Delete 'toolbar_log.txt '?

Similar Questions

• fragmented files Documents and Settings\User1\Local Settings\Temp\toolbar_log.txt

  I'm going to defragment the cause there are a lot of red and gives files thinking about the computer. There are still two blocks red af after defragmentation. We have 709 fragmented files. the only thing he tells me is to defragment again. This is a sound block saying me the corresponding problem. Documents and Settings\User1\Local Settings\Temp\toolbar_log.txt

  Hi Jason,

  1. to confirm, do you use the Windows XP operating system?

  2. do you get an error message? If Yes, what is the full error message?

  It seems that we have to clean the unnecessary files and check if the drive works properly or not.

  I suggest you perform the steps.

  Method 1: Use the Disk Cleanup tool and check if that helps you.

  See also:

  How to automate the disk cleanup tool in Windows XP

  Rerun defragment and check.

  Method 2:

  Alternatively, you can scan the hard disk for errors. You may need to run the scan several times and make sure that the disc is clean.

  Reference:

  How to perform disk error checking in Windows XP

  Chkdsk

  You can opt chkdsk/r

  Note: He performs a comprehensive check, even if the drive is not marked for chkdsk to run. This parameter is none of the changes on the disk.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Once you have finished the cleaning disc and chkdsk, you can perform defragment to see if it solved the problem.

  Hope this information helps. Response with status so that we can help you.

• my "toolbar_log.txt" is 38 GB, if I erase it - is it possible to lose something important or programms I?

  my "toolbar_log.txt" is 38 GB, if I erase it - is it possible to lose something important or programms I?

  Hello

  I guess you are running AVG anti virus protection? In AVG versions there was a bug which was causing this log file growth. Please see this avg forum thread.

  Best thing to do is upgrade to the latest version of AVG and see if that fixes it.

• Delete SMS txt

  Hi all. I read a lot of posts around that. I'm not the master in that, but without putting in place some settings on the server side as it says in:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/796557/800451/800563/...

  Firstly I can visit on this server, second I want to remove these sms messages on my personal blackberry not manually but programming in JDE an app.

  The main reason the app that I want to write, it is to remove sms txt income which contains some special body or the code.

  Scenario: message sms arrive, I take him necessary info and after I want to remove it.

  Someone said in a post that we should move far when comes the sms txt, but how...?

  Maybe it's a way to remove their device physics but not manually. Like to find the message in the SMS Inbox and delete (but how? what classes, packages should I use for this?)

  Please help me with this, with a few tips, useful links.

  Thank you in advance.

  BlackBerry Enterprise Server doesn't send SMS messages.  There is no configuration is not required for the application of Pocket side listening for SMS messages.  The configuration of the system message is defined by the application server SMS sending-side.

• BlackBerry Curve 3 G guard smartphones delete my txt messages...

  Hi all
  I have the Curve 9300 3, running on the OS 6 (6.0.0.600, platform 6.6.0.223)
  The appliance is automatically delete messages after a few feeks, from the oldest (they last about 1 month they are deleted..)
  I tried to look for a "how long to save messages" option in the device and could not find a... It says in the manual of the device and the device Help\Search even he know:
  Home-> messages-> options-> display messages and Actions , but this subcategory option does not appear on my device message options (I Googled it and also ppl said they don't find this option on their 3 G curve...)
  Optionally, messages, I have this subcategories:
  General text messaging options, text SMS, MMS and in none of them, it is an option about how long keep txt messages...

  * Cleaning memory is disabled
  * Also in some searches in google ppl said free bit of memory. It is not the problem... I have 70 MB of free space on the device and 7 GB free in my memory card... my BB is new... only 2 months old

  So where can I configure the settings of the device regarding backup my messages?
  Thank you

  If you read my post carefully, you can see that I know that... I wrote in my post..

  I found out why I don't see this menu: display messages and Actions, there is a bug in the OS 6 with my BB or just with curve 3G I don't know... other people reported my problem as well

  When I go in the options of the messages, it don't you this submenues:

  Actions and messages display

  Inbox management

  Email management account

  Spell check

  Text messaging

  After going to the message options, it goes directly to text messaging... and does not show these 5 menus

  and because of this bug, I can't even find 'Actions and the message' to the General search of the device...

  the solution:

  See call logs, then select one of the call logs, press the 'home' button and select options

  then you see the 5 sub-categories\menues with the display of messages and Actions, among them, go inside and there, you can select the option of how long to keep messages

  took me time to play with the device to find this bug of shit and find another way to get this display of messages and Actions...

  hope it help others with this bug in the operating system

• How can I delete a txt file header

  Hello. I have a file acquisition and this remove_headers.vi does not in my mind. I m attaching the file and the remove_header.vi file after the header removeing.

  Pls help.

  Thank you very much...

  Hello

  For playback of multiple txt files, you can use a function of the range of I/O file list folder. Refer to the attached vi.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• BlackBerry Smartphones deleting massive txt help

  I'm new to Blackberry. I have accumilated much message via text, and can not figure out how to remove them all at once, rather than each individually. Any helpl would welcome thank you.

