Programs missing after backup

Similar Questions

• Satellite A200-1AX (PSAE6) NTLDR missing after backup retoring

  Hello my computer toshiba laptop A200-1AX (PSAE6) it came with Vista pre installed but I installed windows xp on it.
  Everything went well and I used acronis true image 11 home to perform a backup.

  Yesterday I tried to change my driver letter, and he told me that I can not change the letter.
  Then when I rebooted after awhile my windows would be stuck on the Welcome screen... then I tried to restore the backup with acronis bootable media... after the restore is completed and tried to boot, I have ntldr missing :(

  What has gone wrong? Can I register my cell phone from another format?

  Don t think that it would be able to solve this problem without reinstallation of the OS.

  Read some reviews on the missing NTLDR to error and one of the guys here in the forum found a solution to unlock the HARD drive and install XP:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  Check it!

  If this will not help the Toshiba Recovery CD is the last resort...

• Missing files after backup via elements 11

  Earlier, I installed Photoshop elements 11. Then I allowed the organizer of the program to run "backup" (?) of my trust photo in the Organizer. A very large file on my disktop who had files more small mutiple photos simply DISAPPEARED FROM MY OFFICE.     How can I now locate these files and restore everything on my desk?

  HELP >

  Where did you put the backup, for example the external hard drive, CD, DVD, etc?

• I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card

  How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
  I formatted my CF card already.

  < re-titled by host >

  If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.

  In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.

• My keyboard is missing after update screen.

  My keyboard is missing after update screen. It comes when I do the system restore, but disappears again when I turn on the computer and it will update again.

  11 updates have been installed. I couldn't find 10.

  Adobe Reader XI (11.0.10)
  Update for Microsoft Windows (KB3014406)
  Update of security for Microsoft Windows (KB3013126)
  Hotfix for Microsoft Windows (KB3009736)
  Update of security for Microsoft Windows (KB3008923)
  Update for Microsoft Windows (KB3014394)
  Update for Microsoft Windows (KB2952664)
  Update for Microsoft Windows (KB3006121)
  Update for Microsoft Windows (KB3006625)
  Update for Microsoft Windows (KB3013410)

  Notice that I get:

  

  

  How can I get the keyboard screen on back?

  Remove KB3004394 from Windows updates and reboot. It has caused many problems.
   
  Go to the updates of Windows. It should appear in the start menu. All programs, or you can find it in the control panel.
   
  Click view update history and installed updates. In the search bar type in KB3004394. When it shows the update, do a right click on it and uninstall it.
   
  Microsoft has released the update if you do not have to worry about coming back.
   
   

• SyntaxError: missing) after the list of arguments. Help!

  Hello im new to flash programming world and I need help I get this in the spot output when I choose 'Quick project' at the location of the project:

  SyntaxError: missing) after the list of arguments.

  I need to know what this means and how solve this problem, this is the code I was doing.

  package
  {
  import flash.display.MovieClip;

  SerializableAttribute public class Main extends MovieClip
  {
  public void Main()
  {
  trace ("Hello World");
  }
  }
  }

  as you can see, this is one from a "Hello World" program

  If you need more info just

  God bless you

  -Manboy777

  \m/ ROCK ON!

  1. click on file

  2. click on publication settings

  3. click on flash

  4. check "enable debugging".

  5 test

  6. copy error message

  7 paste the error message into the new message in this forum

• Anyone else having programs crash after installation of Sierra?

  I just installed Sierra on an iMac mid-2012. A lot of programs crash after installing Sierra, of Apple's native applications. Anyone else having similar problems? All possible solutions?

  Thank you

  Hi guitarno,

  Thanks for the upgrade of your iMac to macOS Sierra! I understand that your Mac works more slowly as it did before the upgrade. You can try to start up your Mac in Mode without failure.
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
  Check your startup disk and attempts to fix problems if necessary directory
  Loads needed kernel extensions only
  Prevents elements start and the login items open automatically
  Disables the user installed fonts
  Delete font caches, hiding the kernel and other files of the system cache
  Together, these changes can help resolve or isolate issues related to your startup disk.

  Try safe mode if your Mac does not end commissioning

  After successfully started upward in safe mode, check to see if you have any login or startup items. Here are the apps that run as soon as you turn on your Mac and continue to run in the background that can slow down the performance of your Mac.

  macOS Sierra: If you think you have incompatible connection points

  You can also check that your Mac has enough disk space for the smooth Sierra BONES. Under macOS Sierra, it's easier than ever to free disk space! Take a look at this link. Information System for Mac: optimization of the storage on your Mac

  Once these tasks are completed, restart your Mac normally and then test the performance. I'm sure you'll see a difference. Please use the Apple Support communities to post your question.

  Good day.

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• My URL/address bar is missing, after the delicious update. My search engine is missing after the delicious update. I can't figure out how to reactivate them. rhouwan@***.***, thank you.

  My URL/address bar is missing, after the delicious update.
  My drop-down search engine list is missing after the delicious update.
  I can't understand how turn them back on, please advise, thanks.

  You are welcome

• Pavilion dv6: pilots missing after upgrade to windows 10

  The following drivers are missing after the upgrade to windows 10:

  Hello:

  For the first 3...

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp45046.exe

  For the last one (0004), you need this driver...

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

• Program hangs after 25 events

  I'm running on an issue where my program crashes after 25 events were recorded from a cluster. I created a cluster 32 Boolean controls, and when a control is pressed it triggers an event in my structure of the event. It doesn't matter which of the 32 controls I click, after exactly 25 button presses, that the program crashes. Does anyone have ideas, which could be the cause?

  It would really help if you could do a simplified demonstration.

  In the zone configuration of the event, is there something interesting (front of the lock, limit maximum instances, etc.)

  You set a maximum queue size?

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• My desktop icons and toolbar and start programs disappeered after getting a virus.

  My desktop icons and toolbar and start programs disappeered after getting a virus.

  I deleted the virus.

  No idea how to get back them?

  Hi Matt,
  Some infections of virus/malware will hide all files and shortcuts on your computer. To make your files visible again, download display on your desktop.
   
  Once downloaded, double-click display and let it run. It removes the attribute hidden on all files and attempt to restore items in quick launch and Start Menu to their location.
  If you think that your computer is still infected, try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide

  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.

  Brian

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.