problem with remote façade panels
Hello
I followed this tutorial
http://digital.NI.com/public.nsf/allkb/7F95D43D3F50FCAC8625710E000068E1
with a vi of examples
Everything seems correct, but when I connect to the application built with the browser, it get stuck with 0% load (see figure lissajous.png). Do a reload of the page I have crash plugin container (Fig. lissajous2.png). I get the same problem with exproler and firefox.
The stand alone application rus fine (lissajous1.png)
Sorry I made a mistake in the previous comment.
I add the other digits.
I don't know if this line in the err.log file is normal:
default: 3 pool.0 LVRFPHandler return dummy file
This means that the server sends a dummy file instead of the right?
Sincerely
Juan
PS: extract log file
GET /.LV_FrontPanelProtocol.rpvi110 HTTP/1.1
pool.0 request: 3 24236: default: is the service host
default: 3 pool.0 in LVAuthHandler::cloneHandler()
default: 3 pool.0 in LVAuthHandler::LVAuthHandler()
default: 3 pool.0 LVAuthHandler always match requests
default: 3 pool.0 in LVRFPHandler::cloneHandler()
default: 3 pool.0 in LVRFPHandler::LVRFPHandler()
default: 3 pool.0 in LVRFPHandler Setup()
default: 3 pool.0 LVRFPHandler handling request
default: 3 pool.0 LVRFPHandler return dummy file
pool.0 request: 3 24236: answer: >
HTTP/1.1 200 OK ^ M
Date: Thu, 11 Sep 2014 12:14:11 GMT ^ M
Server: Mbedthis-Appweb/11.5.0^M
Content-type: application/x-labviewrpvi110 ^ M
Content-length: 12 ^ M
Connection: keep-alive ^ M
Keep-Alive: timeout = 60000, max = 99 ^ M
^ M
default: 3 pool.0 in LVAuthHandler::~LVAuthHandler()
default: 3 pool.0 in LVRFPHandler::~LVRFPHandler()
pool.0 request: 3 24236: finishMaRequest: persistent attempt
httpServer:3 pool.0 new IPADDRESS connection for: 8000
pool.0 request: 3 24244: application of IPADDRESS:50980 to: 8000
pool.0 request: 3 24244: parseFirstLine:
Tags: NI Software
Similar Questions
-
Problem with remote façade on parallels panels
I'm using LabVIEW for windows using parallels on my mac. Whenever I'm doing a website with the address of the Web site remote façade panels eventually satrtiing with 10.211.55.3, which is the parallels network IP address. For example, the created Web site URL was http://10.211.55.3:8000 / add.html. If I use LabVIEW using bootcamp on my mac I get a valid URL from the IP address of the computer. I can access this site from a different computer and control my VI successfully.
So my question is... does anyone know a way I can use LabVIEW using parallels on my mac and a valid site using remote façade panels.
Thank you for your response. After trying a lot of things I thought about her. You can go for parallels 'settings', go to 'material' then 'network '. Where it says "source" changes to "Wi - Fi".
-
Server does not support remote façade panels
Hello. Hope someone has an idea about that. After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel. Before the update it worked normally.
I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.
I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.
"I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.
If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed? I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server. I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.
Thank you
Michael
Another possible solution to this problem - operator error.
See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to. Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project. And they cannot use the same port; This will also lead to the error "server does not support the remote panels.
Note to the NOR - you must add this to your KB document on the resolution of this error.
Thank you!
-
Problem with remote access in a residential group
Having a problem with desktop sharing remote within a group of home access. I don't have problem of access to the desktop from the laptop, but for some reason I can't access the laptop from the desktop. I tried everything I could think of. Remote access is enabled on both PCs. Help, please. Thank you very much!
Hello
1. who is the operating system installed on the desktop and laptop computers?
2. what happens when you try to access the laptop from the desktop? You receive an error message?
3. What are troubleshooting you performed?
I suggest you follow these methods and check.
In a first step of troubleshooting, I suggest to run the troubleshooter to group on the source and the destination computer.