  Open your SMS folder and then highlight the separator bar date more recent.

  Tap Menu > delete all before.

  Or, in your messages folder, select Menu > view folder > SMS, and do the same thing.

• messages txt takes forever to delete

  Has anyone tried to delete a txt message, regardless of how long the message is that it takes up to 30 seconds to remove, it's so frustrating

  Is - this another bug

  Go to your Apps drawer (no parameters) and open the application called "Backup & Restore", select "Manual backup", check "Conversations" and press BACKUP.

• ACS 5.6: Problem with deleting a file via cli

  Hello world

  I am trying to automate the removal of 5.6 ACS network devices.

  I have delete.csv file with the list of devices I want to delete:

  name:String(64):RequiredTest0Test1

  When I connect to ACS CLI and run the command to remove the import file I get this result:

  .../acsadmin(config-acs)# import-data add device tftp delete.csv delete_res.txt abort-on-error noneCannot start import.Header is incorrect. Download Import Template for required header record.

  But when I run the web management import file, everything goes well:

  -------- Summary --------Total Number of Records Processed 2Number of Records Failed 0Number of Records processed successfully 2

  So please, this is where someone who knows what I did wrong? Thank you

  To remove devices, try the following command:

  import data delete device tftp delete.csv delete - res .txt abort error no

  In addition, make sure that the file is plain text only. If you're still having problems, check the following debugging:

  mgmt-log debug level debugging

  Then repeat the process, download a support package and to look at the logs for clues.

• I need assistance with VMware Player Manifest.txt file

  I make a program of federal work with ITT Technical Institute study. Well, we have VMware Player installed on lab computers, and on a weekly basis, I have to empty the student accounts.  Well some student accounts I can't delete, I am logged in as the administrator of the Local Machine and when I try to remove most of the accounts I get the message saying that the manifest.txt file is "cannot delete manifest.txt.2: access denied."  Make sure that the disk is not full or write protected and that the file is not currently in use. »

  and see that I have clear accounts because space is limited on these machines.  I was just wondering if any 1 can help me on how to remove this file, it would be greatly appreciated and if I have this post in the wrong section will be some 1 let me know?

  Thank you

  If the boot without failure for the administrator account and not be able to delete a file under the other user account or the account itself, there is something else wrong.

  First, I make sure that no VMware not associated with the process are running which must be in Mode safe and then I would take a look at the permissions on the file and, if necessary and or possible I would take possession in order to delete the file.  Otherwise issues that may could be corruption of the file system, in which case I would run chkdsk with the argument/f or if it's just that a file could / can be an area damaged the disk hard physics so you can test the physical hard drive with a diagnostic tool specific HARD drive manufacturing.

  Other options would be to try to remove the file from the Recovery Console by booting from the installation disc or Windows using a Linux Live OS like Slax.

  BTW is this topic on the host or guest?  If in a guest I just delete the virtual machine and replace it from a backup and if it is on the host computer, then this is not really a matter of VMware itself and it is more a problem of Windows Administration and must be treated accordingly from the point of view of the user account and or file system management regardless of the application that created the file and act accordingly.

• fragmented hard drive files

  I have a block of fragmented files that 13,78 Gig and defragmentation does nothing to get rid of it on my hard drive. My OS is XP

  Well done.

  You have enough free space to defragment to run.

  Only one problem, this is the toolbar_log.txt file of AVG and it is a known problem with AVG and you can read about it in their forums here (just an example - look in their forums):

  http://forums.Avg.com/us-en/AVG-forums?sec=thread&Act=show&ID=188280

  Here is some information:

  http://blogs.Avg.com/community/AVG-feedback-Update-9-bloated-toolbar-log-files/

  I don't use AVG and won't, but if you want to continue using it, you may ask AVG what to do about such things because obviously they know about it.  Perhaps you need an update, disable certain things or consider replacing it with something like Microsoft Security Essentials which doesn't have these problems.  Your system will give you better performance.

  If you choose to replace your AVG with MSE, remember to use the uninstaller that you can find here:

  http://www.Avg.com/us-en/utilities

  Then you have things like:

  17 1 MB \System Volume Information\_restore {129201FA-B0AC-49B3-96B2-DEB8B91E727B}-RP1\A0000105.exe

  You have a lot of RP1 and who would be the 1 system restore point.

  Such are the XP system restore points and RP1 goes probably back a certain ways unless you've been fidlding with your options of SR - perhaps at least 90 days.  The default time for RPs to 'live' on a system is 7776000 seconds (90 days).  It could be your RP1 is afflicted and you can just knock that one if you want, but you will need some third paryt tool to choose what RPs to hit.

  You could use something like CCleaner to knock out the old RPs or just whack RP1 and see what things look like, or use disk cleanup which will hit all but your last RP.  If you don't think that you care about your course of the last 90 days of RPs, which could be a good idea for you help to leave.

