Problem with sculpt ergonomic keyboard.

Similar Questions

• Sculpt ergonomic keyboard does more - batteries becomes extremely hot...

  I have a Sculpt ergonomic keyboard which also comes with a mouse and a keyboard. I only used it for about 3 months. The batteries in the keyboard run out in a few days and I have to replace them very often. This morning the keyboard doesn't quite work. The keyboard and the mouse still work. The batteries become very, very hot and I took now them. Even when I change the batteries in the keyboard does not work at all (I have replaced twice now) and the new batteries heat up less than a minute, so hot I can't touch them. What could be the problem?

  Hello Geriannede,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run the hardware and devices Troubleshooter and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  Please also this link keyboard driver update and verify.
  Reference:
  http://www.Microsoft.com/hardware/en-us/d/sculpt-ergonomic-keyboard-for-business

  Additional information:
  http://www.Microsoft.com/hardware/en-us/help/Windows-8/troubleshooting/keyboard/using-keyboard

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with the ergonomic backlit keyboard.

  Why Microsoft is not dating an informed ergonomic keyboard? I'm so use a your keyboard 4000 and 7000 I don't want go to flat keyboard straight. Once the lighting of graphic works, I used to want to off thus creating a problem to see the keys.

  Glue the rubber pads on the bottom of the keyboard with a more permanent link. They stand out. Make your legs stronger expansion. Break from the mine and I have to paste blocks on.

  Rich

  Hello

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support

  Provide feedback to Microsoft
  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• L5V-00001 Sculpt ergonomic keyboard mouse with KVM and Wireless Office

  Transmitter/receiver plugs directly into the PC, the keyboard and mouse both work very well.

  When the transmitter/receiver plugs into the USB port on the KVM switch, only works for keyboard, the mouse seems dead, but gives PC meet the win button (blue button) on the mouse.

  I have to use KVM in my env work and also really want to use Sculpt costume

  so please help me what KVM switch could support L5V - 00001 Sculpt ergonomic Wireless Desktop

  Hello

  Please contact Microsoft Community.

  I want to tell you that the KVM are you using currently has a problem. All KVM switches generally support the mouse model you mentioned...

  So, you can contact the KVM manufacturer in this regard. Or you can use your favorite search engine to buy a new one.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• BIG PROBLEM with Dell Laptop keyboard - CONTROL seems to be stuck

  The CTRL (left) seems to be stuck in a way. Not like in the operating system that you are stuck where you cannot open stuff but physically. It works and everything, but when I press on the edge of the lower left there feeling like it won't go down any further. Now here's the thing
  I had the EXACT

  Same problem with my ALT key on the top right corner, after hours and hours of press here and find good... The point 'G' {in this term well say it means good} button, who fixed it, but now I have it again with the CTRL key

  and when you tilt your head to the level of keyboards and press gently on the left-hand side of the CTRL key, you will see the L. R left side down and the right side is not, but if I do it with another key to sound normal, balanced sound, pressing on anywhere will descend the whole key.

  Sorry to be paranoid, but it drives me crazy, I don't want to send it in for repair, I tried to drag the undernath paper, there is no food or anything there, I never eat near my laptop - and I tried to suck with vacuum on LOW Power and a sliding brush. Nothing came out. Don't know what to do.

  Any help would be appreciated.

  It won't go down, he's going like halfway and feels more difficult to drive, and I don't want to break it.

  Hello

  There seems to be a hardware problem, I suggest you to contact Dell for assistance.

  http://support.Dell.com/

• Problem with characters special keyboard HP Pavilion DV6-3004TU

  I use a HP Pavilion DV6-3004TU laptop. I just got my Windows 7 Professional installed. When I @ using shift + 2 it shows "(quotes). It is vice versa as well, that is to say, when I type "using Shift ' it displays symbol @." So, I have problem with the hash symbol type. When I hit Shift 3 it shows £ instead of hash symbol. This is a new laptop and I use an external USB keyboard as well for my comfort. This problem is encountered in two keyboards (computer keyboard and keyboard) as well. What should I do now? It became a literal characters, which makes most of the difficult time. Kindly help

  It sounds like the problem of keyboard layout... It seems that your keyboard is set to English UK... to check...

  To check this, click Start, type intl.cpl in the Start Search box, and then press ENTER. On the keyboards and languages tab, click Change keyboards.

  You should see 2 inputs English (United States) and English (United Kingdom). If true, remove English (United Kingdom). Who should take care of it...

• Windows 8 problem with functionality of keyboard backlight radiance on HP envy 17

  Hello

  I upgraded my laptop HP Envy 17 to Windows 8.

  I went and applied all the updates driver provided here for use with Win8.

  The question (more than one gene) implies the radiance keyboard.

  Start-up lighting of the keypad is disabled. When I press the F5 key, the lighting of the keypad is disabled.

  When I press the button once again, lighting is turned on.

  Is there a setting (Panel or registry) I can modify to prevent that from happening.

  Thank you.

  EWO

  Hello Eyes - Wide - Open and jdubs. I understand that after your update of Windows 8 by pressing f (x) keys activate their functions Fn + F (X) instead of their main functions in f (x). Is this correct?
  
  Restart your laptop and enter the BIOS. Go to the section 'System Configuration '. You have enabled or disabled 'key Support Action '?
  
  When this option is simply to press the F key to activate action Fn + F (X). When it is disabled, you need to press Fn + F (X) for it to work. You want to disable it.
  
  After disabling and save your changes, restart the computer once more and then check if the problem has been resolved.
  
  Could Mslopar, you post your complete product for me number? Use this document to locate it.
  
  I hope everyone has a great day.

• Problem with M-Audio keyboard!

