Problem with Remote Desktop using router WRT54GC

Similar Questions

• Connection problems with remote desktop connection

  Good somehow I try to connect to my remote friends computer and it has a windows 7 and I already configured on his computer. I already forwarded Ports on his computer, his static IP, added exception to the firewall, including Norton Internet Security Firewall 2013, so his remote desktop connection is good. But my computer is a Windows Vista Home Premium, but somehow, it wont let me connect it keeps telling in a dialog box with this error:

  Say this 'Remote Desktop disconnected"
  "Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  But it's is not my friends computer problem, its my computer, I would have never been able to use Remote Desktop on my computer, I have no idea why. I also configured with my router Embarq EQ 660 - R in the NAT rule SUA Port 3389 with my routers IP. But somewhere in my firewall, it doesn't let me use the same TCP 3389 port, it won't let me enter any number of his strange. Well, I have the screen shot a photo so I'll attach the image so you can see what I mean. But I already have my friends computer sent a static router IP configured on him and on his router port everything worked fine, but the problem is mine, don't let me not the port before my router only if I use the NAT option and entering into the rule of SUA, in which I made with port 3389 , and my default gateway static IP.  I also added an exception to my Windows Firewall and also my Norton Internet Security firewall, 2013 including the application, but still somehow, it does not work. On my router, if I try to put the port range: 3389 to 3389. Added the name of Service like RDP, Type of Service: TCP. Also, I made my public computer static IP a little go. A how's my friends computer it works

  Thanks I would really appreciate it

  Hello Cristian,

  I understand that you can not connect to connect to the computer Windows Vista Home premium to Windows 7 computer using remote desktop.

  I wish to inform you that you can not use Remote Desktop connection to connect to the remote computer (host) running the following editions of Windows Vista:

  ·         Windows Vista Starter

  ·         Windows Vista Home Basic

  ·         Windows Vista Home Basic N

  ·         Windows Vista Edition Home Premium

  You can also view the below article for more information.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions#EI

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• Problem with remote desktop access

  Hi, using windows xp service Pack 3. and when I try to connect with the help of remote desktop citrix.it shows error like "the service user profile Service does not log. User profile cannot be loaded. "and sometimes as"the Group Policy Client service does not log. access is denied. "  can any body help on this problem? .

  I tried to solve the problem by deleting the existing user profile and create again new profile, but the issue is not resolved.

  Can I get any solution for this?

  my pc configuration is:

  Windows xp, service Pack 3.

  Thanks in advance

  Hello pcsekhar,

  For this specific issue, please post to the address provided below.

  Remote Desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Weired problem with Remote desktop and WLan on Tecra M7

  Hello

  I regularly use Microsoft Office remote to connect to my work PC to my laptop (TOSHIBA TECRA M7 Tablet) home.
  However, since buying (not had long), the remote desktop connection drops and I can't reconnect to the Toshiba laptop.

  It seems that when I connect to the start via Remote Desktop and the connection start screen appears after a short time 10-25mins laptop Toshiba Wifi connection drops.
  When I try to reconnect it does not allow me to do.
  I have to physically come back home and logon to windows XP and then re - activate the wifi.

  I did the following to here.

  1 UPDATE the latest BIOS
  2 UPDATE WIFI INTEL PRO ADAPTER TO THE LATEST DRIVERS
  3. NOT MY BROADBAND, AS PREVIOUSLY, HE WORKED WITH HAPPINESS ON MY OLD LAPTOP.
  4. NOT MY WORKING BROADBAND CONNECTION WORKED FINE BEFORE AND IS STILL WORKING ON THE OLD INSTALLATION
  5. HAVE YOU TURNED OFF ALL THE POWER ON THE LAPTOP AND WIFI PROPERTIES MANAGEMENT, WHERE HE WOULD SLEEP.

  PLEASE HELP, IT IS NECESSARY FOR EMERGENCY

  Hello

  Do you use the Intel Proset utility to configure the WiFi connection?
  Try to configure the WiFi network using this tool and check if the WiFi network would disconnect again.