  I don't know why XP sometimes seems to have a hard time with RPs, but sometimes it is, but there are alternatives to the construction in the XP Defragmenter.

  The XP Defragmenter is a lighter version of the popular tool of Condusiv Technologies, called "Diskeeper.  It does a pretty good job most of the time, but there are other (often free) tools that people like best.

  Here are some popular third-party tools that you can analyze and you can do some research on Google for others (in no particular order):

  Some people like the piriformis products and their application of Defraggler suite, you can get here:
  http://www.Piriform.com/

  Some people like the suite Auslogics products and their application Defragmenter that you can get from here:

  http://www.Auslogics.com/en/

  Some people like more PerfectDisk products and their application Defragmenter that you can get from here:

  http://www.Raxco.com/

  Diskeeper (not free)

  http://www.condusiv.com/products/Diskeeper/

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• How can I disable the guest user to close the PC while the Admin is connected?

  I'm running Windows 7 Ultimate. I found out how to disable the guest user closing at all via the local security policy, but then they can't stop even if the Admin account is offline.

  To clarify a bit, say I want to give my PC to someone, I usually click on change user and connect using the guest account. In this way, they can't access my account because it asks for a password. I want that in such a case, they should not be able to stop the PC as my admin account is always logged.

  However, if someone booted the PC themselves and use the guest account, then they should be able to close too, as my Admin account has not been connected.

  I'm running Windows 7 Ultimate. I discovered how to disable the guest user closing all through local security policy.

  It is the correct method. It is as robust as it is unconditional.

  If you want to have your cake and eat it the guest account must use a powerful "agent" to perform the functions of judgment. A scheduled task would be such an agent. It might work as follows:

  1. Create a scheduled task that runs Script1 to perform these tasks:
     -Check if the C:\Shutdown\Shutdown.txt file exists.
     -If not, the output of the script.
     -If this is the case, delete Shutdown.txt.
     -Check if there is an administrator session. If so, the output of the script.
     S ' there is no live administrator session, shut down the computer by using shutdown.exe.
     The task must run under an administrator account once every 3 minutes.
  2. Create a shortcut on the desktop for the Guest user calling Script2 for these tasks:
     -Check if there is an administrator session.
     -If this is the case, create a pop-up to inform the user that the machine cannot be stopped.
     -If it is not, create the C:\Shutdown\Shutdown.txt file. The scheduled task will 'see' this file and will stop the machine.

• Installation of NVIDIA GeForce GTX 780 CUDA?

  Hi guys!

  There is, in my previous installation of my Windows7-64, my CUDA cards four months have been installed and working optimally with Adobe first CC 5.5. Unfortunately, I had to reinstall Win7 with a clear installation. Trouble now let first CC.5 to recognize the card installed with the help of CUDA.

  What is done; I have the latest NVIDIA driver for the card installed. In my Panel control NVIDIA CUDA engaged and Adobe Premiere are also included in the dedicated CUDA support. However, the reading Mercury engine does not appear in sequence > > Composition > > reading. Previously, he was a motor Mercury CUDA listed here, today only "hardware (if supported). "Of course,"The secret"file cuda_supported_cards.txt" are supported the spirit of my GPU name, exactly as my

  TechPower GPU - z has make my card GPU CUDA name.

  What can I check? Grateful for all the advice and tips.

  Just delete the .txt file. It's the easiest way.

• How to make space on the prod instance.

  Hi experts,

  My prod instance goes on a low disk space. I want to erase unused prod database and application file. but I do not know what file I need to delete and how.

  Please suggest and provide any doc id I can follow.

  concerning

  pritesh Rodriguez

  Pritesh salvation,

  There are some newspapers, cache and deleted files txt files periodically,

  Before you clean these files take a backup and continue cleaning.

  Next to the database.

  You can clean the files in diagnostic_dest for 10g, 11g and bdump, cdump-udump

  Next to the request.

  -$INST_TOP/logs/ora/10.1.3/Apache:
  access * journal
  error * Journal

  -$INST_TOP/logs/ora/10.1.2/reports/cache
  o*.txt
  o *. EPS
  o *. XML

  -$INST_TOP/logs/ora/10.1.2/forms
  ennemywerrybor'em *. RTI
  frmweb_dump *.

  -$INST_TOP, newspapers, ora, appltmp
  OF*.t

  -$INST_TOP, newspapers, appl, conc
  *.txt
  *. Mgr
  *.reg
  *.log

  with the ROOT user
  # /usr/tmp/*.tmp

  For more details, please see the notes that follow, it would be useful,

  Cleaning of an Instance of redundant files (Doc ID 274666.1) 11i applications

  How to operate the simultaneous Purge request and/or data manager program and the Tables it Purge? (Doc ID 154850.1)

  Purge strategy of e-Business Suite 11i (Doc ID 732713.1)

  Check this thread, this can help,

  Purging / deleting file journal, redundant files and vice versa

  Thank you best regards &,.

  Knockaert