cause of the problem."

  If I have to re - install the operating system again... I was not given a CDROM as a HP laptop... How can I actually re - install, when I do not have the CDROM?

  Also, I have some very important folders on the hard drive and I want to recover the files first before reinstalling the operating system...

  Any advice on how I can get before I have to destroy it by reinstalling the operating system would be greatly appreciated.

  Thanks to you all.

  As you don't have a Vista DVD, try this:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For recovery disk/s and/or the use of the recovery Partition:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

  Online 24/7 support for home and individual HP products

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• HP Pavilion dv6 starts request at startup startup normally or repair problem

  Hello, HP Pavilion dv6 starts to start normally or Startup Repair request. Results of normal boot BSOD too fast to read.

  Startup Repair in execution, but 13 hours still not repaired. What should I do? My computer knowledge is poor in good conditions, but I'm at the point of turning into an expensive Frisbee. The fact that I have to use this UM netbook that will soon be a Frisbee is driving me crazy!

  It's a venerable laptop purchased Feb 2010. It is a Pavilion DV6 (model DV6-2005-TX) running windows 7 Home premium (32 bit) and updates only did a request from Microsoft, so are a lot of patches and fixed security.

  Help will be very humbly and grovellingly welcome.

  Hello

  The error code is different from the first, it is still a short drive self test failed and confirms that the drive must be replaced.

  A brief overview of how to replace the hard drive is detailed below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Problem event name: StartUp Repair V2

  Please, please can someone be kind enough to help me to solve the problem of failure to start following with a vista running acer 5720 32 which took place after the installation of new updates. the machine does not start upnormally and there is no restore points available - even if a restore point created before the updates installed. Acer laptop - so no recovery disk or available installation floppies! managed to get in SafeMode (f8) run start up repair and last good known, but still no will start normally. continues to give this event log:

  Signature of the problem

  Problem event name: StartUp Repair V2

  Signature of the problem 01: Auto failover

  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:262147 problem

  Signature of the problem 05: no startup failure

  Signature of the 06 problem: no Cause root

  Signature of the problem 07:0

  Signature problem 08:2

  Signature of the problem 09: Wrp repair

  Issue 10:2 signature

  OS version: 6.0.6000.2.0.0.256.1

  Local ID: 1033

  Thank you very much guys for any suggestion - I need help please.

  Hello

  Is there an error message or error code then start you the computer normally?

  Try the following and see if it helps.

  Method 1:

  Try to boot to the last good known Configuration.

  Using the last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Note: Also make sure that you have disconnected all external devices except the keyboard and mouse.

  Method 2:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem: http://support.microsoft.com/kb/934540

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• BSOD: "a process or thread crucial to system operation has unexpectedly released or ended." Startup Repair does not solve the problem-

  I recently had a serious viral infection on my laptop Windows Vista SP2 Gateway.  After you run the antivirus AVG cleaner, who seemed to have had to quarantine or delete some files infected, System I couldn't Boot Windows to the top on this machine - even in the (all flavors of) Safe Mode.  When you try to start, I'd get

  a Blue Screen of Death with the msg of error in the title of this thread.  Before turning off the crash dump, the system indicated:

  ' * STOP: 0X000000F4 (0 X 00000003 0X85F22848 0X85F22694 0X82A26AB0).

  Other messages in the BSOD said I might have new HW causing the BSOD (I did not - but nevertheless I removed all external HW and tried again - got the same result).

  So one of the first things I did was to capture the startup log, so I could see what the pilots were hang up / does not.  Here's what I found:

  (1) the last driver to load (as indicated in ntbtlog.txt) was monitor.sys.  My understanding is that this indicates that when this driver loaded, the system crashed at this place - suggesting that there is 'something wrong' with this particular driver.  However, it seems likely, that I can use the screen/monitor (built-in) to the laptop without problem.

  (2) several drivers do NOT load: they are:

  1 NDProxy.sys

  2 Kvhfjgcv.sys

  3 Kbdhid.sys

  4 i8042prt.sys

  QUESTION 1: "Monitor.sys" being the last driver to load, should I assume this is the driver the system hung up on (that is, which caused the BSOD)?  And if so, that means I should replace this driver?  If so, how do I do that (how and where can I get a copy of 'Clean/good' of monitor.sys)?

  QUESTION 2: Is it possible to get "good versions" of drivers I listed above which was NOT loaded (I guess they didn't not load because they have been corrupted by the virus or the virus cleaner, or maybe just deleted by the virus cleaner because they were infected) to put into the Windows\System32\Drivers folder?  How?

  Here are the steps I took to try to fix the "corrupt system".  I inserted my Windows Vista DVD into the DVD drive and loaded Windows using that.

