Similar Questions

• Problems with the disk drive - DVD playback

  I have a Windows Vista Ultimate 64 bit PC with a Samsung SH - S223C DVD, player, which both are a little less than two years. Recently, I started having problems mainly watching DVD and also some problems of installation of video games. When you watch DVDs in Windows Media Center or Media Player, the player is very slow to load the disc, even sometimes not at all. When it's load and play the video may freeze a lot while the drive and fast shipping and rewinding are a nightmare, that nothing is really happening, the picture just freezes. Boredom, it's a day DVD can be read without problems, but the next I meet the above problems. I tried to buy a DVD-ROM of Hama Laser Lens Cleaner disc, which did not solve the problem, it has made no difference.

  I encounter any problems when you watch a video recorded on Media Center, I am the owner of a TV Tuner and all saved games video very well without any problems. Also, I live in England so my hard drive is region 2.
  I have no idea how to fix this, it is very annoying. I'd appreciate any help that anyone can give me.

  Thank you.

  Hello Dan

  You can contact Samsung on the drive and see if there is an update of the firmware. If this isn't the case, you can replace the drive because it sounds like the drive itself is a failure.

• I am facing problem with playback of the audio recorded.

  Original title: sound recording problem

  Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.

  It is uniform everytime I try. What I am doing wrong?

  Rich

  [Moved from comments]

  Hello

  What version of the Windows operating system is installed on your computer?

  If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Hope the information is useful.

• HP envy ultrabook 6-1070el problem with audio and HDD

  Hello

  I have a problem with my wanting to ultrabook 6-1070el running windows 8; I noticed that when food is attached, and the hard drive is written, speakers make a strange noise when I listen to something.

  This happens when the power is off, probably because the hard drive stops writing.

  Does anyone have an idea how I can solve this problem?

  Thanks in advance for the help,

  Alessandro

  allecaso2 wrote:

  Yes, I tried to move the power brick more away from the computer and the power supply is plugged into an outlet that is properly grounded, but the problem persists.

  However I thought to replace my hard drive with an ssd, so will increase the performance of the pc, and probably I'll solve the problem! Is the size of my hard drive 2.5 "inches, right?

  Hello again!

  There honestly not a lot to offer about the buzzing, other than what I proposed.  You are in warranty?  If so, you should let HP Support deal with the issue by giving them a call.  The number is 1-800-474-6836 if you are in the USA / Canada.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  I believe that almost all laptop hard drives are 2.5 "then Yes.  Make sure you update your BIOS (here's a link) before installing the SSD.  Also, take a look at this document.  It is the Guide Service and Maintenance of your laptop.  It will help you to disassemble the laptop.

  Have a great day.  Let me know if you have any other questions!

• Problem with playing video games, DVD and CD audio with windows Vista.

  I had a problem to read these types of discs with my hard drive. It does not recognize that there is a disc at all. This ONLY happens with new discs I get, for example by trying to install a new video game or download a new album that I just got. If I want to play a previously installed game I put game disk in and it works perfectly fine. This only happens with new games that I have not yet installed. E.g. I want to play starcraft, previously installed. I put the cd in starcraft and the game appears as usual. But if I want to install starcraft II nothing happens when I put StarCraft II in the disk drive, even if I go to my computer and double click on your drive, it just opens the CD door and asks to put a disc in when we're already here.

  I tried MR. Fix and it recognizes that there is a problem but is unable to repair. I tried to uninstall the disk driver and not the fixed not restart, but who either.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  A CD/DVD cleaner might help.

  -----------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem with adblocker working on reboot & recording is not some prefs.

  First issue: Adblocker works fine when first installed. Then if FF is closed and reopened it SAYS it is enabled, but it does nothing. I have to go to the addon menu to disable and enable it to make it work again, when it works fine. It's really annoying, having to do that. Some comes with FF not anti-ad.