Step 1: Open the troubleshooter group living
If your computer has problems viewing computers or files shared in your collective housing, try to use the collective dwelling Troubleshooter to fix the problem
http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter
Step 2: Share files and folders on a group of houses in the laptop using the method proposed below. Try to access from desktop and check.
a. right click on the item you want to share, and then click share with.
b. Select Home Group (read/write)
c. this option share point with your entire Home Group and allows them to open, edit, or delete.
Share files with someone: http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
See also:
Home Group: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questionsI hope this helps!
-
I have a problem with remote desktop,
Original title: Remote Desktop
has worked before, since the evolution of the modem, it does not work
Hello
In addition, I would have you post here as well.
Back to us for problems with Windows.
-
Problem with remote desktop access
Hi, using windows xp service Pack 3. and when I try to connect with the help of remote desktop citrix.it shows error like "the service user profile Service does not log. User profile cannot be loaded. "and sometimes as"the Group Policy Client service does not log. access is denied. " can any body help on this problem? .
I tried to solve the problem by deleting the existing user profile and create again new profile, but the issue is not resolved.
Can I get any solution for this?
my pc configuration is:
Windows xp, service Pack 3.
Thanks in advance
Hello pcsekhar,
For this specific issue, please post to the address provided below.
Remote Desktop services
http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
-
Connection problems with remote desktop connection
Good somehow I try to connect to my remote friends computer and it has a windows 7 and I already configured on his computer. I already forwarded Ports on his computer, his static IP, added exception to the firewall, including Norton Internet Security Firewall 2013, so his remote desktop connection is good. But my computer is a Windows Vista Home Premium, but somehow, it wont let me connect it keeps telling in a dialog box with this error:
Say this 'Remote Desktop disconnected"
"Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.But it's is not my friends computer problem, its my computer, I would have never been able to use Remote Desktop on my computer, I have no idea why. I also configured with my router Embarq EQ 660 - R in the NAT rule SUA Port 3389 with my routers IP. But somewhere in my firewall, it doesn't let me use the same TCP 3389 port, it won't let me enter any number of his strange. Well, I have the screen shot a photo so I'll attach the image so you can see what I mean. But I already have my friends computer sent a static router IP configured on him and on his router port everything worked fine, but the problem is mine, don't let me not the port before my router only if I use the NAT option and entering into the rule of SUA, in which I made with port 3389 , and my default gateway static IP. I also added an exception to my Windows Firewall and also my Norton Internet Security firewall, 2013 including the application, but still somehow, it does not work. On my router, if I try to put the port range: 3389 to 3389. Added the name of Service like RDP, Type of Service: TCP. Also, I made my public computer static IP a little go. A how's my friends computer it works
Thanks I would really appreciate it
Hello Cristian,
I understand that you can not connect to connect to the computer Windows Vista Home premium to Windows 7 computer using remote desktop.
I wish to inform you that you can not use Remote Desktop connection to connect to the remote computer (host) running the following editions of Windows Vista:
· Windows Vista Starter
· Windows Vista Home Basic
· Windows Vista Home Basic N
· Windows Vista Edition Home Premium
You can also view the below article for more information.
Remote Desktop connection: frequently asked questions
Connect to another computer using Remote Desktop connection
I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.
-
problem with remote access to NMH405
Hello
I have the NMH405 connected to my PC (windows7 and windows xp with IE and Firefox). I was able to connect to the platform of media locally and also via a remote access through ciscomediahub.com. However, remote access Island suddenly no longer works. There is an error message saying that the device is in offline mode.
I tried to unplug and turn off the mediahub that did not work. I have also resorted to reset the mediahub that did not help also. Even now when I access it locally, I can't even connect via the browser to configure the media center.
I would be grateful if someone could give advice on how to solve this problem.
Thank you!
just to close the loop on this. I called Cisco and their identified technical support it was a hardware problem. Since then, I exchanged for a new device. It works fine now.
Thank you very much!
-
Problem with Remote Desktop using router WRT54GC
Hi all.