  I m also interesting this driver Wlan did you use?
  Did you use one page of Intel?
  If this is not the case, check the Intel page for the new WLan driver version.

• I have a problem with remote desktop,

  Original title: Remote Desktop

  has worked before, since the evolution of the modem, it does not work

  Hello

  In addition, I would have you post here as well.

  http://social.technet.Microsoft.com/forums/Windows/en-us/afc828ed-cca2-4AAA-AD77-c61ced66f627/Virtual-PC

  Back to us for problems with Windows.

• Problem with remote desktop on Windows 7

  On my Windows 7 machine, when I try to use the remote desktop connection, after entering the password it waits a few seconds and then hangs with the message: remote connection Deskptop has stopped working. My work around was to use the DRC in the Windows XP virtual machine. I'm working on a new project where I need to access a Windows VPS Server 2012, which does not allow connections to Windows XP running. I've disabled most of the local resources in the DRC but no luck.

  Hi Hubert,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Problem with remote desktop in Windows 7 Home Premium

  I have two laptops running Windows 7 Edition Home Premium.  I do a simple administration of a 2008 R2 remote server, for a friend and all of a sudden, remote desktop will not connect to the server on one of the laptops.

  I checked all the settings, of course, and the problem is NLA.  I get the error message: requires NLA (Network Level Authentication) that your computer not only supports the remote computer that you are trying to connect to.

  I thought it was strange that I never set the server to require NLA.  I know I should but anyway...  I checked that the server is in fact not the value require NLA, so this should not be preventing the connection.

  Now, two laptops have DRC version 6.2.9200, but non-functioning LT said that NLA is not supported in the "information" window.  Two portable computers support Remote Desktop Protocol 8.0 

  Even if NLA is not required on the server, if it is set to the work of LT, why not at least try?  Even if it's just to eliminate a point of failure.  None of this is hard, right? Bad...

  I went in the LT does not work to change the DRC to allow the NLA (System, remote control properties) However, there is nowhere where do...   There is an option to "Allow remote access" button and an "Advanced" button.  Under the "Advanced" button, there are two elements to control the limits of the use of remote assistance.  There is an option button to enable remote assistance and the other to set the amount of time that the remote computers can be connected.  Nothing to control NLA.   On the functioning LT, which has the same version of the DRC, IT IS A PLACE to CHANGE NLA.  I'm confused.  How the same version of DRC can have two different menus?

  Just for fun, I tried even to DRC running in compatibility mode.  Nothing...

  Is there a registry change that will allow me to activate it?  I do not always have access to the laptop works.  I need to bring both work.

   

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Problem with remote desktop connection

  OS: Windows 7 Professional SP1

  When trying to connect to any computer, an error message appears indicating "an internal error has occurred."   There is no additional information for the error message.  When you look through the logs of applications (Applications\microsoft\windows\TerminalServices-ClientActiveXCore), there is an entry corresponding to the attempt which says:

  EventID 1105 - multiple transport connection has been disconnected

  and

  EventID 1026RDP ClientActiveX has been disconnected (reason = 4)

  Anyone working in it, or know what could be the problem?  Thank you!

  (Moved to programs)

  Hi Kris,

  I suggest you post the question on the link below. The link below is the support forum for Windows 7 TechNet for networking. This team is a team dedicated to the issue that you are facing.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other questions about Windows.

• Remote Desktop, using Windows 7 Ultimate, then along the side windows 2 7 build 7100. Questions...

  When I go to access another computer via desktop remotely, it gives me the following error...

  "The connection was refused because the user account for the remote access connection is not allowed."

  OK...

  So, I found that I needed to do things, like adding groups and what not.

  So I went to the screen the system, click on settings remotely on the left side, then in the new window I greeted remote assistance and Remote Desktop (both secure and unsecure option) then I went to select users... Add locations. But all that shows is the computer im. Im stuck please help :D

  "

  To connect to a remote computer with Remote Desktop [DRC], you need a user name that is a member of the Remote Desktop Users group on the remote computer, IE. PC - A, for example, or a user name which is administrator on PC - A. The user ID is local to PC - A. The user ID must have a password. On PC - A simply type the name of the standard user in the window enter the names of the objects to select . Click check names to verify that this is a valid username on PC - A.

