L5V-00001 Sculpt ergonomic keyboard mouse with KVM and Wireless Office

Similar Questions

• Sculpt ergonomic keyboard does more - batteries becomes extremely hot...

  I have a Sculpt ergonomic keyboard which also comes with a mouse and a keyboard. I only used it for about 3 months. The batteries in the keyboard run out in a few days and I have to replace them very often. This morning the keyboard doesn't quite work. The keyboard and the mouse still work. The batteries become very, very hot and I took now them. Even when I change the batteries in the keyboard does not work at all (I have replaced twice now) and the new batteries heat up less than a minute, so hot I can't touch them. What could be the problem?

  Hello Geriannede,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run the hardware and devices Troubleshooter and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  Please also this link keyboard driver update and verify.
  Reference:
  http://www.Microsoft.com/hardware/en-us/d/sculpt-ergonomic-keyboard-for-business

  Additional information:
  http://www.Microsoft.com/hardware/en-us/help/Windows-8/troubleshooting/keyboard/using-keyboard

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Combo sculpt comfort keyboard/mouse Microsoft - mouse problem driver windows 7

  Just bought a new combo desktop Microsoft Sculpt comfort (keyboard and mouse). I have a problem with the mouse in Windows 7.

  This mouse has the button scan blue on the left where you can drag upward or down and click. I have this attached to a Dell E6520 laptop.

  In windows 8 the slide it towards the bottom of the function pulls the top of the list of open windows. In Windows 7, it's the browser's "back" button. I installed the latest microsoft mouse and keyboard software 2.3.

  When I first installed the drive, everything works as expected. Suddenly the button works like the browser's "back" button. A few hours later, or after a reboot slide down begins to open the windows instead. The only way to fix is to uninstall the driver and re install. I tried the USB in USB ports and all are working the same.

  How can I solve this problem? I called Microsoft support and they said to return the system and replace it. It is not a hardware problem and return it will do no good.

  Any help would be useful.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  For you help I would be grateful if you could answer the following questions:

  1. you did it all change hardware or software to your computer before this problem?

  2. have you contacted Microsoft Hardware Support?

  Try the procedure described in the following Microsoft Help article.

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  Note: Select the device with which you are having problem with.

  If the problem persists, contact Microsoft Support Hardware for help. This issue may have caused corruption of any driver files, and then will be able to help with this question.

  Hardware support of Microsoft:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the helps of information.

• Problem with sculpt ergonomic keyboard.

  I can't find any light for the locking caps on this keyboard or for Num Lock light on the block of numbers.

  Hello

  Thank you for the update on the issue.

  As you mentioned that everything works correctly instead of no light on the keyboard, this means that either there is no light on the keyboard, or it has been damaged.

  You can find the specifications of material on the manufacturer's website or you can provide us with the make and model of your keyboard, and we will try to find the information available on the web.

  Kind regards.

• Problem with keys of macro keyboard & mouse with the program that is running as an administrator

  I use Microsoft Sidewinder X 4 and X 5. Macro keys work correctly when I run the apps & games without admin, but when I run as administrator, they now work at all.

  With this problem I can't use Garena/TCGnetwork/MMO keys that automatically run as administrator after installed.
  Anyone know how to fix it, or how can I changed it so it will not work as an administrator?
  FYI, it is already disabled for "run as Administrator" in the compatibility properties

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to follow the steps from the link and check.

  Answer chess problems related to the keyboard or the mouse http://support.microsoft.com/kb/838398 troubleshooting wireless wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Method 2:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Wired Keyboard 600 with slow and some keys do not work when I press them.

  I have a microsoft 600 wired keyboard - he constantly young: types, I paid for the download of the driver as I thought that may be the problem, all the drivers are updated, but still get the missing and also slow to react on the keyboard, I think scrolling is very hit and Miss ideas

  Original title: keyboard continually for young

  Hello

  Did you of recent changes to the computer?

  I suggest to follow the steps mentioned in the article.

  Troubleshooting: keyboards

  http://www.Microsoft.com/hardware/en-CA/help/support/troubleshooting/keyboard/common-issues

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Cannot use the mouse with the laptop wireless

  I just bought a laptop. I bought a wireless mouse, but I don't know why it won't let me use it.

