Problem with rasterize pages in multi-page PDF intervals

Similar Questions

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve

  

• Need to know how to merge an interactive form with text page pdf

  I have an interactive pdf form, I need this merge with another page of pdf which is not a form. Kindly advice how can I do this using Adobe livecycle and acrobat pro X.

  Kind regards

  POOJA

  Hi Pooja,

  How is your form interactive PDF is created (LC Designer or Acrobat X). If you have used LC Designer, then you cannot merge the page, the only option is to create a new page in the designer, and then copy and paste the content.

  If you've used acrobat to create the form and then easily merge you PDF files to help combine functionality in Acrobat. (File > create > combine files)

  I hope this helps. I would like to know if you have any further questions.

  Kind regards

  ~ Dominique

• What is the problem with this page and IE?

  Gents,

  I have this page, exported from Excel to a HTML file, added some jQuery and Spry ToolTips and published it.

  It works very well with Firefox and Chrome, but IE trips on it. It simply display a blank page.

  Here is the link to the home page: Référence PPBM5

  With FF or Chrome test results page appears without a problem with IE, it's just a blank page. It's the page that causes these problems: http://ppbm5.com/Benchmark5.html

  Who am I to spoil that IE does not work? Any suggestion is welcome.

  Ready for the same problem of crazy...

  You have

  It worked.

  Gary

• 11g: problem with the page open in a new window

  Hello
  
  I have a simple application with two pages. Page 1 contains only one button:
  

          <af:commandButton text="commandButton 1" useWindow="true"
                    action="dialog:action"/>
  {code}
  
  Page 2 is empty. Action is defined in adfc-config.xml:
  
  {code:xml}
      <control-flow-case>
        <from-outcome>dialog:action</from-outcome>
        <to-activity-id>untitled2</to-activity-id>
      </control-flow-case>
  {code}
  
  When I click the button, page 2 opens in new window but page 1 stays kind of "locked". It takes two clicks on the button to get page 2 to show again (the first click sort of resets the page, and the second one works as it should).
  Same behavior reproduces in a very complex application (where, for instance, a table can be scrolled but selection is impossible). 
  
  This worked in technology preview, did something change and some extra step is required or this is a bug? I can send someone a test case, if needed.
  
  Thanks, 
  Pedja                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Pedja,

  I have confirmed that it is the glasspane.

  When you open a dialog box in a new window like this, the main window is supposed to be blocked interaction until the dialog box is closed properly (this technique is sometimes called a "glasspane").

  Just close the dialog window by closing the browser window does not mean "close" dialog box. You must use the AdfFacesContext API to close the window.

  Add a command button on your page 2, bind it to an Action listener that does this:

      AdfFacesContext.getCurrentInstance().returnFromDialog(null, null);
  

  The behavior you see is correct; That is why the af: popup is probably a more "preferred" method to do so.

  I just saw your answer on the PDF - you'll still need clear the sort dialog box so that it works. You can use a ' print' button instead of a button 'command' (thus eliminating the need to use the framework of the dialogue)? I could not find any method of compensation of the dialog without actually closing the window.

  John

• Problems with the page numbering

  Hello there ' All!

  I received a few questions about the numbering of the pages:

  1. When the notes are present, they appear over my page numbers (in the lower left corner), which makes them invisible. How to avoid this?
  2. How can I ignore numbering for some pages, as the cover page, table of contents etc. ?
  3. How can I connect page numbers in my table of contents to my actual page numbers?
     

  Thank you!

  1A, ill-conceived layout? Page numbers should ideally be placed on your master pages, and outside of the margins, you book to plain text (i.e., top, side, or underneath the purple square). Move the frames of page number outside the place of purple Director. If there is no room for this, you need to adjust your margins!

  2. you can 'ignore' the page numbers (they will keep existing), but you can hide them in several different ways. Easier - and more dirty - trick is to put a white rectangle on them (don't do this!). You can also (Cmd) Ctrl + Shift + click on any element on a master page, so "free him" and then just delete the entire frame, with the page number and everything (I wish you didn't do this...). The best way is to assign a new master page to only those pages; a specially created for this purpose (if you have other elements that should appear on all pages), or simply the "[None]" blank page.

  3 search 'referrals' help if you use CS4. You can also search for "Table of contents", it may be useful to regenerate all the content, so the text is up-to-date as well.

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Compatibility problem with 5.5 InDesign and QuarkXPress PDF (PDF producer: QuarXPress 8.16)?

  I have a problem with InDesign 5.5...

  1. A PDF created by QuarkXPress (PDF producer: QuarkXPress 8.16) was placed on a document, InDesign CS5.5 (7.5.2) (with other suit Adobe PDF program)
  2. After the export to PDF (using the print quality option), only the pdf QuarkXP was not correctly and some graphics and text transformed into 'lines '!
  3. If I come back and use InDesign CS 3.x, everythings out OK

  Just wonderring if anyone else having this problem?

  Ok.. Goy your file...

