Problem with recovery of tables...

Similar Questions

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• satellite 2410: problem with recovery CD

  I had problems with laptop computer virus and decided to use the recovery cd

  At the end of installation, I get the message extraction failed and that there are currently no operating system on the laptop.

  How can I fix this problem?

  Hello

  check the BIOS settings? Turn on the laptop and immediately press the ESC key, load default settings and change the CONFIGURATION of the DEVICE to 'Installation of the OS' and try again!

  Second step: is your CD ok? Is there anywhere a scratch?

  Hans Bye

• Problem with recovery dvd - Win 7

  Hello

  After you perform a clean installation of Windows 10 I had problem with closing down my pc, it's a bug to win 10. So I decided to reinstall Windows 7 on my Acer Aspire M3920 of my recovery DVD made by Acer eRecovery management.

  The problem is, Setup stops and the #1 restore disc pops out after that the files were loaded from disk and is ready to begin the installation.

  This is the message: "there isn't enough free disk space on the drive for the files needed to continue the operation.

  PS: Before installing Windows 10, I deleted all the files and partitions on the hard drive. Maybe it's the origin of the problem?

  Someone who can help me?

  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD drive and choose completely erase your HARD drive (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
  Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

• Help for BBM blackBerry Smartphones & Facebook does not not for 9320 - problem with "host Routing Table? -Virgin

  So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...

  At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...

  I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...

  After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...

  24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?

  Any help?

  Or

  Anyone with a new BB knows something like that recently? Thank you

  Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.

  Good luck!

• Problems with slot-shaped table and set the values of column

  Hello
  
  I have a problem with a tabular presentation.
  
  I have two tables
  
  P_detail and table v_master
  
  columns of v_master:
  v_id
  v_Name
  v_info
  
  columns of p_detail:
  P_ID
  p_master_fk
  p_name
  p_info
  
  I want to have a tabular presentation where I can store permanent data retail values. That's why I want to keep the default main column join the detail columns.
  In SQL, I can do this with an outer join:
  
  SELECT m.v_name, d.p_master_fk, d.p_name, d.p_info
  OF v_master, p_detail
  WHERE v_id = p_master_fk (+)
  
  I get the lines that exist for the master data and can add values for the columns of detail. I removed the "add lines" because that makes no sense, because the amount lines are already offered at the opening of the tabular presentation.
  
  Now, I want to get/save the v_id (main table) in the p_master_fk column value
  
  How can I do this?
  
  Thank you and best regards,
  Matthias

  Hello

  One approach is to use a database instead trigger. If you define a database view using the query:

  SELECT m.v_id, m.v_name, d.p_id, d.p_master_fk, d.p_name, d.p_info
  OF v_master m, p_detail d
  WHERE v_id = p_master_fk (+)

  Then, create a trigger on the view that will insert in the detail table if d.p_id is null and update the secondary table if d.p_id is not null instead.

  The Apex tabular form is then based on the view (with identifiers like hidden columns) and all treatments multirow Apex should work without modification.

  Rod West

• Problem with a light Table in Bridge CS6

  Hello! After a re - install (which does not solve the problem with PS), now, I find that, when you use the light table in Bridge CS6, and after hitting the SPACEBAR, if I then click on the image, it goes to the size of 800%! Before the uninstall and reinstall, it has perfectly worked by taking images at 100% size.

  I hope someone can help...

  Thanks, farming
  

  Why you reinstall photoshop cs6?

  What operating system do you use?

  You reinstall all updates Photoshop cs6 by going to help > updates within photoshop cs6?

  After you enter the light table, use your mouse wheel to zoom to 100% and leave the light table.

  The next time you go to the lightbox and click on the photo, it should only go to 100%.

• Oracle 10g - problem with "DELETE from TABLE WHERE ID in (1,2,3)" (use cfqueryparam)

  Hello, everyone.

  I have problems with executing a DELETE statement on an Oracle 10 g server.

  DELETE 
  FROM tableA
  WHERE ID in (1,2,3)
  

  If there is only a single ID for the IN clause, it works.  But if more than one ID is provided, I get an error message "SQL command" not correctly completed.  Here's the query as CF:

  DELETE 
  FROM TRAINING
  WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
       AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
  

  Someone at - it works with Oracle that can help me with this?  I'm a developer experienced in MS - SQL; Oracle is new to me.

  Thank you

  ^_^

  So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.

• DV 6-6170 ee problem with recovery partition

  my restore partition does not work when I try to start by F11 shows a partition allocation failed message, I did an extra partiton tool so when the problem of recovery occurred I removed this partition and when I tried to set the partition as active I can't rely on it because it is disabled.

  in the window manager, that it shows that I have 4 partitions C, system recovery, Hp tools is true and how do I reactivate my recovery to work properly, please advice me.

  After you apply the changes - restart the laptop at least once. Then, stop and restart after 1 minute - press F11 to check if the recovery work.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• NB520-108 problems with recovery

  Hello

  Be careful on my English. I'm from the Germany.