  Once I start it works perfect, next time it says error basic midi... Some ideas what's not here? Thanks in advance for the help, CHOSUN

  • Fix permissions of the drive on your system drive. / Applications/utilities/disk utility / (this is called now first aid.)
    • Fix permissions of the drive with disk utility - Apple Support
  • in the preferences of logic-> MIDI-> reset all drivers MIDI
  • If this does not work, try to reconfigure your midi studio Applications/Utilities/Audio MIDI Setup
    • In the top menu: window-> show window MIDI
    • If your keyboard is not in the list, create a new MIDI Setup (Setup-> new Configuration...), name your new configuration and your keyboard should appear.

  Let me know if this helps. If not, try the steps in this thread: https://www.logicprohelp.com/forum/viewtopic.php?f=1 & t = 114380

• Compaq Presario CQ56: a problem with the computer keyboard laptop presario CQ56

  All keys (F) Act as the FN key is been held down when it is not. This just started today. I have a free prog called "keyboard test utility. Now, I have discovered that I can get 1 clean tap of F4 and the prog to test keyboard shows only illuminated F4. The next time I hit the letter (P) F4 and the Windows key are lit. Now, if I tap the FN key, and then press the F4 key. Again, F4 is the only 1 who turned on the prog of test. It's almost like the FN button nosed. I just to confirm. Rather than hold down the FN key to get things under the keys (F) (as a volume-, volume +, cut and so on). Now, I have to hold down the FN key to get the regular F1 to F12 keys. The rest of the keyboard is fine. A regular toggle switch or a switch in a radio push button. The FN key acts like someone ripped the wires to the back of the switch and reverse the wires and the switch can operate in reverse. Beats me how this can happen to a laptop keyboard.

  Steve

  Hello

  Here are a couple of things to try.

  1. judgment of the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  2. try to change the default action of the keys 'f' as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• A problem with + type logitech keyboard and ipad air2

  When using type + keyboard and press the button of the globe the language do not change, it opens the change of instead.doesnt of research it opens instead of research.
  I have to open the keyboardglobe screen and change the language.

  I need to pass the languges while typing of document in pages, notices, etc.

  The button of your globe is probably hard wire to a shortcut that Apple uses more iOS.  Until the machine keyboard fixed that, you should be able to change the keyboard via Ctrl + space.

• S5200-801 satellite: problem with the F5 keyboard shortcut

  Can someone help me - by pressing Fn + F5, I can not change the output to my monitor to my TV-nothing happens

  What should I do

  Thanks in advance
  Vimthe

  Hello

  You need an emulator of Hotkey Utility for display devices. I would recommend reinstalling this application.
  Check if the F5 key will work.

  Visit the page of the Toshiba driver. You can find this driver.

• Sculpt the ergonomic keyboard, adding extra characters

  I'm running Windows 7 Pro x 64 and recently upgraded to date since a former MS ergo keyboard to Sculpt Ergo keyboard. It seems that when I type fast keyboard will add extra ' o Ce would be something like tohis, oou moaybeo something likeo thato. I get the sense that it is a problem of software in the OS, the driver, or internal to the keyboard. It doesn't seem like a double tap issue because rarely is the extra 'o' just after an another 'o'.

  Hi Scott,.

  Thanks for posting your query in Microsoft Community Forum.

  If double letters appear even when you don't think you typos, then Windows keyboard speed could be set too high or there could be something stuck in your keyboard. Try turning upside and it blow. You can search on how to remove the keyboard and clean under them safely.

  Otherwise, I would have you try the following and see if the problem persists.

  Method 1:

  Try the following steps to change deadlines and rates in the arrangements of keyboards.

  1. Click Start, type keyboard and select keyboard in the list of items.
  2. To reduce the problem of double-taps, move the slider to "Repeat Delay" to "Long".
  3. Before clicking 'OK', test the speed again by typing in the empty box within the properties of the keyboard window.

  If the problem persists, try the following method.

  Method 2:

  Try to install the last mouse and keyboard Center and check.

  http://www.Microsoft.com/hardware/en-us/d/sculpt-ergonomic-keyboard-for-business

  (Select Windows 7 (64-bit only) in the list of operating systems).

  If the problem persists, try to contact the Microsoft Hardware support as shown in the following link.

  Microsoft Hardware: Contact us

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

• No CD-ROM with ergonomic keyboard 4000, then things do not work

  Hello Allayas!  :-)

  OK, so I recently bought a:
  Microsoft 4000 ergonomic keyboard

  Only problem is that it didn't come with the CD-ROM, which usually has the drivers, other software/freeware and instructions and so on and so forth.

  IE: for example -.

  • I can't use 5 programmable keys at the top of the keyboard, in the Center, and I think ' they are supposed to be the most important because of their location and so on.
  • The Zoom slider in the middle of the keyboard is ab-so-lute-ly, nada! [Samething goes for the key with the big star on this subject.]
  • Almost all the buttons do nothing. Not at all.
  • more there are things written on the front of the keys, I have no idea what to do with them. They have words like: {copy, paste, cut, search, save, all pointed out, new open, print, italics and they also} a few buttons that work, like, on the F12 key, it says 'print', well I say is for printing

  Is it possible that I can get a 'friend' to post, so I can download the contents of their CD, as everything in a folder and let download me, or you can send it to me to.

  Thank you very much

  I'm Brucie, Morano

  E-mail address is removed from the privacy *.

  P.S. - Do not hesitate to write me a note or an email, if you want to help me oout, OK?

  Hello

  Natural Ergonomic Keyboard 4000<- drivers="" and="" other="" help="" -="" set="" to="" your="">
  Windows under the heading downloads

  https://www.Microsoft.com/accessories/en-us/products/keyboards/natural-ergonomic-keyboard-4000/B2M-00012

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">