  When you export the file as PDF from Indesign,

  In the dialog "export to PDF": -.

  In the Compression options, (on the left)

  change "bicubic downsample ' to"do not downsample"for all, then check, it will be good to go.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Problems with opening files Acrobat Pro 9 PDF

  Hello. We use Acrobat Pro version 9.0.0 to convert our files of Word of documentation produced in PDF format. In recent weeks, our clients report a problem more with the opening of these files. We usually deliver those on a DVD with Acrobat Reader 5 or an older version. (Please do not ask me why we are always on these older versions!) Anyone done the experience of similar problems with Acrobat Pro 9 PDF files and older versions of Acrobat Reader? Acrobat Pro version 9.0.0 works without problems with the most recent Acrobat Reader 9.1 download?

  Please post your comments. Thx a lot - Kay

  You must save them to be backward compatible. You can only set your printer Adobe PDF option. In Acrobat, you do not save, but use reduce the size of file or PDF Optimizer for backward compatibility. You might have added something that was specific AA9 that causes the problem. Depends on if you create forms or what. When you are dealing with a company, it's probably a good idea to keep backward compatibility at least version 6, but it looks like 5 for your case if you distribute Reader 5 on the CD. I maintain AA5 compatibility of files that I create.

• Export a book to PDF - problem with common pages

  Hello

  I'm trying to export a book that has a lot of chapters.  Each chapter is a single file.  Each document starts with an odd page and ends with an even page.

  That the command is something like the image below.  Where there's for example page 4 4 & 5 common together.  Is it possible to print individual pages in PDF format?

  Thank you!

  Nano

  

  Looks like you are trying to export to interactive PDF format. By default, exporting spreads and you get what you see.

  You can either change to export to PDF format (Print) (lose the functionality of the button), or you can run a script to change the interactive export behavior. One place, you will find the script interactive PDF to InDesign CS5 is always a stretches on. InDesignSecrets

• Problem with the page turns with the OSM

  Just downloaded the version 23 of the content viewer. I consult my folio/articles on an ipad 1 and I still thorny issues when it comes to the page turns:

  1 if there is no MSO, page turns very well and is aligned with the previous or next as expected.

  2. to the ESM pages, if I do not commit to the OSM, it snaps to the next page or previous fine.

  3. If I click on the ASM then try to turn the page, he jitters and shakes and remain on the page or is blocked to halfway. When I try even once, it turns out as expected.

  I heard that by disabling the function of zoom in on PDF folios will solve the problem. If I don't create my own custom Viewer (I do not have a version company, just one question release them a) how can I make pages with active MSOs run properly?

  I typed double (or triple typed, I forgot) the title of the header on the Viewer to reveal that I use in effect v23. Also use lightbox version 23 in Folio properties. Also rebooted the ipad to make sure. Any help will be greatly appreciated.

  By the way, THANKS ADOBE! A lot of people complaining about things on this forum... But if it wasn't for what you did with DPS and InDesign, there is no way I or countless others could even dream of creating an application without having to pay a programmer hunderds if not thousands of dollars to the code! InDesign is one of the most elegant and most stable programs I've ever used. Add to that the ability to create applications tablet and it's just a force to be reckoned with! I < 3 Adobe and InDesign! Wow, that last sentence looks like it has been seized by a prepubescent girl. I am a man of 41 with 2 children just to be clear!

  You're right, it's the same question, as seen in the other thread. You can fix this by disabling PDF zoom when you build your application. When you go through the process to create your simple editing application, you should see "Show the Advanced Options" on the details page of the App in DPS App Builder. You can uncheck enable PDF zoom it.

  On behalf of the team, you are welcome. Thanks for the kind words

  Neil

• Problems with redirection page badly giving-OK in IE8

  I have 2 files to redirect visitors to a monthly photo page. http://ILS.org.au/PRD.htm and
  http://ils.org.au/prd.html.
  The two files are identical, but the htm file redirects to the photo page last month instead of the month page.
  He has worked for months and works fine on another computer with IE8. He also works on this computer with IE8.
  It seems that the htm file is stuck in the cache and is not charging.
  I use Firefox 6 with Windows XP

  Visitors will probably mostly be visitors first and notice not or be affected. But I think it's likely that you have changed this redirect page later and you are using the cached version before you can specify non-cache. To avoid these problems on your machine, I would like to clear the cache at the end of a session, and it's the only thing that I want to erase.

  Tools > Options > privacy

  • http://img232.imageshack.us/img232/4928/clearcachew.PNG

  You can clear your cache immediately (now) with

  Tools > Options > advanced > 'clear now '.

  Two source pages look the same as you have indicated, copy and paste the following text in the address bar. Maybe that is not updated was different there is little time.

  • View-source:http://ils.org.au/prd.htm
  • View-source:http://ils.org.au/prd.html

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  Displaying links watch that you do not include an end of sentence at the end. If a period is to confuse a link, I leave out the period or use a dash then to incorporate the following sentence or add more words in the sentence.

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.