  Earlier, I have deleted all data on C: to install a different operating system. Data D:\ I left intact to reset the system later.

  But now I can not get back the original with this http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm guide system

  When I start with "F8" and "repair your computer" I don't have "Toshiba HDD Recovery" in the Options list.

  How can I reset my system now to the factory setting?

  Thanks for the tip.

  Best regards
  Michael

  Michael, I assume you didn't not create recovery USB support, right?
  What you have done, it was not the right way. Problem is you don t have access to the recovery image. You can install recovery image using recovery media only.

  Anyway, I have the same machine and I installed the own version of Win7 Home Premium and it is much better than the original Win7 starter.

• Problem with recovery partition

  I have HP DV6 6051ea laptop, my problem is when I try to recover my OS (win7 Home Premium) provided that the factory by the recovery partition, it says use created recovery disc. I created them but I really ned to use the partiton to recover OS not Disk.Please help me solve the problem.

  Sorry, I don't have your answer. If you have the recovery partition INTEC and no manor goes to MBR (not yet cleaned), NICU f11 is the option.

  If the f11 also doesn't work, I have a work around but there is no bail if it can work in all cases.

  Use winpe using USB or CD (you can download for free the winpe image of all the online sites such as BartPE. and create disc/USB using image writer). Now start your PC with this application image and launch ghost32 (most of the images online has already, if not download ghost32 utility to use and copy it to USB).

  Once the Ghost is running, disk/partition image. give the location of the source ofrecovery partition) and the partition of the destination in the drive c. which will extract the image of C:

  Good luck!!!

• Problem with recovery Partition(After i got a Virus)

  Hi all

  I use HP Envy 15 laptop with windows 7 Home premium x 64 bit installed. I don't create the recovery discs since I've had this laptop and what happened is that I had a virus on the internet but I have fixed almost all the defects of the system caused by the latter, but the main problem for me, is that it changes all the Player main file name in Virus1232 for example (d:\recovery converted d:\virus1234) and I spent hours on the internet for the names of folders and files right and I got them all but only a single file, not sure. My problem is when I enter the Recovery Manager it detects none my recovery partition (but the virus is not responsible for any deletion of file it just caused some change system) and just to talk I've also corrected the names of folders and files in the c: drive, since they are necessary also.

  

  What are the names of files I got in the D: drive: bootmgr - BT_HP.flg - CSP. DAT - DeployRp.log - HPSF_Rep.txt - language.ini. and let him file name is the one im not sure of: "HP_WSD.dat" (it's a file of size zero).

  The recoverymgrdump.txt just works & "leaving CSBRMgr::GetRPTOOLPartIndex!
  then he said to me:

  "Win32 System Info Code = 3, Message Info = the system does not have the specified path."

  and he also said:

  "CSBRMgr::HpcdFlgIsExistInUP : \WINDOWS\hpdrcu.prc does not exist."

  I don't know if this is normal, but also the deployrp.log gives me this error:

  "The package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab.

  of course there are errors more in both files, but I guess that those who are the most important.

  
  

  So my question is: the attributes of file in the d: drive would be responsible for this error (I changed all the attributes to be hidden and read-only system)

  OR

  If anyone has a solution please tell me what to do.

  Thank you.

  
  

  You are the best to order that a set of recovery disks from HP, doi a full restore using those.

  You can order here recovery media

  http://support.HP.com/us-en/document/c00810334

  .

  Or call HP on the phone to order a set.

  U.S..
  http://welcome.HP.com/country/us/en/contact_us.html

  Everywhere else
  http://welcome.HP.com/country/us/en/wwcontact_us.html

• The urge to Ultrabook 6 problem with recovery after failure of hard drive (out of warranty)

  Hello

  Please can someone tell me if it is true that to use HP factory recovery disks, hardware must be exactly the same as when purchased.

  After hours wasted trying to get the recovery disks to work, I find myself with the same "failed to retrieve @ screen and some unnecessary lines of code."

  In reading the various posts, it seems that I have a replacement for HP HARD drive of the same type that came with the computer. If this is the case, then the links on the support pages should say this before I have pay £39 for a set of disks.

  For me, a hard drive is a hard drive. I replaced a drive fried (1 month out of warranty expires) with a good brand replacement, but larger. Disks won't load.

  However, I could load W7 form an iso file and get that to work. I need the recovery because I do not know how to configure raid which allows the QuickStart on this laptop, and I don't have the time or no further inclination to make it work.

  Partly a rant, sorry, but I'm wrong, and is there a solution?

  Concerning

  I have seen others with this problem. Unfortunately, the only working solution, I remember the top was where a guy removed the player cache Msata, ran recovery then reinstalled.

  On a single charge of Win 7 I think you could install the Intel Quick Start software, then use it to activate the quick start. I have more a laptop Win 7 with Msata to test, but I remember the software could be opened from the icon beside the system clock and used to toggle the quick start.