My husband and I travel with a computer and an iPhone each, so 4 wireless devices, when we travel, we use the WRT54GC to connect to DSL or broadband from the hotel and then create a LAN in the room using the WRT54GC so we can connect all our devices through the router to the internet.
Key steps are:
(1) connect to the router from the hotel to rent a computers IP address.
(2) do an ipconfig to get the IP address leased the hotel, over the subnet, DNS servers, etc.
(3) hook a computer into the WRT54GC and give him the IP address and other parameters and clone the IP address of the original computer used to connect to the hotel so that the hotel think that our WRT54GC is the same device.
(4) connect the router to the wall to talk to the router of the hotel and to connect our devices on wifi LAN created by the WRT54GC and we're good to go.
Everything works very well and always, but with one exception: we normally use connection software Office Microsoft standard to logon remotely to our computers at home. We use dyndns to update the IP address of the computer and were marketed in the House so that each computer is accessed through our home router when a query of the DRC between the use of this port forwarding port.
However, all of a sudden we cannot Remote Desktop our personal computers through the WRT54GC.
If we put the original computer used to access the router from the hotel directly to the connection to the local network, then there is no problem and that computer can successfully remote desktop, but once we put the router in the equation, we cannot do.
Any thoughts? It's certainly something about the configuration of the router, but I checked the firewall and DNS, and those who are not suspects. The router configuration has not changed in recent years and has always worked previously.
Any help appreciated.
Thanks for the tip!
We have recently started using logmein.com. There is no charge for simple remote desktop, but the monitor resize and things is easier with it as the version of Microsoft, and for a small fee, you can activate on the management of files, allowing you to do things like file transfer between your home and remote computers easily. I had tried to do in the past using DRC and it was too slow, but not also with logmein.com.
That's why we have not been totally freak out the problem, because we had a backup solution with this product, but my husband has a phone in his office, he can connect to while overseas to make calls since in Australia (where we live) while he gets a charge local calls only, and it does not work with logmein , that is why we must get Microsoft DRC will once again!
In any case, we use dyndns to administer a dynamic update of our IP address for our home router, is to make our computers at home and in a last ditch effort, I had a look at our account and re-joined our IP against our dynamic naming. Hop, DRC said work again after that.
It is most strange, because the IP listed was the good IP, but somehow it seemed temporarily do not resolve correctly.
In any case, it's all fixed.
At least, it was pretty obvious that it was something somewhere between the router and the House, because of the way he acted. It's usually pretty obvious when your home network has fallen... we knew that is that since we could communicate by other means.
Thanks for the tip on the other remote tools. I will certainly check. There is never too much!
-
dv6645us problems with remote Mobile...
I'm not able to use the mobile remote with my laptop. I need the driver appropriate for the receiver infrared, as confused
how far to use... I think I remember that one is for this device, I have 2 of them. I placed the information for my mobile remotes from HP below. Please help, this is the only question I have... Just replace the motherboard, am stuck on the darn remote... Can't get out of my mind... The driver I have HP for the IR port does not load, windows cannot start the device with her...
Device is listed as a HID device, ENE CIR driver will not install and load, not sure if the system is to find the client IR port, would help as... I have the hardware, just rebuilt computer so I know its there, I put it.
Any help to solve this problem would be wonderful... Thanks in advance
Remote plug
435743-001 black rev B rc1762302/00
407313-001 rev B rc1762301/00 gray
Hey guys I got fixed. Thanks for your help...
As soon as you put batteries in the remote control, then command the computer with the remote control... Then turn it on or something because he showed running correctly, installed the drivers and appeared as a receiver, IR, or Consumer IR...
Helped new batteries on the remote control. As soon as he receives an order of the installed game, Im not sure why, but it was an IPN ha moment...
-
Problems with remote access IPSec VPN
Dear Experts,
Kindly help me with this problem of access VPN remotely.
I have configured remote access VPN IPSec using the wizard. The remote client connects to fine enough seat, gets the defined IP address, sends the packets and bytes, BUT do not receive all the bytes or decrypt packets. On the contrary, the meter to guard discarded rising.