  Hello

  1. What is the brand and model of the mouse?

  2. What is the brand and model of the computer?

  3. what operating system you have installed in the computer?

  I suggest you follow the steps described in the methods to solve the problem with the wireless mouse:

  Note: the instructions are applicable to Windows Vista and 7.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Bluetooth devices. Bluetooth devices, the steps may be a bit more detail, and you will need to follow the steps listed in the documentation provided with the device. For additional help with Bluetooth devices, see Add a Bluetooth device to your compatible computer deviceand Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Please post back with the result.

• Coffee spilled on my ergonomic keyboard 4000 MS. v1 and now nothing works.

  I have it rincer rinse with plenty of water, takes off all keys and them rinsed or dried. They all feel good. Use an air hose and blew the 'stuff '. Left in an oven dry very low temp for several hours. Now there are no signs of liquid, but nothing works. When I plug it into the USB port, it looks for and loads the driver, so that he knows the keyboard exists. I have a led of led on on the numeric keypad enter but I can't seem to turn off. Another light on the lock indicator F, but I can't be a stop. But not a single key will work.

  We know if there is that a plant anywhere on reset this model?

  Thank you.

  Bruce

  Hello

  Since the issue is hardware related, you can also get in touch with material support to replace the keyboard and to get help.

  Microsoft Hardware support

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Can I use a deskjet 2545 with usb and wireless

  I have a computer laptop w / wireless and your desktop w/o - How do I use a deskjet 2545 with two computers?

  Hello

  You would add probably twice, a printer each having its own profile.

  This is how works office.

  If in doubt please ask.

• Network with DSL and wireless setup problem

  I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

  Give me some advice on, dsl, wireless configuraion in switches

  Kind regards

  Mohammed

  Used Google...

  http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• OMG just stumbled across a big snag with fusion and MS office products and command.

  Hi all, I would say first of all for the people of VMware - thx for such a cool product that allows me to teach PC products in the community of the classroom with my macbookpro. Lordy, I wouldn't have to use a PC! But, I am a teacher MS 2007 project this week and just noticed that when you select two tasks - just as you select two nonadjacent rows in a table in word or excel, you can't melt! Select the second line task/poster a zoom search icon. ARG. It was very awkward today while I couldn't know how to repair the fusion. Please help before the morning, so I don't look so silly! THX in advance, and sorry this is a common problem. Everything I could find on the subject was that http://communities.vmware.com/docs/DOC-11677;jsessionid=4073120792A5D7C761EEB853F0210173 and I did not really understand it. Cheers,

  Jigs

  Option-control acts as control in windows non - VM.

• You will need to plug like Office XP on my laptop with vista and wireless.

  Use of computer laptop w / wireless internet network. I want to connect my Office Internet his older and running xp sp2. Can I attach the two without a hub? My office has a network ethernet card. I tried to use ics without an ethernet hub and have a wireless network and local network on my laptop to share the internet connection on my desktop. Please let me know if this is possible? PS My neighbor sharing its Wi - Fi connection. Line direct ethernet is therefore not possible

  Your wireless router must have a grasp on what will allow you to connect your computer via wire. Brian Tillman [MVP-Outlook]

• Can a printer works with cable and wireless to two computers?

  I have a HP c309g printer that is connected to a Dell Inspiron computer.  I recently bought a HP laptop.  Is it possible that I can access the printer time Wired for the Dell wireless laptop?  Thanks for your help.

  Well Yes, connect to your wireless network.  From the front of the printer: Setup > network > network Wirleess assistant.

  Now that it is connected to your network, run the HP software on each computer, choose the type of installation 'Network' when asked.

• Firefox crashes whenever I select in the drop-down (mouse on board and wireless, both).

  SOMETIMES if a drop-down list has only a few elements, it does not crash. But inevitably the next drop-down list (for example, the months of the year) was enough to cause the hang up. This has been true through several updates of Firefox. Hope the following fixes this bug. You send me- and more - edge for some sites that do not work on Firefox. Please don't send me away entirely! Thank you.

  https://support.Mozilla.org/en-us/KB/update-Firefox-latest-version 49.0.2

  Start Firefox in Safe Mode {web link} by pressing on the
  (Mac = Options) key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).

  Is always the problem?