  Second: FF won't save preferences involving a "do not show this message again" ticking box, i.e. with the closure of several tabs, browsers private, etc. All other prefs to record properly. And Yes, I read the FF won't save prefs section and tried all this; l it does not work.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Problem with the microphone, I can record voices, but nobody hears me

  While talking with my iphone, the person on the other line is not able to hear my voice well, but I can hear them perfectly, this problem occurs when I talk with my sim card while talking with FaceTime or WhatsApp or speaking with Siri I can hear and speak without problems, and also there is no problem in voice recording. And also it is no problem if I respond with my MacBook.

  I was wondering what could be the problem!

  P.S:I also tried to call with EarPods and it did not work, and reset network setting did not work!

  You have 3 microphones in your phone, all assigned to different applications. It is likely that your main microphone (at the bottom of the phone) is defective or has dirt stuck in port.

  Are you able to record a voice memo?

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with playback of the DVD.

  I created a DVD project in again, nothing fancy, just a video track with a menu and a submenu.  When you preview, everything works great.  Burning ends without any problem, but the DVD is choppy and stop messing about 75 minutes.  I tried several burns and tested the DVDs to several players.  Everyone has the same problem at the same point.  I did a lot of projects very similar to this one and never had a problem.  Any ideas?

  I had this happen to me a few years - it's the DVD burner. Try an other burner - just a thought.

• problem with the playback of the record to Captivate (sensitive design mode) 8 screen

  I use 8 Captivate sensitive design.  I did some screen recordings (in demonstration, training and assessment methods) and that whenever there is a short video clip (for example by dragging a bar window or a cursor on the screen), it plays fine in design mode, but then when I publish the entire project for the preview, the clips are suppressed.  It seems that these clips are integrated into my slides Fund and are in SWF format.

  I wonder if they do not play properly is because I publish to HTML5.  If so, how can I convert these small clips SWF to something else?  And if not, what else could be wrong?

  My solution is to replace these slides FMR (having a camera on the film) which sometimes cause issues when publishing to HTML5, cpvc slides, if I can't avoid them. Very often, you can avoid dragging the mouse: example is to click on the scroll somewhere bar instead of drag in the scroll bar, to use the hotkeys etc. When you can't escape a "video shift' stop recording, use the big slides, video demonstration or Insertion button, slide CPVC and you will get video demo mode, where you can record video (its editor-in-Chief is much more powerful than the limited functionality of FMR-edition). When you are finished with the cpvc-slide, you can continue capturing software with slides, software simulation (he is lacking in the Insert menu for some unknown reason). It's more work, I know, but will play in HTML5 (these slides are converted to MP4), its quality is much better than FMR and you have video editor if necessary.

• Commit_form creating problem with shutter release once - new - Record - Instance

  Hello friends,

  I use Oracle forms 6i. I have a block of multiple data. I wrote commit_form in a times-news-record-instance of the data block. When I run the form on my instance the form does not open.

  But when I comment on this code, the form opens to the instance. What could be the problem?

  Also is it a condition that I can specify if the block of the data set is null when I open the form?

  Hello...

  In When-new-folder-Instance, check if the lock status is NEW. If not, then just apply COMMIT_FORM;

  Try this code in your trigger

  IF: SYSTEM. BLOCK_STATUS = 'CHANGE '.

  THEN

  COMMIT_FORM;

  END IF;

  Should work for you.

  Thank you...

• Satellite 1110-Z15: problem with Recovery CD and DVD player

  I currently have a Satellite 1110 model number PS111E-006R8-EN/S1110-Z15.
  But a few weeks ago, my DVD Rom drive no longer works, it would not run properly when a cd is inserted it kind of Jolt and then arrested and continues to do the same. Anyway to cut a long story short, I tried to rebuild the system by using a version of windows xp that has been successful, it is now, I found the original recovery disks, but without using the cd drive inward, I had recourse to an external cd drive freecom, I hold the c key at startup , but nothing happens, can anyone help emergency
  PS: I made the changes in the Bios to boot from the cd drive

  Hi nichollsr,

  in our society, we have 2 Satellite 1110-Z15, and there is a delicate hint for recovery.

