Problem with removal of duplicates in Windows Search.

Similar Questions

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the application mail in Windows 8

  Original title * app email windows problem 8

  my windows mail 8 app suddenly stopped receiving and sending e-mail, but they are received in the mail from bt

  Hi Neil,

  Thanks for posting your query on the Microsoft Community.

  As described in the question, I understand that you are unable to send and receive emails.

  This issue would have occurred due to corruption Mail app.

  I need some information to move forward.

  1 did you changes to the computer before the show?

  2. which email account you set up with Windows mail app?

  I suggest you follow the methods to check if it solves the problem:

  Method 1: Run the Windows 8 App troubleshooting tool.

  This utility automatically solves some issues that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Follow the instructions in the link below:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  I hope this helps. Please let us know the results. We will be happy to help you further.

• I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  Hi bakhytz,

  Could you please check if the opacity is set to the maximum value and feather is set to a lower value in your spotting tool parameters.

• Problem with Remove-VDSwitchVMHost

  Hi guys,.

  First of all... Here's the PowerCLI version I use:

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.1 Release 2 build 1012425

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.1 build 768137

  VMWare ImageBuilder PowerCLI component 5.1 build 768137

  License of VMware PowerCLI component 5.1 build 669840

  VDS's VMware PowerCLI component 5.1 build 1012428

  VMware vSphere PowerCLI component 5.1 build 1012428

  I'm having a problem with Remove-VDSwitchVMHost which is a bit frustrating. I have a script that I use to rebuild hosts in my environment when we upgrade versions. I recently changed my vDS switches. When the host is rebuilt, there is a phantom entry in the vDS for the old server. For some reason, I can't remove it with Remove-VDSwitchVMHost.

  

  The two hosts in this group appear in the GUI. Esxt21 is the server, I just rebuilt and added to the vCenter.

  When you go through PowerCLI, it presents different information:

  

  When I get home: get-vmhost $vmhost | Get-VDSwitch nothing is returned. If I list the switch first, then get-vmhost, it shows data:

  

  Get-VDSwitch $vDSName | get-vmhost $vmhost | Delete-VDSwitchVMHost does not seem to work either.

  I can delete the host via the interface graphics, but which goes against the idea of a script

  Someone had a bit of luck with this?

  Thank you

  Dan

  Got, it works now! Here's the code to work:

  $vmhost = "myhostname".

  $vDSName = "myvdsname".

  $vmhostid = (get-vmhost $vmhost) .extensiondata. Moref.Value
  $vDS = (get-VDSwitch $vDSName)
  $vDSView = get-view-Id $vDS.id
  $vDSView.UpdateViewData)

  # - ReconfigureDvs_Task -
  $spec = new-Object VMware.Vim.DVSConfigSpec
  $spec.configVersion = $vDSView.Config.ConfigVersion
  $spec.host = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec [] (1)
  $spec.host [0] = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec
  $spec.host [0] .operation = 'delete '.
  $spec.host [0] .host = new-Object VMware.Vim.ManagedObjectReference
  $spec.host [0].host.type = "HostSystem.
  $spec.host [0] .host. Value = $vmhostid
  _this $ get-view-Id = $vDS.id
  _this $. ReconfigureDvs_Task ($spec)

  Thanks for your help!

• problems with connecting business valueapps in Windows Vista

  Have rec'd error Windows indicating that logic ValueApps has stopped working:

  Problem event name: APPCRASH

  Application name: ValueApps.exe

  Application version: 1.4.03

  Fault Module name: ValueApps.exe

  There was an automatic update 27/01/14 and, once again, 12/03/14.  I have Windows Vista (64) and have problems of interface with many business websites (online payments, for example) which I have never experienced before.

  Another file is TBverifier.dll; However, that one has not changed since 08/25/13 and don't seem to be a problem.

  What can I do to fix this?  Looks like this are updates of Conduit, Inc.

  Threads merged, but not deleted because it contains additional information about the problem of duplicate

  Hello

  Read this: http://www.shouldiremoveit.com/ValueApps-78723-program.aspx

  Led load Malware.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• Problem with internet connection Wi - Fi Windows XP - very 'slow' packages

  Hi people, this problem has been driving me crazy for weeks, so I wonder if someone can provide a solution! Sorry for the long post, but I tried to put in as much information as possible.