What could be possibly responsible or what another configuration to do on the SAA for the connection to be fully functional?
It can help to say that Anyconnect VPN is configured on the same external Interface on the ASA, and it is still functional. What is the reason?
AnyConnect VPN is used by staff for remote access.
Kindly help.
Thank you.
Hello
So if I understand correctly, you have such an interface for LAN and WAN and, naturally, the destination networks you want to reach via the VPN Client connection are all located behind the LAN interface.
In this case the NAT0 configuration with your software most recent could look like this
object-group, LAN-NETWORKS-VPN network
network-object
network-object
network-object
network of the VPN-POOL object
subnet
destination of LAN-NETWORKS-VPN VPN-NETWORKS-LAN static NAT (LAN, WAN) 1 static source VPN-VPN-POOL
Naturally, the naming of interfaces and objects might be different. In this case its just meant to illustrate the purpose of the object or interface.
Naturally I'm not sure if the NAT0 configuration is the problem if I can't really say anything for some that I can't see the configuration.
As for the other question,
I have not implemented an ASA to use 2 interfaces so WAN in production environments in the case usually has separate platforms for both or we may be hosting / providing service for them.
I imagine that there are ways to do it, but the main problem is the routing. Essentially, we know that the VPN Client connections can come from virtually any public source IP address, and in this case we would need to default route pointing to the VPN interface since its not really convenient to set up separate routes for the IP address where the VPN Client connections would come from.
So if we consider that it should be the default route on the WEBSITE of the ASA link, we run to the problem that we can not have 2 default routes on the same active device at the same time.
Naturally, with the level of your software, you would be able to use the NAT to get the result you wanted.
In short, the requirements would be the following
- VPN interface has a default route, INTERNET interface has a default route to value at the address below
- NAT0 between LAN and VPN interface configuration to make sure that this traffic is passed between these interface without NAT
- Interfaces to special NAT configuration between LAN and INTERNET which would essentially transfer all traffic on the INTERNET interface (except for VPN traffic that we have handled in the previous step)
The above things would essentially allow the VPN interface have the default route that would mean that no matter what the VPN Client source IP address it should be able to communicate with the ASA.
The NAT0 configuration application would be to force ASA to pass this traffic between the LAN and VPN (pools) for VPN traffic.
The special configuration of NAT then match the traffic from LAN to ANY destination address and send to the INTERNET interface. Once this decision is made the traffic would follow the lower value default route on this interface.
I would say that this isn't really the ideal situation and the configuration to use in an environment of productin. It potentially creates a complex NAT configuration such that you use to manipulate the traffic instead of leave the mark of table routing choice in the first place.
Of course, there could be other options, but I have to test this configuration before I can say anything more for some.
-Jouni
-
Problem with remote access VPN
Hello
I installed a remote access VPN on my firewall ASA5505 via the ASDM Assistant.
I can successfully connect with the Cisco VPN client. My firewall also shows me the VPN session and shows the Rx packets. However, Tx packets remain 0, so no traffic is getting out. My ASA5505 is configured as a router on a stick with 25 different VLAN. I want to restrict traffic to one VLAN specific using a card encryption.
When I run a command to ping t on my connected Windows box, the firewall log shows me the following message:
"Unable to find political IKE initiator: outside Intf, Src: 10.7.11.18, Dst: ' 172.16.1.1
"This message indicates that the fast path IPSec processing a packet that triggered of IKE, but IKE policy research has failed. This error could be associated calendar. The ACL triggering IKE could have been deleted before IKE has processed the request for initiation. "This problem will likely correct itself."
Unfortunately, the problem is correct.
