Windows xp lost the theme settings when you restart or cold start

Similar Questions

• Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

  Original title: windows 7 Home premium product...

  I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

  Use your Windows 7 Home Premium product key to activate it.

  Windows 7 is pre-installed on my computer, How can I find the product key?

  The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

  

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

  Activate your Windows 10 license with Microsoft Chat support

• Qosmio F60 - change the screen settings when you use the DVD player

  When I try to play a DVD using the DVD BD player a message that tell me to change the setting of the screen I followed their instruction to no availo. I am running Windows 7. The DVD plays on windows ok support.

  Any help would be appreciated

  Hi ametec.

  This DVD BD drive has been preinstalled on your computer?
  Which message get you exactly? Maybe you can download a copy of screen or something else

  In my opinion this problem is only related to this because the Media Player DVD player everything works
  For example, I use VLC media player for all my audio and video files. It s a small freeware player that can play most audio and video files. In addition it s not necessary to use a special DVD playback software.

• compensation to the previous settings when you use the adjustment brush

  I want to add sharpening to the eyes on a photo, so I take the adjustment brush, although there are a lot of settings across the panels that have parameters. I try to click again to make a new brush through the previous settings are still there and if I start painting it is also change of exposure, etc.. What is the best way to reset all the previous settings without changing anything in my image? In other words, I don't want to erase any setting that I've already applied to the image at the new adjustment brush.

  Thanks for any info.

  As soon as you click on new, just double-click on the word effect upward the adjustment panel brush. Which resets everything in the adjustment brush. But since you have chosen again, it will have no effect on your previous brush.

• using 30 firefox in windows 7, I get a blank when you restart, if I don't have that one tab open when I close it.

  I have my options set for firefox "open windows and tabs from last time", but whenever I don't have that one tab left open, I get a blank page. If I have several tabs, then it opens with the tab and windows.
  I am running Windows 7 Professional and Firefox 30. Thanks for any help you can offer.

  Quote: it's only when I have no tabs open I get the blank page (instead of the homepage).

  There is always at least one open tab, if it didn't is no extensions installed that hide the bar tab in this case.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Windows 7 displays the error message when you exit + cursor problem

  Two issues here. Phoshop CS5 on Wind 7 64-bit.

  Number of physical processors: 8
  Processor speed: 3073 MHz
  Built-in memory: 12279 MB
  Free memory: 9577 MB
  Memory available to Photoshop: 10934 MB
  Memory used by Photoshop: 80%
  Tile image size: 128K

  First issue is since the last update automatic Adobe (why fix what is not broken?) Whenever I go out now Photoshop I get the message "Server QT Adobe has stoped working" and sometimes when I go out the bridge. InDesign behaves as evil. I can no longer start a previous document in the file without ID Manager crashing on.

  The other is the sliders in the Clone and delete lose their advantage (become invisable) without any reason - well not quite. Noise Ninja crashed in Photoshop when I tried to use it. I reinstalled it and all is well. The issue of cursor seems to be intermittent but came back (for no reason), after that I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem now seriously affect how I work. Almost any return to Win XP, who ran perfectly in Photoshop CS5.

  Any help will be accepted with gratitude.

  Doug

  Cursor problems are known to be caused by outdated video drivers (nVidia).

  Assuming you have a nVidia (which model?) video card, go to their web site and download and install the latest video drivers for your card.

  Also, this could very well solve your crash.

  Don't forget the video drivers to apply the OpenGL system, on which Photoshop relies heavily.

  -Christmas

• Satellite Pro A100 PSAAPE: WLan signal off the power switches when you restart

  I have a pro satellite a 100 psaape.
  Whenever I reboot the signal turns off wireless.
  I have to manually enable the wireless switch to get a signal to go online.

  Is this normal or is at - it a way to get this automated so that it is always on.

  Hello

  This is normal since the needs of subssystem wireless initialized manually by the user. But I think it should probably be an option to automate the it.
  I would like to check it out and give some feedback. On the other side, you should look for some options like 'turn on wireless to start windows' and so on...

  Welcome them

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

• Error when you try to start the Medal of Honor Allied Assault: a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Medal of honor allied assault has stopped working?

  This message seems to me when I start the Medal of honor Allied:

  (a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)

  Hello

  ·         How long have you been experiencing this problem?

  You can reduce hardware acceleration and check if the problem persists:

  1. right click on the desktop and choose personalize.

  2. click on display settings.

  3. in the display settings window, click on advanced settings.

  4. display the Troubleshooting tab.

  5. click on change settings.

  6 reduce hardware acceleration.

  Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems

  Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135

  NOTE: make sure that you start the computer in normal mode after troubleshooting is done

  You can also post your questions on: http://support.ea.com/

• Cannot add the find now is in the Tools menu when you try to install add to import Windows Live messages, contacts, etc.

  I want to import Windows Live 2011 messages, contacts, etc and tried to install the recommended add on. I downloaded and registered the add on by following the instructions, but when I went on the Tools menu, to add on the of are not there to complete the installation.

  Add what ons reports tools when you use the menu bar. Shortcuts universal to display hidden menu bars is alt or F10

  It looks like you use the button AppMenu (3 horizontal lines).
  I guess that you haven't noticed the Add-ons selection in the main menu when you have clicked on that.

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.