  In short, I decided to rebuild an old laptop in Windows XP (2006) I (latest updates installed). I'm without audio (cannot find drivers), but this isn't so much a problem. The problem needs to connect to the WiFi.

  The internal WiFi card is an Intel (r) PRO/Wireless 2200BG (or, at least, it's the driver).

  WiFi is displayed as 'Connected' and ' Signal strength: Excellent "(as my laptop is sitting right next to the hub). Ethernet (wired) connection to the hub works perfectly. I have WiFi BT working connects perfectly with my Mac and my iPod, I know that there is absolutely no problem with the router.

  However, my laptop does not seem to want to connect WiFi, despite 'positive' messages above. All browsers (IE, Chrome, Firefox) display a message stating that they cannot connect to the internet. Nothing in browsers suggest that all DNS settings have been changed.

  I * think * the problem might be because the packets sent/received are still very low - if either enter three digits, I have a lot of luck. For now, they are stuck on envoys = 14, received = 3.

  So, what I have checked/tried is the following (all based on Google search) - none have worked:

  (1) I can confirm that the automatic Wireless Configuration is enabled, started and set to automatic, and that Windows is used to set up my network.
  (2) my wireless network appears in my favorite networks and is automatically connected to (or should be :-)) - I have added/removed the connection several times, check the wireless key, every time, without success.)
  (3) the TCP/IP menu is configured to obtain an IP address and a DNS service automatically.
  (4) type ipconfig/all at the command prompt seems to show that everything works OK:

  • The physical address is: 00-16-xx-xx-xx-xx (I removed the last few digits as it is an open forum, but is probably not a security issue)
  • DHCP is enabled.
  • Automatic configuration is enabled.
  • The IP address is 192.xxx.x.xx (as above)
  • Subnet mask is 255.255.255.0
  • Default gateway, DHCP and DNS server are all the 192.xxx.x.xxx (as above)

  However, IP routing is NOT enabled or is Proxy WINS. Node type appears as unknown.

  I tried the DNS, IP address in the command line (don't remember the command), hot flashes reset everything I can think of or have found via an internet search.

  I also tried the two separate Wireless USB key (only install the drivers - now deleted), which is not working.

  I am so right in thinking that everything seems OK, except the transfer of packages very low? Anyone who has any other control I can try - or better yet, a potential solution?

  Thank you!

  Hello c0ley,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:
  Take a look at step 6 in this article that give more details about it:
  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx
  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problems with Outlook Express 6 in Windows XP

  Dear Sir or Madam:

  My friend has problems with his program of Microsoft Outlook Express 6 on Windows XP computer.

  He has saved all his program of Microsoft Outlook Express 6 e-mail messages.

  There are 2 e-mails corrupt in its Outlook Express 6 Inbox folder; He tried opening and remove these 2 emails corrupted in the Inbox folder, which causes the Outlook Express 6 program stops responding and freeze-up Windows XP. He had to click the end task to close immediately the program Outlook Express 6 is not responding in Windows Task Manager.

  It won't reinstall Windows XP on his computer from scratch.

  Please reply back soon.

  Thank you.

  Same question as above, except the deleted items that is now corrupted. Follow the instructions above, but this time remove Remove Items.dbx with OE closed.

  With all the corruption, you might want to consider a new identity that will give you all the new dbx files and a new registry hive.

  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Problem with the virtual store to Windows 7 basic, home

  Hello, I have a problem with Windows 7 64-bit home basic e-store. What happened is that I have a program that I use to make small electronic circuits and it was working fine until a few days when I noticed that the design I was doing seemed to be locked - I can open it but I can't open the second tab of the main window, which I should be able to do. After much research I discovered that the problem was caused by the virtual store of Windows - system registers my designs. I need to disable this feature because it prevents me from doing my work. I tried many things including turning off virtual store in REGEDIT and it doesn't change anything. I have another computer with Windows 7 starter and I have no problem there at all. I searched the internet for ideas and found two to this site http://www.askvg.com/how-to-tweak-user-account-control-uac-options-in-windows-vista-home-basic-home-premium/

  In all no joy. Help, please. I would appreciate only the answers that have been tried and tested not something that is supposed to work.

  Thank you, Ed

  (Moved from Windows |) Windows 7 | Performance and Maintenance)

  I have a program that I use to make small electronic circuits and it was working fine until a few days ago.

  Given that things worked fine until a few days ago I would use system restore to set Windows back a week.