The "sh cry isa his" and "sh cry ips its ' commands show the following output:
2 IKE peers: 62.140.137.99
Type: user role: answering machine
Generate a new key: no State: AM_ACTIVE
Interface: outside
Tag crypto map: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: 85.17.xxx.xxx (outside interface IP)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (172.16.1.1/255.255.255.255/0/0)
current_peer: 62.140.137.99, username: eclipsevpn
dynamic allocated peer ip: 172.16.1.1
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 4351, #pkts decrypt: 4351, #pkts check: 4351
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
local crypto endpt. : 85.17.xxx.xxx/4500, remote Start crypto. : 62.140.137.99/3698
Path mtu 1500, fresh ipsec generals 82, media, mtu 1500
current outbound SPI: B3D60F71
current inbound SPI: B89BA14A
SAS of the esp on arrival:
SPI: 0xB89BA14A (3097207114)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program,}
slot: 0, id_conn: 196608, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 25126
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFE1FFF8 0xFFFFFFFF
outgoing esp sas:
SPI: 0xB3D60F71 (3017150321)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program,}
slot: 0, id_conn: 196608, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 25126
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
I really have no idea what's going on. I installed a remote access VPN countless times, but this time it shows me the error as described above.
Hi Martijn,
just a few quick thoughts:
-is your ok NAT exemption, i.e. ensure that the return traffic is not NAT' ed.
-Make sure that there is no overlap crypto ACL
-When connected, make a package tracer to see what is happening with the return packages.
for example
packet-tracer in the interface within the icmp 10.7.11.18 0 0 172.16.1.1 detail
(where is the name of the interface on which 10.7.11.18 resides)
This will show you all the steps the rail package in-house (routing, nat, encryption etc.) so it should give you an idea of what is happening, for example when it comes to the bad interface, nat evil rule, wrong entry card crypto etc.
HTH
Herbert
-
Problem with remote access VPN on ASA 5505
I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.
The VPN client connects is as follows:
---------------------------------------------------------------------------------------------------------------------------------------
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.2.9200
2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002
Start the login process
3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "*." **. ***. *** »
5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B
Try to establish a connection with *. **. ***. ***.
6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***
8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012
Attributes of the authentication request is 6: 00.
9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***
18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194
20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70
38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0
39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1
40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8
41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001
42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO
43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00
45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0
49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***
50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047
This SA was already alive for 6 seconds, setting expiration 86394 seconds now
54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***
57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = CE99A8A8
58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924
61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
---------------------------------------------------------------------------------------------------------------------------------------
The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):
: Saved
:
ASA Version 8.2 (5)
!
hostname NCHCO
Select hTjwXz/V8EuTw9p9 of encrypted password
hTjwXz/V8EuTw9p9 of encrypted passwd
names of
description of NCHCO name 192.168.2.0 City offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address **. ***. 255.255.255.248
!
boot system Disk0: / asa825 - k8.bin
passive FTP mode
access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0
Standard access list LAN_Access allow NCHCO 255.255.255.0
LAN_Access list standard access allowed 0.0.0.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
network-acl outside_nat0_outbound
WebVPN
SVC request to enable default svc
Enable http server
http 192.168.1.0 255.255.255.0 inside
http *. **. ***. 255.255.255.255 outside
http 74.218.158.238 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform
Crypto ipsec transform-set l2tp-transformation mode transit
Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs Group1
crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation
dynamic-map encryption dyn-map 10 value reverse-road
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 74.219.208.50
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto vpn-map 1 match address outside_1_cryptomap_1
card crypto vpn-card 1 set pfs Group1
set vpn-card crypto map peer 1 74.219.208.50
card crypto vpn-card 1 set of transformation-ESP-3DES-SHA
dynamic vpn-map 10 dyn-map ipsec isakmp crypto map
crypto isakmp identity address
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 15
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 35
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP ipsec-over-tcp port 10000
enable client-implementation to date
Telnet 192.168.1.0 255.255.255.0 inside
Telnet NCHCO 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH NCHCO 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 192.168.2.150 - 192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
lease interface 64000 dhcpd inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec
nchco.local value by default-field
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
allow password-storage
enable IPSec-udp
enable dhcp Intercept 255.255.255.0
the address value VPN_Pool pools
internal NCHVPN group policy
NCHVPN group policy attributes
value of 192.168.2.1 DNS Server 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec
value by default-field NCHCO
admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username
username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg
username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password
attributes global-tunnel-group DefaultRAGroup
address (inside) VPN_Pool pool
address pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
authorization-server-group (inside) LOCAL
authorization-server-group (outside LOCAL)
Group Policy - by default-DefaultRAGroup
band-Kingdom
band-band
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NOCHECK Peer-id-validate
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
tunnel-group DefaultWEBVPNGroup ppp-attributes
PAP Authentication
ms-chap-v2 authentication
tunnel-group 74.219.208.50 type ipsec-l2l
IPSec-attributes tunnel-group 74.219.208.50
pre-shared key *.