  Toshiba has made a small mistake and printed the wrong order on the CD. You only need to change the order of the Recovery CD. No.. 1 is no. 2 and vice versa.

  Insert the diskette n ° 2, hold down the 'C' key and the recovery is expected to begin. If your laptop does not identify external drive-Freecom CD try to hold the 'U' key to boot from USB.

  I found a FAQ on the site of Toshiba UK

  http://UK.computers.Toshiba-Europe.com

  You must click on Support / download, then to the knowledge base and search for a called FAQ

  'TIU0000002559 '.

  There is a detailed explanation of this issue.

  Goodbye, TOK

  PS: Do not forget to reward points, I'm a Pointcatcher!

• problems with the formatting of dvd discs

  I'm unable to make DVDs and get the error saying windows formatting was not successful.have family vista premium 2G ram toshiba 15 "what I can do to check on my DVD was using discs DVD + r. should I try r? any help would be appreciated.jeff

  I would be useful to know the exact steps using your software (1) to burn DVDs, (2) exact message displayed on the screen.

  Saw the failed drives the "writing to the DVD" treats to 89% +/-, then display the error "failed to complete. Now that sounds weird, but try a CD + R in the machine. When purchased, you know that the DVD laser is grilled, there are has 2 separate lasers.

• Problems with the Protection of DVD - RW write to new blank DVDs, I just bought!

  I use AVS Video Editor to make a wedding video, but when I try to burn on a DVD - RW blank (from a lot of regular Maxell DVD - RW I bought from Argos) she kept saying "the disk is write protected", and it won't let me do anything. Even when I went and formatted DVD - RW on my wife's cell phone, mine still wouldn't recognize it. What should I do?

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/mats#tab2
  --
  ..
  --
  "ajh17" wrote in message news: 3d0fcfa9-f367-423a-b7b6-7f2e8a3a0173...
  > I use AVS Video Editor to make a wedding video, but when I try to burn
  > it on a Virgin DVD - RW (in the lot of ordinary Maxell DVD - RW, I just
  (> bought from Argos) kept saying "the disk is write protected" and it
  > don't let me do anything. Even when I went and formatted DVD - RW on my
  > mobile wife, mine still does not recognize it. What should I do?
  >
   
   

• Problem with custom validation error message record

  Hi, so I'm having a problem of application an error message customized a validator backup.   I ran the following SQL scripts and updated the XML file as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")
  "ClassificationRequired", "ReflectiveRequiredValidator", "Validation rules")

  
  INSERT INTO commonXLAExtensionCacheItem VALUES ('1059666651E8-A7F7-447-8CF5-8EE1F467C20Q',
  "1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ', 0, 'RequiredPropertyMessage ',.
  ' Specification must have a ranking

  < rule type '6501' = >

  < event condition 'save' = >

  < if type = "ReflectiveRequiredValidator" report = "true" required = "true" property = "ProductAttributes.Classifications" msgcache = "ClassificationRequired" / > "

  < / condition >

  < / rule >

  I get an error message:

  Server error in ' / gsm' Application.

  ---

  Object reference not set to an instance of an object.

  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.
  
  Exception details: System.NullReferenceException: Object Reference not set to an instance of an object.
  
  Source of error:
  

  You have the stack trace in the error message? Assuming it's the cache:

  Give a try instead and see if that solves it.

  Delete the original entry and change the name and the inheritfrom of the ValidationMessages/ReflectiveRequiredValidator message cache, as follows:

  INSERT INTO commonXLAExtensionCache VALUES (' 1058811679F0-6F46-48FC - 9A 15 - 271EC9A7D0FQ ")

  "ValidationMessages/ReflectiveRequiredValidator", "ValidationMessages/ReflectiveRequiredValidator", "Validation rules")