  Once that came, I then tried the following (and here are the results for all that I tried):

  (1) I selected the option "Repair", then choose "Microsoft Windows Vista" OS and press "next".  He tried to 'attempt to repair' for 15 minutes about, then finally stopped with a message: "Startup Repair cannot repair this computer automatically.  "Details of problem indicated: (a) the problem event name: StartupRepairV2." Signature 01: ExternalMedia; Signature 02: 6.0.6000.16386.6.0.6001.18000; Signed 03:6; Signature 04:131074. Signature 05: 0xF4; Signature 06: 0xF4; Signature 07:0; Signature 08:2; Signature 09: WrpRepair; Signature 10:5; OS version: 6.0.60090.2.0.0.256.1

  (2) I selected the option 'display diagnostic and repair details '.  He said that all tests successful (error code = 0 x 0), and

  then indicated the 'cause': ' unknown error checking: bugcheck f4, parameters = 0x3, 0x88607b80, 0x88607ccc, 0x82a78ab0. "

  - AND -

  Repair action: repair and checking the integrity of system files.  Result: failed.  Error code = 0 x 5

  (3) I checked that the restoration of the system, and even though I know I had some Restore Points created at the origin of this system, System Restore has indicated that there was no restore points to go back, (leading me to believe that the virus must have killed)

  (4) so I chose the selection "Command Prompt", which opens by default "X:\Sources >".  I'm in C: and then typed: "sfc/scannow".  The system has responded with the following messages:

  "Start system analysis.  This process will take time. " follow up 30 seconds later by the message:

  "Windows resource protection could not perform the requested operation".

  MAIN QUESTION: any reflection on what other tools and options I try to repair the windows installation / driver set?

  Hello

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/958233

  Method 2:

  Connect over winre and rename the driver files that he talked with *.old quick order. You can find these % system32%. Follow these steps:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  On the screen to install Windows, select the appropriate language to install, time and

  currency format and keyboard or input method options and then click Next.

  c. click on repair your computer.

  d. click 7 installation you want to repair, and then click Next.

  e. click on command prompt.

  f. navigate to % system32% and rename old files 8.

  Method 3:

  After step above the computer restarts. Run the System File Checker tool to troubleshoot missing or corrupted system files. Follow the steps from the link:

  http://support.Microsoft.com/kb/929833

• Vista does not start, go straight to the Startup Repair / can not solve the problem

  5 month old Dell Inspiron 1440, Vista system unbootable, goes directly into the Startup Repair tool, tried F8, tried restoring, tried booting in the safe, he always comes back to the Startup Repair

  Message
  Prob event name StartupRepair V2
  Prob GIS 01 AutoFailover
  Prob GIS 02 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03 0
  Prob 04 65537 GIS
  Prob GIS 05 unknown
  Prob GIS 06 NoOsinstalled
  Prob GIS 07 0
  Prob 08 1 GIS
  Prob GIS 09 FixPartitionTable
  Prob 10 1168 GIS
  OS version: 6.0.6001.2.1.0.256.1
  1003 locale ID

  Since this system is under warranty, call Dell, they tell me that it is a hard drive failure.  Is there anything I can try to fix?

  Thanks in advance

  Your Dell is 5 months old.

  It is under warranty.

  Dell will fix it.

  Do what Dell suggest regarding your warranty.
  Everything you do can void your warranty.

  http://support.Dell.com/

  Link above is Dell Suport.

  http://en.community.Dell.com/

  Communities of Dell at the link above.

  Here are the ways to back up your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• Startup Repair is checking your system for problems... and for the last ten hours!

  Apparently, during Windows updates last night, my laptop itself cut because it became overheated.  When I tried to turn it on this morning, it would not load my login screen, giving instead a screen empty and dark.  Now, he goes through the Startup Repair tool, where it says repairs to try with a blue bar moving, below which it says repair disk errors, it can take more than an hour to complete.  The problem is that he has done this for more than ten hours now with no sign of whether or not it works.  The screen shows exactly:

  Startup Repair is checknig your system for problems... If problems are found, Startup Repair will fix automatically.  Your computer may restart several times during this process.  No changes will happen to your personal files or information.  This may take several minutes.  Attempt to repair... Repair the disk errors.  It may take more than an hour to complete.

  Help, please! My laptop is only a year old and I backed up my files not recently (there are several important to me).  If he finishes by turn on normally? What is happening with it?

  Hi Ali,
   
  Do you remember the update (S) that caused the problem to occur?
  Remove all external devices (i, e printer, USB devices) and check.
   
  In the meantime, follow these steps and see if it resolves the problem.
   
  Step 1:
   
  If you have the Vista installation disc, I would suggest you start in the system recovery options and do a System Restore to the point that your computer was working normally.
   
  Step 2:
   
  Once your system is restored, manually install the Windows updates to determine which update caused the problem to occur.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]