type tunnel-group NCHVPN remote access
attributes global-tunnel-group NCHVPN
address pool VPN_Pool
Group Policy - by default-NCHVPN
IPSec-attributes tunnel-group NCHVPN
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:15852745977ff159ba808c4a4feb61fa
: end
ASDM image disk0: / asdm - 645.bin
ASDM VPN_Start 255.255.255.255 inside location
ASDM VPN_End 255.255.255.255 inside location
don't allow no asdm history
Anyone have any idea why this is happening?
Thank you!
Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.
With respect,
Safwan
-
Problem with remote control in Windows 7 Ultimate
Hi guys,.
I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit
the remote control has stopped working & I tried to look for a solution but no luck.
Please can you help me with this problem
Thank you.
Published by looks on 02/11/2009 04:51Hi Jajomafa,
My problem was resolved a few days ago.
There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.
The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)
I suggest that you run the automatic update.
I hope this helps.
Kind regards.
-
Weired problem with Remote desktop and WLan on Tecra M7
Hello
I regularly use Microsoft Office remote to connect to my work PC to my laptop (TOSHIBA TECRA M7 Tablet) home.
However, since buying (not had long), the remote desktop connection drops and I can't reconnect to the Toshiba laptop.It seems that when I connect to the start via Remote Desktop and the connection start screen appears after a short time 10-25mins laptop Toshiba Wifi connection drops.
When I try to reconnect it does not allow me to do.
I have to physically come back home and logon to windows XP and then re - activate the wifi.I did the following to here.
1 UPDATE the latest BIOS
2 UPDATE WIFI INTEL PRO ADAPTER TO THE LATEST DRIVERS
3. NOT MY BROADBAND, AS PREVIOUSLY, HE WORKED WITH HAPPINESS ON MY OLD LAPTOP.
4. NOT MY WORKING BROADBAND CONNECTION WORKED FINE BEFORE AND IS STILL WORKING ON THE OLD INSTALLATION
5. HAVE YOU TURNED OFF ALL THE POWER ON THE LAPTOP AND WIFI PROPERTIES MANAGEMENT, WHERE HE WOULD SLEEP.PLEASE HELP, IT IS NECESSARY FOR EMERGENCY
Hello
Do you use the Intel Proset utility to configure the WiFi connection?
Try to configure the WiFi network using this tool and check if the WiFi network would disconnect again.I m also interesting this driver Wlan did you use?
Did you use one page of Intel?
If this is not the case, check the Intel page for the new WLan driver version.
Maybe you are looking for
-
Manual maintenance and XW8400 directs you to HP Backup and Recovery Manager. http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults?sp4ts.Oid=1844968&AC.admitted=1... Are there any repairs? REO
-
Delete 'toolbar_log.txt '?
Original title: huge log file I'm trying to clean my drive to get more space. I found a file called "toolbar_log.txt", which takes up 5.55 GB. Do I need this? If this isn't the case, I can stop being written in? I am running Windows XP SP3 on an IBM
-
WCV80n installation TZO or other
My name is Dan. I want to install 2 or 3 of these cameras in my house, and I have already exhausted the TZO free 90 day service that ended last year. I have never updated or kept the information for TZO. The TZO was part of the installation and so
-
No such interface supported keeps popping up on the pictures, word does not... A lot of problems.
-
Latitude e6320 with mSATA?
Hello I have a laptop Latitude E6320. There are 3 mini PCI slots inside: -one for the card WiFi; -one for card WWAN; - and the other with nothing wrriten thereon. Is it possible to use this slot "no name" for mSATA SSD? Thank you