  Now, when you open the connection of the DRC on the remote computer PC - B use the local LAN IP or the NetBIOS name of PC - A and previously set up PC - A user name and password to connect. If your call over the public internet from a remote location using the public IP of PC - A or PC - A is behind a router, the public IP address of the router. In the latter case, you will need to also to the front/open TCP Port 3389 through the router to the IP LAN of the PC - A static method.

  FWIW here are my DRC using small pages which you may, or may not, be interested.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html
  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Problem with "Extended desktop", integrated display is disabled

  Hi all

  I have a MacBook Pro 13 inch early 2011 with OSX El Capitan 10.11.4.

  Just before I upgraded to 10.11.4, I use to work with "extended desktop" using the built-in screen and the external monitor. Since the update, whenever I connect the external display it goes automatically to the external screen and completely disables the built-in screen. Sometimes removing the HDMI cable (with mini port adapter), putting the MacBook to sleep, log in again and the Mac, the awakening back on two screens, but most of the time he spends just go back to the external display only. This gets really annoying.

  When you use the external monitor display poster preferences only options of this monitor and my arrangement tab is missing (like the built-in display is temporarily disabled). By clicking on "Detect displays" (after pressing option to show) doesn't change anything. Using the brightness to toggle keys mirroring does not work either.

  Is - it there anyway that I can configure so worth by default "Extended desktop" with built-in monitor on and external display?

  Any help will be appreciated.

  Thank you

  Hi there Ajgalvezm,

  It seems that your computer does not work with your monitor external because you upgrade 10.11.4. I would use these steps in the following article to help you solve problems that:

  Get help with graphical problems on external displays connected to your Mac.

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Thank you for using communities of Apple Support.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• Desktop HP Pavilion - p7 1549: problems with my desktop HP Pavilion - p7 1549

  I have problems with my desktop computer, do very strange things.  A few weeks ago, it would not start and complained no found boot device.   I went into the bios setup and just reset the values by default and it worked for a few weeks.  Now it does not start at all.

  I tried to access the system with F11 recovery and he complains about some secure boot options, I tried to disable secure boot and it still does not work.

  I tried to put another disc in and install Windows on it, but I could not.  Is it possible to upgrade the BIOS by booting to a USB port?  I tried to download the new bios file, but it didn't do anything after that I ran it (he didn't not create a folder for me).

  Everything seems really slow, takes a few minutes to get into the bios or boot options.  I took out the hard drive and plugged into another computer with an external enclosure and my other computer recognizes the drive.

  I tried to do a system restore to factory default start repair/restore and all have failed.  I deleted very recently on the main partition on my drive to try to install 10 Windows on the drive.  The computer appears to be frozen for a long time before continuing with the guests of installation.

  I took out the CMOS battery and you press the power button with the computer unplugged.

  Don't know what else I can try, I'm starting to think that something is wrong with the motherboard.  The computer starts up fine and I can boot a USB Windows install and the keyboard, mouse and video work.

  I think the next thing I will try is tent to start on a standalone update or ubuntu USB boot bios.

  Not really concerned about my data, I just want to get this computer working again.

  Any suggestions are appreciated, thank you.

  Thank you for the additional information.

  No, you can create a copy of the recovery media.  However, you can purchase the HP media .  If you decide to do a full install, check here first to make sure that the software and drivers are available.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Problem with the desktop icons

  I have the problem with the desktop icons... they come from both sides... one above the task bar and on the other hand under the task bar too... I'm unable to remove those who are below the taskbar.

  Hello

  You can try following the steps provided below and check if this can help, make sure that closing all open programs:

  (a) the Task Manager open by right-clicking on the taskbar

  (b) in the process tab, right-click on "explorer.exe" and complete the process

  (c) screen will be blank, except for the Task Manager.

  (d) open the file - new task (run)

  (e) enter "explorer.exe" click OK.

  If the problem persists, try to create a new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  See also: http://windows.microsoft.com/en-us/windows-vista/fix-a-corrupted-user-profile

  Hope this helps,

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.